Differences between revisions 31 and 38 (spanning 7 versions)
⇤ ← Revision 31 as of 2011-10-14 20:22:39 →
Size: 5141
Editor: YoichiAso
Comment:
← Revision 38 as of 2012-06-23 15:14:32 → ⇥
Size: 5824
Editor: YoichiAso
Comment:
Deletions are marked like this. Additions are marked like this.
Line 8: Line 8:
Note: In this figure POP is taken at the transmission of PR3, because it is easier to draw. In reality, POP will be taken at the transmission of PR2.
Line 16: Line 17:
||Lp1 ||14.7606 ||Lp2 ||11.0669m ||Lp3 ||15.7638m || ||Lp1 ||14.7615 ||Lp2 ||11.0661m ||Lp3 ||15.7638m ||
Line 18: Line 19:
||Ls1 ||14.7606m ||Ls2 ||11.0669m ||Ls3 ||15.7638m ||
||Folding angle ||0.6860[deg] ||||||||<style="text-align:center"> ||		 ||Ls1 ||14.7412m ||Ls2 ||11.1115m ||Ls3 ||15.7386m ||
||Folding Angle||||||||||<style="text-align:center"> ||
Line 25: Line 26:
||ITM ||1680.0m ||ETM ||1870.0m ||||<style="text-align:center"> ||
||PRM ||303.96m ||PR2 ||-2.7628m ||PR3 ||24.574m ||
||SRM ||303.96m ||SR2 ||-2.7764m ||SR3 ||24.584m ||		 ||ITM ||1900.0m ||ETM ||1900.0m ||||<style="text-align:center"> ||
||PRM ||458.1285m ||PR2 ||-3.0764m ||PR3 ||24.9165m ||
||SRM ||458.1285m ||SR2 ||-2.9872m ||SR3 ||24.9165m ||
Line 31: Line 32:
||ITM ||35.064mm ||ETM ||39.983mm ||||<style="text-align:center"> ||
||PRM ||4.030mm ||PR2 ||4.030mm ||PR3 ||36.479mm ||
||SRM ||4.031mm ||SR2 ||4.031mm ||SR3 ||36.327mm ||		 ||ITM ||35.3mm ||ETM ||35.3mm ||||<style="text-align:center"> ||
||PRM ||4.457mm ||PR2 ||4.457mm ||PR3 ||36.639mm ||
||SRM ||4.308mm ||SR2 ||4.328mm ||SR3 ||36.666mm ||
Line 40: Line 41:
||HR Radius of Curvature ||1.68(+/-0.008)km ||0.5% error || ||HR Radius of Curvature ||1.90(+/-0.0095)km ||0.5% error ||
Line 42: Line 43:
||AR Wedge Angle ||0.2+/-0.002deg || || ||AR Wedge Angle ||0.025+/-0.002deg || ||
Line 56: Line 57:
||HR Radius of Curvature ||1.87(+/-0.009)km ||0.5% error || ||HR Radius of Curvature ||1.9(+/-0.0095)km ||0.5% error ||
Line 68: Line 69:



'''BS'''
||Diameter ||370mm +/- 0.25mm || ||
||Thickness ||80mm +/- 0.5mm || ||
||HR Radius of Curvature ||Flat (>500km) ||As flat as possible ||
||AR Radius of Curvature ||Flat (>500km) ||As flat as possible ||
||AR Wedge Angle ||0.08+/-0.002deg || ||
||Incident Angle ||44.9684deg +/-0.05deg || ||
||Transmission@1064nm ||50% +/-1% || ||
||HR Loss@1064nm ||<100ppm || ||
||Transmission@532nm ||>0.9 || ||
||HR Loss@532nm ||<1% || ||
||AR Reflectivity@1064nm ||<50ppm || ||
||AR Reflectivity@532nm ||<5% ||As small as possible ||
Line 69: Line 88:
||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error || ||HR Radius of Curvature ||458.1285m(+/-2.3)m ||0.5% error ||
Line 76: Line 95:


Line 77: Line 99:
||HR Radius of Curvature ||-2.763(+/-0.01)m ||0.5% error || ||HR Radius of Curvature ||-3.0764(+/-0.01)m || ||
Line 84: Line 106:
||AR Reflectivity@1064nm ||<1000ppm ||As small as possible|| ||AR Reflectivity@1064nm ||<1000ppm ||As small as possible ||
Line 87: Line 109:
Line 88: Line 111:
||HR Radius of Curvature ||24.57(+/-0.1)m ||0.5% error || ||HR Radius of Curvature ||24.9165(+/-0.01)m || ||
Line 95: Line 118:
||AR Reflectivity@1064nm ||<1000ppm ||As small as possible|| ||AR Reflectivity@1064nm ||<1000ppm ||As small as possible ||
Line 99: Line 122:

Line 100: Line 125:
||HR Radius of Curvature ||303.96m(+/-1.5)m ||0.5% error || ||HR Radius of Curvature ||458.1285m(+/-2.3)m ||0.5% error ||
Line 107: Line 132:
Line 108: Line 134:
||HR Radius of Curvature ||-2.776(+/-0.01)m ||0.5% error || ||HR Radius of Curvature ||-2.9872(+/-0.01)m ||||
Line 115: Line 141:
||AR Reflectivity@1064nm ||<1000ppm ||As small as possible|| ||AR Reflectivity@1064nm ||<1000ppm ||As small as possible ||
Line 119: Line 145:
||HR Radius of Curvature ||24.58(+/-0.1)m ||0.5% error || ||HR Radius of Curvature ||24.9165(+/-0.01)m ||||
Line 126: Line 152:
||AR Reflectivity@1064nm ||<1000ppm ||As small as possible|| ||AR Reflectivity@1064nm ||<1000ppm ||As small as possible ||
Line 128: Line 154:

Actual Optical Parameters of the Main Interferometer

Contents

  1. Actual Optical Parameters of the Main Interferometer
    1. Optical Parameters
      1. Interferometer Diagram
      2. g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz
    2. Mirror Specs
      1. Test Masses

Optical Parameters

Interferometer Diagram

MIF Diagram

Note: In this figure POP is taken at the transmission of PR3, because it is easier to draw. In reality, POP will be taken at the transmission of PR2.

g1=-0.7857, g2=-0.6043, 16.875MHz, 45MHz

This is the parameter set chosen by the MIF group.

Lengths & Frequencies

f1

16.880962MHz (3*f2/8)

f2

45.015898MHz

f3

56.269873MHz (10*f2/8)

Larm

3000.0m

Lmc

26.639m

Lprc

66.591m

Lsrc

66.591m

Las

3.3299m

Lp1

14.7615

Lp2

11.0661m

Lp3

15.7638m

Lmi

25m

Lmx

26.6649m

Lmy

23.3351m

Ls1

14.7412m

Ls2

11.1115m

Ls3

15.7386m

Folding Angle

Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.

Radius of Curvatures (Positive for concave)

ITM

1900.0m

ETM

1900.0m

PRM

458.1285m

PR2

-3.0764m

PR3

24.9165m

SRM

458.1285m

SR2

-2.9872m

SR3

24.9165m

Beam Spot Size (1/e^2 radius)

ITM

35.3mm

ETM

35.3mm

PRM

4.457mm

PR2

4.457mm

PR3

36.639mm

SRM

4.308mm

SR2

4.328mm

SR3

36.666mm

Mirror Specs

Test Masses

ITM

HR Radius of Curvature

1.90(+/-0.0095)km

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

0.025+/-0.002deg

Transmission@1064nm

0.004 +0.001/-0.0

Transmission asymmetry@1064nm

2*|(T1-T2)/(T1+T2)| < 0.01

T1 and T2 are the transmission of two ITMs

HR Loss@1064nm

<45ppm

Transmission@532nm

0.2(+/-0.1)

Transmission of ITM must be larger than ETM@532nm

Transmission asymmetry@532nm

No requirement

HR Loss@532nm

<1%

AR Reflectivity@1064nm

200(+100/-0)ppm

AR Reflectivity@532nm

<5%

As small as possible

ETM

HR Radius of Curvature

1.9(+/-0.0095)km

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

0.2+/-0.1deg

Transmission@1064nm

5ppm < T < 10ppm

Transmission asymmetry@1064nm

2*|(T1-T2)/(T1+T2)| < 0.01

Best Effort

HR Loss@1064nm

<45ppm

Transmission@532nm

0.2(+/-0.01)

Transmission of ETM must be smaller than ITM@532nm

Transmission asymmetry@532nm

No requirement

HR Loss@532nm

<1%

AR Reflectivity@1064nm

<50ppm

AR Reflectivity@532nm

<5%

As small as possible

BS

Diameter

370mm +/- 0.25mm

Thickness

80mm +/- 0.5mm

HR Radius of Curvature

Flat (>500km)

As flat as possible

AR Radius of Curvature

Flat (>500km)

As flat as possible

AR Wedge Angle

0.08+/-0.002deg

Incident Angle

44.9684deg +/-0.05deg

Transmission@1064nm

50% +/-1%

HR Loss@1064nm

<100ppm

Transmission@532nm

>0.9

HR Loss@532nm

<1%

AR Reflectivity@1064nm

<50ppm

AR Reflectivity@532nm

<5%

As small as possible

PRM

HR Radius of Curvature

458.1285m(+/-2.3)m

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

0.1(+0.001/-0.0)

HR Loss@1064nm

<45ppm

AR Reflectivity@1064nm

<50ppm

PR2

HR Radius of Curvature

-3.0764(+/-0.01)m

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

500ppm(+/-50ppm)

HR Loss@1064nm

<45ppm

Transmission@532nm

> 0.5

As large as possible

HR Loss@532nm

<10%

AR Reflectivity@1064nm

<1000ppm

As small as possible

AR Reflectivity@532nm

<5%

As small as possible

PR3

HR Radius of Curvature

24.9165(+/-0.01)m

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

<50ppm

As small as possible

HR Loss@1064nm

<45ppm

Transmission@532nm

< 0.1

As small as possible

HR Loss@532nm

<10%

AR Reflectivity@1064nm

<1000ppm

As small as possible

AR Reflectivity@532nm

<5%

As small as possible

SRM

HR Radius of Curvature

458.1285m(+/-2.3)m

0.5% error

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

0.1536(+/-0.001)

HR Loss@1064nm

<45ppm

AR Reflectivity@1064nm

<50ppm

SR2

HR Radius of Curvature

-2.9872(+/-0.01)m

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

500ppm(+/-50ppm)

HR Loss@1064nm

<45ppm

Transmission@532nm

> 0.5

As large as possible

HR Loss@532nm

<10%

AR Reflectivity@1064nm

<1000ppm

As small as possible

AR Reflectivity@532nm

<5%

As small as possible

SR3

HR Radius of Curvature

24.9165(+/-0.01)m

AR Radius of Curvature

Flat (>100km)

As flat as possible

AR Wedge Angle

TBD

Transmission@1064nm

<50ppm

As small as possible

HR Loss@1064nm

<45ppm

Transmission@532nm

< 0.1

As small as possible

HR Loss@532nm

<10%

AR Reflectivity@1064nm

<1000ppm

As small as possible

AR Reflectivity@532nm

<5%

As small as possible

LCGT/subgroup/ifo/MIF/OptParam (last edited 2021-12-22 14:33:51 by YoichiAso)