Differences between revisions 10 and 30 (spanning 20 versions)
⇤ ← Revision 10 as of 2011-02-16 23:02:53 →
Size: 2123
Editor: YoichiAso
Comment:
← Revision 30 as of 2011-10-14 20:05:55 → ⇥
Size: 3785
Editor: YoichiAso
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Line 7: Line 6:
{{attachment:MIF-diagram.png|MIF Diagram|width=800}} {{attachment:MIF-diagram.png|MIF Diagram|width="800"}}
Line 9: Line 8:
=== g1=0.994, g2=0.571, 16.875MHz, 45MHz ===
 ----
=== g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz ===
Line 13: Line 12:
Lengths & Frequencies
||f1||16.881370MHz (3*f2/8)||f2||45.016989MHz||f3||56.271236MHz (10*f2/8)||
||Larm||3000.0m||Lmc||26.638m||||||
||Lprc||66.5863m||Lsrc||66.5924m||Las||3.3298m||
||Lp1||14.75854||Lp2||12.0657m||Lp3||14.7621m||
||Lmi||25m||Lmx||26.6649m||Lmy||23.3351m||
||Ls1||14.75854m||Ls2||12.0657m||Ls3||14.7621m||
||Folding angle||0.6957[deg]||||||||||		 ==== Lengths & Frequencies ====
||f1 ||16.880962MHz (3*f2/8) ||f2 ||45.015898MHz ||f3 ||56.269873MHz (10*f2/8) ||
||Larm ||3000.0m ||Lmc ||26.639m ||||<style="text-align:center"> ||
||Lprc ||66.591m ||Lsrc ||66.591m ||Las ||3.3299m ||
||Lp1 ||14.7606 ||Lp2 ||11.0669m ||Lp3 ||15.7638m ||
||Lmi ||25m ||Lmx ||26.6649m ||Lmy ||23.3351m ||
||Ls1 ||14.7606m ||Ls2 ||11.0669m ||Ls3 ||15.7638m ||
||Folding angle ||0.6860[deg] ||||||||<style="text-align:center"> ||
Line 22: Line 21:
Folding angle is an incident angle of the beam
to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.
Line 25: Line 22:
Radius of Curvatures (Positive for concave) Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.
Line 27: Line 24:
||ITM||>500km||ETM||7000.0m||||||
||PRM||313.8788m||PR2||-3.2547m||PR3||27.36m||
||SRM||313.8788m||SR2||-3.2547m||SR3||27.36m||		 ==== Radius of Curvatures (Positive for concave) ====
||ITM ||1680.0m ||ETM ||1870.0m ||||<style="text-align:center"> ||
||PRM ||303.96m ||PR2 ||-2.7628m ||PR3 ||24.574m ||
||SRM ||303.96m ||SR2 ||-2.7764m ||SR3 ||24.584m ||
Line 31: Line 29:
Beam Spot Size (1/e^2 radius)
||PRM||4.046mm||PR2||4.046mm||PR3||34.242mm||
||SRM||4.046mm||SR2||4.046mm||SR3||34.242mm||
 
Lens effect (effective focal length seen from the AR side)
Line 37: Line 30:
||ITM (Sapphire)||>666km||
||PRM (Silica)||>10000km||		 ==== Beam Spot Size (1/e^2 radius) ====
||ITM ||35.064mm ||ETM ||39.983mm ||||<style="text-align:center"> ||
||PRM ||4.030mm ||PR2 ||4.030mm ||PR3 ||36.479mm ||
||SRM ||4.031mm ||SR2 ||4.031mm ||SR3 ||36.327mm ||
Line 40: Line 35:
=== g1=g2=0.586, 11.25MHz, 45MHz ===
This is an alternative parameter set.
Do not use these parameters.
Line 44: Line 36:
Lengths & Frequencies
||f1||11.255822MHz||f2||45.023289MHz||f3||39.395378MHz||
||Larm||3000.0m||Lmc||26.634m||||||
||Lprc||73.24838m||Lsrc||73.24838m||Las||3.3293m||
||Lp1||16.9798m||Lp2||14.2858m||Lp3||16.9828m||
||Lmi||25m||Lmx||26.66465m||Lmy||23.33535m||
||Ls1||16.9798m||Ls2||14.2858m||Ls3||16.9828m||		 ----
== Mirror Specs ==
=== Test Masses ===
'''ITM'''
||HR Radius of Curvature ||1.68(+/-0.008)km ||0.5% error ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||0.2+/-0.002deg || ||
||Transmission@1064nm ||0.004 +0.001/-0.0 || ||
||Transmission asymmetry@1064nm ||2*|(T1-T2)/(T1+T2)| < 0.01 ||T1 and T2 are the transmission of two ITMs ||
||HR Loss@1064nm ||<45ppm || ||
||Transmission@532nm ||0.2(+/-0.1) ||Transmission of ITM must be larger than ETM@532nm ||
||Transmission asymmetry@532nm ||No requirement || ||
||HR Loss@532nm ||<1% || ||
||AR Reflectivity@1064nm ||200(+100/-0)ppm || ||
||AR Reflectivity@532nm ||<5% ||As small as possible ||
Line 52: Line 52:
Radius of Curvatures (Positive for concave)
Line 54: Line 53:
||ITM||7246.3768m||ETM||7246.3768m||||||
||PRM||361.552m||PR2||-3.985m||PR3||32.4m||
||SRM||361.552m||SR2||-3.985m||SR3||32.4m||
Line 58: Line 54:
Beam Spot Size (1/e^2 radius)
||PRM||4.355mm||PR2||4.355mm||PR3||35.77mm||
||SRM||4.355mm||SR2||4.355mm||SR3||35.77mm||
 
Lens effect (effective focal length seen from the AR side)
Line 64: Line 55:
||ITM (Sapphire)||-9610m||
||PRM (Silica)||-765.6m||		 '''ETM'''
||HR Radius of Curvature ||1.87(+/-0.009)km ||0.5% error ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||0.2+/-0.1deg || ||
||Transmission@1064nm ||5ppm < T < 10ppm || ||
||Transmission asymmetry@1064nm ||2*|(T1-T2)/(T1+T2)| < 0.01 ||Best Effort ||
||HR Loss@1064nm ||<45ppm || ||
||Transmission@532nm ||0.2(+/-0.01) ||Transmission of ETM must be smaller than ITM@532nm ||
||Transmission asymmetry@532nm ||No requirement || ||
||HR Loss@532nm ||<1% || ||
||AR Reflectivity@1064nm ||<50ppm || ||
||AR Reflectivity@532nm ||<5% ||As small as possible ||
Line 67: Line 68:
== Mirror Specs ==
'''PRM'''
||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||TBD || ||
||Transmission@1064nm ||0.1(+0.001/-0.0) || ||
||HR Loss@1064nm ||<45ppm || ||
||AR Reflectivity@1064nm ||<50ppm || ||

'''SRM'''
||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||TBD || ||
||Transmission@1064nm ||0.1536(+/-0.001) || ||
||HR Loss@1064nm ||<45ppm || ||
||AR Reflectivity@1064nm ||<50ppm || ||

'''PR2'''
||HR Radius of Curvature ||-2.763(+/-0.01)m ||0.5% error ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||TBD || ||
||Transmission@1064nm ||500ppm(+/-50ppm) || ||
||HR Loss@1064nm ||<45ppm || ||
||Transmission@532nm ||> 0.5 ||As large as possible ||
||Transmission asymmetry@532nm ||No requirement || ||
||HR Loss@532nm ||<1% || ||
||AR Reflectivity@1064nm ||<50ppm || ||
||AR Reflectivity@532nm ||<5% ||As small as possible ||

Actual Optical Parameters of the Main Interferometer

Contents

  1. Actual Optical Parameters of the Main Interferometer
    1. Optical Parameters
      1. Interferometer Diagram
      2. g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz
    2. Mirror Specs
      1. Test Masses

Optical Parameters

Interferometer Diagram

MIF Diagram

g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz

This is the parameter set chosen by the MIF group.

Lengths & Frequencies

f1

16.880962MHz (3*f2/8)

f2

45.015898MHz

f3

56.269873MHz (10*f2/8)

Larm

3000.0m

Lmc

26.639m

Lprc

66.591m

Lsrc

66.591m

Las

3.3299m

Lp1

14.7606

Lp2

11.0669m

Lp3

15.7638m

Lmi

25m

Lmx

26.6649m

Lmy

23.3351m

Ls1

14.7606m

Ls2

11.0669m

Ls3

15.7638m

Folding angle

0.6860[deg]

Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.

Radius of Curvatures (Positive for concave)

ITM

1680.0m

ETM

1870.0m

PRM

303.96m

PR2

-2.7628m

PR3

24.574m

SRM

303.96m

SR2

-2.7764m

SR3

24.584m

Beam Spot Size (1/e^2 radius)

ITM

35.064mm

ETM

39.983mm

PRM

4.030mm

PR2

4.030mm

PR3

36.479mm

SRM

4.031mm

SR2

4.031mm

SR3

36.327mm

Mirror Specs

Test Masses

ITM

HR Radius of Curvature

1.68(+/-0.008)km

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

0.2+/-0.002deg

Transmission@1064nm

0.004 +0.001/-0.0

Transmission asymmetry@1064nm

2*|(T1-T2)/(T1+T2)| < 0.01

T1 and T2 are the transmission of two ITMs

HR Loss@1064nm

<45ppm

Transmission@532nm

0.2(+/-0.1)

Transmission of ITM must be larger than ETM@532nm

Transmission asymmetry@532nm

No requirement

HR Loss@532nm

<1%

AR Reflectivity@1064nm

200(+100/-0)ppm

AR Reflectivity@532nm

<5%

As small as possible

ETM

HR Radius of Curvature

1.87(+/-0.009)km

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

0.2+/-0.1deg

Transmission@1064nm

5ppm < T < 10ppm

Transmission asymmetry@1064nm

2*|(T1-T2)/(T1+T2)| < 0.01

Best Effort

HR Loss@1064nm

<45ppm

Transmission@532nm

0.2(+/-0.01)

Transmission of ETM must be smaller than ITM@532nm

Transmission asymmetry@532nm

No requirement

HR Loss@532nm

<1%

AR Reflectivity@1064nm

<50ppm

AR Reflectivity@532nm

<5%

As small as possible

PRM

HR Radius of Curvature

303.96m(+/-1.5)m

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

0.1(+0.001/-0.0)

HR Loss@1064nm

<45ppm

AR Reflectivity@1064nm

<50ppm

SRM

HR Radius of Curvature

303.96m(+/-1.5)m

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

0.1536(+/-0.001)

HR Loss@1064nm

<45ppm

AR Reflectivity@1064nm

<50ppm

PR2

HR Radius of Curvature

-2.763(+/-0.01)m

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

500ppm(+/-50ppm)

HR Loss@1064nm

<45ppm

Transmission@532nm

> 0.5

As large as possible

Transmission asymmetry@532nm

No requirement

HR Loss@532nm

<1%

AR Reflectivity@1064nm

<50ppm

AR Reflectivity@532nm

<5%

As small as possible

LCGT/subgroup/ifo/MIF/OptParam (last edited 2021-12-22 14:33:51 by YoichiAso)