|
Size: 2123
Comment:
|
Size: 2871
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 9: | Line 9: |
| === g1=0.994, g2=0.571, 16.875MHz, 45MHz === | ---- === g1>0.994, g2=0.571, 16.875MHz, 45MHz === |
| Line 13: | Line 14: |
| Lengths & Frequencies ||f1||16.881370MHz (3*f2/8)||f2||45.016989MHz||f3||56.271236MHz (10*f2/8)|| ||Larm||3000.0m||Lmc||26.638m|||||| ||Lprc||66.5863m||Lsrc||66.5924m||Las||3.3298m|| ||Lp1||14.75854||Lp2||12.0657m||Lp3||14.7621m|| |
==== Lengths & Frequencies ==== ||f1||16.880962MHz (3*f2/8)||f2||45.015898MHz||f3||56.269873MHz (10*f2/8)|| ||Larm||3000.0m||Lmc||26.639m|||||| ||Lprc||66.591m||Lsrc||66.591m||Las||3.3299m|| ||Lp1||14.7609||Lp2||12.0667m||Lp3||14.7638m|| |
| Line 19: | Line 20: |
| ||Ls1||14.75854m||Ls2||12.0657m||Ls3||14.7621m|| ||Folding angle||0.6957[deg]|||||||||| |
||Ls1||14.7609m||Ls2||12.0667m||Ls3||14.7638m|| ||Folding angle||0.6292[deg]|||||||||| |
| Line 25: | Line 26: |
| Radius of Curvatures (Positive for concave) | ==== Radius of Curvatures (Positive for concave) ==== |
| Line 28: | Line 29: |
| ||PRM||313.8788m||PR2||-3.2547m||PR3||27.36m|| ||SRM||313.8788m||SR2||-3.2547m||SR3||27.36m|| |
||PRM||332.28m||PR2||-3.269m||PR3||27.38m|| ||SRM||332.28m||SR2||-3.269m||SR3||27.38m|| |
| Line 31: | Line 32: |
| Beam Spot Size (1/e^2 radius) ||PRM||4.046mm||PR2||4.046mm||PR3||34.242mm|| ||SRM||4.046mm||SR2||4.046mm||SR3||34.242mm|| |
==== Beam Spot Size (1/e^2 radius) ==== ||ITM||3.43cm||ETM||4.53cm|||||| ||PRM||4.05mm||PR2||4.06mm||PR3||34.25mm|| ||SRM||4.05mm||SR2||4.06mm||SR3||34.25mm|| |
| Line 35: | Line 37: |
| Lens effect (effective focal length seen from the AR side) | ==== Lens effect (effective focal length seen from the AR side) ==== |
| Line 40: | Line 42: |
| ---- | |
| Line 67: | Line 70: |
| ---- | |
| Line 68: | Line 72: |
=== Test Masses === '''ITM''' ||HR Radius of Curvature||1.68(+/-0.008)km||0.5% error|| ||AR Radius of Curvature||Flat (>100km) ||As flat as possible|| ||AR Wedge Angle||0.2+/-0.002deg|| || ||Transmission@1064nm||0.004 +0.001/-0.0|| || ||Transmission asymmetry@1064nm|| 2*|(T1-T2)/(T1+T2)| < 0.01||T1 and T2 are the transmission of two ITMs|| ||Reflection Loss@1064nm||<45ppm|| || ||Transmission@532nm||0.2(+/-0.1)||Transmission of ITM must be larger than ETM@532nm|| ||Transmission asymmetry@532nm||No requirement|| || ||Reflection loss@1064nm||<1%|| || ||AR Reflectivity@1064nm||200(+100/-0)ppm|| || ||AR Reflectivity@532nm||<5%||As small as possible|| |
Actual Optical Parameters of the Main Interferometer
Contents
Optical Parameters
Interferometer Diagram
g1>0.994, g2=0.571, 16.875MHz, 45MHz
This is the parameter set chosen by the MIF group.
Lengths & Frequencies
f1 |
16.880962MHz (3*f2/8) |
f2 |
45.015898MHz |
f3 |
56.269873MHz (10*f2/8) |
Larm |
3000.0m |
Lmc |
26.639m |
||
Lprc |
66.591m |
Lsrc |
66.591m |
Las |
3.3299m |
Lp1 |
14.7609 |
Lp2 |
12.0667m |
Lp3 |
14.7638m |
Lmi |
25m |
Lmx |
26.6649m |
Lmy |
23.3351m |
Ls1 |
14.7609m |
Ls2 |
12.0667m |
Ls3 |
14.7638m |
Folding angle |
0.6292[deg] |
||||
Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.
Radius of Curvatures (Positive for concave)
ITM |
>500km |
ETM |
7000.0m |
||
PRM |
332.28m |
PR2 |
-3.269m |
PR3 |
27.38m |
SRM |
332.28m |
SR2 |
-3.269m |
SR3 |
27.38m |
Beam Spot Size (1/e^2 radius)
ITM |
3.43cm |
ETM |
4.53cm |
||
PRM |
4.05mm |
PR2 |
4.06mm |
PR3 |
34.25mm |
SRM |
4.05mm |
SR2 |
4.06mm |
SR3 |
34.25mm |
Lens effect (effective focal length seen from the AR side)
ITM (Sapphire) |
>666km |
PRM (Silica) |
>10000km |
g1=g2=0.586, 11.25MHz, 45MHz
This is an alternative parameter set. Do not use these parameters.
Lengths & Frequencies
f1 |
11.255822MHz |
f2 |
45.023289MHz |
f3 |
39.395378MHz |
Larm |
3000.0m |
Lmc |
26.634m |
||
Lprc |
73.24838m |
Lsrc |
73.24838m |
Las |
3.3293m |
Lp1 |
16.9798m |
Lp2 |
14.2858m |
Lp3 |
16.9828m |
Lmi |
25m |
Lmx |
26.66465m |
Lmy |
23.33535m |
Ls1 |
16.9798m |
Ls2 |
14.2858m |
Ls3 |
16.9828m |
Radius of Curvatures (Positive for concave)
ITM |
7246.3768m |
ETM |
7246.3768m |
||
PRM |
361.552m |
PR2 |
-3.985m |
PR3 |
32.4m |
SRM |
361.552m |
SR2 |
-3.985m |
SR3 |
32.4m |
Beam Spot Size (1/e^2 radius)
PRM |
4.355mm |
PR2 |
4.355mm |
PR3 |
35.77mm |
SRM |
4.355mm |
SR2 |
4.355mm |
SR3 |
35.77mm |
Lens effect (effective focal length seen from the AR side)
ITM (Sapphire) |
-9610m |
PRM (Silica) |
-765.6m |
Mirror Specs
Test Masses
ITM ||HR Radius of Curvature||1.68(+/-0.008)km||0.5% error||
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
0.2+/-0.002deg |
|
Transmission@1064nm |
0.004 +0.001/-0.0 |
|
Transmission asymmetry@1064nm |
2*|(T1-T2)/(T1+T2)| < 0.01 |
T1 and T2 are the transmission of two ITMs |
Reflection Loss@1064nm |
<45ppm |
|
Transmission@532nm |
0.2(+/-0.1) |
Transmission of ITM must be larger than ETM@532nm |
Transmission asymmetry@532nm |
No requirement |
|
Reflection loss@1064nm |
<1% |
|
AR Reflectivity@1064nm |
200(+100/-0)ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |