Size: 2199
Comment:
|
Size: 3785
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 2: | Line 2: |
Line 7: | Line 6: |
{{attachment:MIF-diagram.png|MIF Diagram|width=800}} | {{attachment:MIF-diagram.png|MIF Diagram|width="800"}} |
Line 10: | Line 9: |
=== g1>0.994, g2=0.571, 16.875MHz, 45MHz === |
=== g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz === |
Line 15: | Line 13: |
||f1||16.880962MHz (3*f2/8)||f2||45.015898MHz||f3||56.269873MHz (10*f2/8)|| ||Larm||3000.0m||Lmc||26.639m|||||| ||Lprc||66.591m||Lsrc||66.591m||Las||3.3299m|| ||Lp1||14.7609||Lp2||12.0667m||Lp3||14.7638m|| ||Lmi||25m||Lmx||26.6649m||Lmy||23.3351m|| ||Ls1||14.7609m||Ls2||12.0667m||Ls3||14.7638m|| ||Folding angle||0.6292[deg]|||||||||| |
||f1 ||16.880962MHz (3*f2/8) ||f2 ||45.015898MHz ||f3 ||56.269873MHz (10*f2/8) || ||Larm ||3000.0m ||Lmc ||26.639m ||||<style="text-align:center"> || ||Lprc ||66.591m ||Lsrc ||66.591m ||Las ||3.3299m || ||Lp1 ||14.7606 ||Lp2 ||11.0669m ||Lp3 ||15.7638m || ||Lmi ||25m ||Lmx ||26.6649m ||Lmy ||23.3351m || ||Ls1 ||14.7606m ||Ls2 ||11.0669m ||Ls3 ||15.7638m || ||Folding angle ||0.6860[deg] ||||||||<style="text-align:center"> || |
Line 23: | Line 21: |
Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle. |
Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle. |
Line 27: | Line 25: |
||ITM ||1680.0m ||ETM ||1870.0m ||||<style="text-align:center"> || ||PRM ||303.96m ||PR2 ||-2.7628m ||PR3 ||24.574m || ||SRM ||303.96m ||SR2 ||-2.7764m ||SR3 ||24.584m || |
|
Line 28: | Line 29: |
||ITM||>500km||ETM||7000.0m|||||| ||PRM||332.28m||PR2||-3.269m||PR3||27.38m|| ||SRM||332.28m||SR2||-3.269m||SR3||27.38m|| |
|
Line 33: | Line 31: |
||ITM||3.43cm||ETM||4.53cm|||||| ||PRM||4.05mm||PR2||4.06mm||PR3||34.25mm|| ||SRM||4.05mm||SR2||4.06mm||SR3||34.25mm|| ==== Lens effect (effective focal length seen from the AR side) ==== |
||ITM ||35.064mm ||ETM ||39.983mm ||||<style="text-align:center"> || ||PRM ||4.030mm ||PR2 ||4.030mm ||PR3 ||36.479mm || ||SRM ||4.031mm ||SR2 ||4.031mm ||SR3 ||36.327mm || |
Line 39: | Line 35: |
||ITM (Sapphire)||>666km|| ||PRM (Silica)||>10000km|| ---- === g1=g2=0.586, 11.25MHz, 45MHz === This is an alternative parameter set. Do not use these parameters. Lengths & Frequencies ||f1||11.255822MHz||f2||45.023289MHz||f3||39.395378MHz|| ||Larm||3000.0m||Lmc||26.634m|||||| ||Lprc||73.24838m||Lsrc||73.24838m||Las||3.3293m|| ||Lp1||16.9798m||Lp2||14.2858m||Lp3||16.9828m|| ||Lmi||25m||Lmx||26.66465m||Lmy||23.33535m|| ||Ls1||16.9798m||Ls2||14.2858m||Ls3||16.9828m|| Radius of Curvatures (Positive for concave) ||ITM||7246.3768m||ETM||7246.3768m|||||| ||PRM||361.552m||PR2||-3.985m||PR3||32.4m|| ||SRM||361.552m||SR2||-3.985m||SR3||32.4m|| Beam Spot Size (1/e^2 radius) ||PRM||4.355mm||PR2||4.355mm||PR3||35.77mm|| ||SRM||4.355mm||SR2||4.355mm||SR3||35.77mm|| Lens effect (effective focal length seen from the AR side) ||ITM (Sapphire)||-9610m|| ||PRM (Silica)||-765.6m|| |
|
Line 72: | Line 38: |
=== Test Masses === '''ITM''' ||HR Radius of Curvature ||1.68(+/-0.008)km ||0.5% error || ||AR Radius of Curvature ||Flat (>100km) ||As flat as possible || ||AR Wedge Angle ||0.2+/-0.002deg || || ||Transmission@1064nm ||0.004 +0.001/-0.0 || || ||Transmission asymmetry@1064nm ||2*|(T1-T2)/(T1+T2)| < 0.01 ||T1 and T2 are the transmission of two ITMs || ||HR Loss@1064nm ||<45ppm || || ||Transmission@532nm ||0.2(+/-0.1) ||Transmission of ITM must be larger than ETM@532nm || ||Transmission asymmetry@532nm ||No requirement || || ||HR Loss@532nm ||<1% || || ||AR Reflectivity@1064nm ||200(+100/-0)ppm || || ||AR Reflectivity@532nm ||<5% ||As small as possible || '''ETM''' ||HR Radius of Curvature ||1.87(+/-0.009)km ||0.5% error || ||AR Radius of Curvature ||Flat (>100km) ||As flat as possible || ||AR Wedge Angle ||0.2+/-0.1deg || || ||Transmission@1064nm ||5ppm < T < 10ppm || || ||Transmission asymmetry@1064nm ||2*|(T1-T2)/(T1+T2)| < 0.01 ||Best Effort || ||HR Loss@1064nm ||<45ppm || || ||Transmission@532nm ||0.2(+/-0.01) ||Transmission of ETM must be smaller than ITM@532nm || ||Transmission asymmetry@532nm ||No requirement || || ||HR Loss@532nm ||<1% || || ||AR Reflectivity@1064nm ||<50ppm || || ||AR Reflectivity@532nm ||<5% ||As small as possible || '''PRM''' ||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error || ||AR Radius of Curvature ||Flat (>100km) ||As flat as possible || ||AR Wedge Angle ||TBD || || ||Transmission@1064nm ||0.1(+0.001/-0.0) || || ||HR Loss@1064nm ||<45ppm || || ||AR Reflectivity@1064nm ||<50ppm || || '''SRM''' ||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error || ||AR Radius of Curvature ||Flat (>100km) ||As flat as possible || ||AR Wedge Angle ||TBD || || ||Transmission@1064nm ||0.1536(+/-0.001) || || ||HR Loss@1064nm ||<45ppm || || ||AR Reflectivity@1064nm ||<50ppm || || '''PR2''' ||HR Radius of Curvature ||-2.763(+/-0.01)m ||0.5% error || ||AR Radius of Curvature ||Flat (>100km) ||As flat as possible || ||AR Wedge Angle ||TBD || || ||Transmission@1064nm ||500ppm(+/-50ppm) || || ||HR Loss@1064nm ||<45ppm || || ||Transmission@532nm ||> 0.5 ||As large as possible || ||Transmission asymmetry@532nm ||No requirement || || ||HR Loss@532nm ||<1% || || ||AR Reflectivity@1064nm ||<50ppm || || ||AR Reflectivity@532nm ||<5% ||As small as possible || |
Actual Optical Parameters of the Main Interferometer
Contents
Optical Parameters
Interferometer Diagram
g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz
This is the parameter set chosen by the MIF group.
Lengths & Frequencies
f1 |
16.880962MHz (3*f2/8) |
f2 |
45.015898MHz |
f3 |
56.269873MHz (10*f2/8) |
Larm |
3000.0m |
Lmc |
26.639m |
|
|
Lprc |
66.591m |
Lsrc |
66.591m |
Las |
3.3299m |
Lp1 |
14.7606 |
Lp2 |
11.0669m |
Lp3 |
15.7638m |
Lmi |
25m |
Lmx |
26.6649m |
Lmy |
23.3351m |
Ls1 |
14.7606m |
Ls2 |
11.0669m |
Ls3 |
15.7638m |
Folding angle |
0.6860[deg] |
|
Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.
Radius of Curvatures (Positive for concave)
ITM |
1680.0m |
ETM |
1870.0m |
|
|
PRM |
303.96m |
PR2 |
-2.7628m |
PR3 |
24.574m |
SRM |
303.96m |
SR2 |
-2.7764m |
SR3 |
24.584m |
Beam Spot Size (1/e^2 radius)
ITM |
35.064mm |
ETM |
39.983mm |
|
|
PRM |
4.030mm |
PR2 |
4.030mm |
PR3 |
36.479mm |
SRM |
4.031mm |
SR2 |
4.031mm |
SR3 |
36.327mm |
Mirror Specs
Test Masses
ITM
HR Radius of Curvature |
1.68(+/-0.008)km |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
0.2+/-0.002deg |
|
Transmission@1064nm |
0.004 +0.001/-0.0 |
|
Transmission asymmetry@1064nm |
2*|(T1-T2)/(T1+T2)| < 0.01 |
T1 and T2 are the transmission of two ITMs |
HR Loss@1064nm |
<45ppm |
|
Transmission@532nm |
0.2(+/-0.1) |
Transmission of ITM must be larger than ETM@532nm |
Transmission asymmetry@532nm |
No requirement |
|
HR Loss@532nm |
<1% |
|
AR Reflectivity@1064nm |
200(+100/-0)ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |
ETM
HR Radius of Curvature |
1.87(+/-0.009)km |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
0.2+/-0.1deg |
|
Transmission@1064nm |
5ppm < T < 10ppm |
|
Transmission asymmetry@1064nm |
2*|(T1-T2)/(T1+T2)| < 0.01 |
Best Effort |
HR Loss@1064nm |
<45ppm |
|
Transmission@532nm |
0.2(+/-0.01) |
Transmission of ETM must be smaller than ITM@532nm |
Transmission asymmetry@532nm |
No requirement |
|
HR Loss@532nm |
<1% |
|
AR Reflectivity@1064nm |
<50ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |
PRM
HR Radius of Curvature |
303.96m(+/-1.5)m |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
TBD |
|
Transmission@1064nm |
0.1(+0.001/-0.0) |
|
HR Loss@1064nm |
<45ppm |
|
AR Reflectivity@1064nm |
<50ppm |
|
SRM
HR Radius of Curvature |
303.96m(+/-1.5)m |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
TBD |
|
Transmission@1064nm |
0.1536(+/-0.001) |
|
HR Loss@1064nm |
<45ppm |
|
AR Reflectivity@1064nm |
<50ppm |
|
PR2
HR Radius of Curvature |
-2.763(+/-0.01)m |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
TBD |
|
Transmission@1064nm |
500ppm(+/-50ppm) |
|
HR Loss@1064nm |
<45ppm |
|
Transmission@532nm |
> 0.5 |
As large as possible |
Transmission asymmetry@532nm |
No requirement |
|
HR Loss@532nm |
<1% |
|
AR Reflectivity@1064nm |
<50ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |