|
Size: 891
Comment:
|
Size: 3484
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 9: | Line 9: |
| ---- === g1>0.994, g2=0.571, 16.875MHz, 45MHz === This is the parameter set chosen by the MIF group. ==== Lengths & Frequencies ==== ||f1||16.880962MHz (3*f2/8)||f2||45.015898MHz||f3||56.269873MHz (10*f2/8)|| ||Larm||3000.0m||Lmc||26.639m|||||| ||Lprc||66.591m||Lsrc||66.591m||Las||3.3299m|| ||Lp1||14.7609||Lp2||12.0667m||Lp3||14.7638m|| ||Lmi||25m||Lmx||26.6649m||Lmy||23.3351m|| ||Ls1||14.7609m||Ls2||12.0667m||Ls3||14.7638m|| ||Folding angle||0.6292[deg]|||||||||| Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle. ==== Radius of Curvatures (Positive for concave) ==== ||ITM||>500km||ETM||7000.0m|||||| ||PRM||332.28m||PR2||-3.269m||PR3||27.38m|| ||SRM||332.28m||SR2||-3.269m||SR3||27.38m|| ==== Beam Spot Size (1/e^2 radius) ==== ||ITM||3.43cm||ETM||4.53cm|||||| ||PRM||4.05mm||PR2||4.06mm||PR3||34.25mm|| ||SRM||4.05mm||SR2||4.06mm||SR3||34.25mm|| ==== Lens effect (effective focal length seen from the AR side) ==== ||ITM (Sapphire)||>666km|| ||PRM (Silica)||>10000km|| ---- |
|
| Line 10: | Line 44: |
| This is an alternative parameter set. Do not use these parameters. |
|
| Line 13: | Line 49: |
| ||Larm||3000.0m||Lmc||26.634m|||||| | |
| Line 14: | Line 51: |
| ||Lp1||17.04838m||Lp2||14.1m||Lp3||17.1m|| | ||Lp1||16.9798m||Lp2||14.2858m||Lp3||16.9828m|| |
| Line 16: | Line 53: |
| ||Ls1||17.04838m||Ls2||14.1m||Ls3||17.1m|| | ||Ls1||16.9798m||Ls2||14.2858m||Ls3||16.9828m|| |
| Line 20: | Line 57: |
| ||PRM||344.518m||PR2||-3.919m||PR3||31.970m|| ||SRM||344.518m||SR2||-3.919m||SR3||31.970m|| |
||ITM||7246.3768m||ETM||7246.3768m|||||| ||PRM||361.552m||PR2||-3.985m||PR3||32.4m|| ||SRM||361.552m||SR2||-3.985m||SR3||32.4m|| |
| Line 24: | Line 62: |
| ||PRM||4.35mm||PR2||4.34mm||PR3||35.77mm|| ||SRM||4.35mm||SR2||4.34mm||SR3||35.77mm|| |
||PRM||4.355mm||PR2||4.355mm||PR3||35.77mm|| ||SRM||4.355mm||SR2||4.355mm||SR3||35.77mm|| |
| Line 27: | Line 65: |
| Lens effect (effective focal length) | Lens effect (effective focal length seen from the AR side) |
| Line 32: | Line 70: |
| ---- | |
| Line 33: | Line 72: |
=== Test Masses === '''ITM''' ||HR Radius of Curvature||1.68(+/-0.008)km||0.5% error|| ||AR Radius of Curvature||Flat (>100km) ||As flat as possible|| ||AR Wedge Angle||0.2+/-0.002deg|| || ||Transmission@1064nm||0.004 +0.001/-0.0|| || ||Transmission asymmetry@1064nm|| 2*|(T1-T2)/(T1+T2)| < 0.01||T1 and T2 are the transmission of two ITMs|| ||Reflection Loss@1064nm||<45ppm|| || ||Transmission@532nm||0.2(+/-0.1)||Transmission of ITM must be larger than ETM@532nm|| ||Transmission asymmetry@532nm||No requirement|| || ||Reflection loss@532nm||<1%|| || ||AR Reflectivity@1064nm||200(+100/-0)ppm|| || ||AR Reflectivity@532nm||<5%||As small as possible|| '''ETM''' ||HR Radius of Curvature||1.87(+/-0.009)km||0.5% error|| ||AR Radius of Curvature||Flat (>100km) ||As flat as possible|| ||AR Wedge Angle||0.2+/-0.1deg|| || ||Transmission@1064nm||5ppm < T < 10ppm|| || ||Transmission asymmetry@1064nm|| 2*|(T1-T2)/(T1+T2)| < 0.01||Best Effort|| ||Reflection Loss@1064nm||<45ppm|| || ||Transmission@532nm||0.2(+/-0.01)||Transmission of ETM must be smaller than ITM@532nm|| ||Transmission asymmetry@532nm||No requirement|| || ||Reflection loss@532nm||<1%|| || ||AR Reflectivity@1064nm||200(+100/-0)ppm|| || ||AR Reflectivity@532nm||<5%||As small as possible|| |
Actual Optical Parameters of the Main Interferometer
Contents
Optical Parameters
Interferometer Diagram
g1>0.994, g2=0.571, 16.875MHz, 45MHz
This is the parameter set chosen by the MIF group.
Lengths & Frequencies
f1 |
16.880962MHz (3*f2/8) |
f2 |
45.015898MHz |
f3 |
56.269873MHz (10*f2/8) |
Larm |
3000.0m |
Lmc |
26.639m |
||
Lprc |
66.591m |
Lsrc |
66.591m |
Las |
3.3299m |
Lp1 |
14.7609 |
Lp2 |
12.0667m |
Lp3 |
14.7638m |
Lmi |
25m |
Lmx |
26.6649m |
Lmy |
23.3351m |
Ls1 |
14.7609m |
Ls2 |
12.0667m |
Ls3 |
14.7638m |
Folding angle |
0.6292[deg] |
||||
Folding angle is an incident angle of the beam to the folding mirrors. The angle between incoming and reflected beams is twice the folding angle.
Radius of Curvatures (Positive for concave)
ITM |
>500km |
ETM |
7000.0m |
||
PRM |
332.28m |
PR2 |
-3.269m |
PR3 |
27.38m |
SRM |
332.28m |
SR2 |
-3.269m |
SR3 |
27.38m |
Beam Spot Size (1/e^2 radius)
ITM |
3.43cm |
ETM |
4.53cm |
||
PRM |
4.05mm |
PR2 |
4.06mm |
PR3 |
34.25mm |
SRM |
4.05mm |
SR2 |
4.06mm |
SR3 |
34.25mm |
Lens effect (effective focal length seen from the AR side)
ITM (Sapphire) |
>666km |
PRM (Silica) |
>10000km |
g1=g2=0.586, 11.25MHz, 45MHz
This is an alternative parameter set. Do not use these parameters.
Lengths & Frequencies
f1 |
11.255822MHz |
f2 |
45.023289MHz |
f3 |
39.395378MHz |
Larm |
3000.0m |
Lmc |
26.634m |
||
Lprc |
73.24838m |
Lsrc |
73.24838m |
Las |
3.3293m |
Lp1 |
16.9798m |
Lp2 |
14.2858m |
Lp3 |
16.9828m |
Lmi |
25m |
Lmx |
26.66465m |
Lmy |
23.33535m |
Ls1 |
16.9798m |
Ls2 |
14.2858m |
Ls3 |
16.9828m |
Radius of Curvatures (Positive for concave)
ITM |
7246.3768m |
ETM |
7246.3768m |
||
PRM |
361.552m |
PR2 |
-3.985m |
PR3 |
32.4m |
SRM |
361.552m |
SR2 |
-3.985m |
SR3 |
32.4m |
Beam Spot Size (1/e^2 radius)
PRM |
4.355mm |
PR2 |
4.355mm |
PR3 |
35.77mm |
SRM |
4.355mm |
SR2 |
4.355mm |
SR3 |
35.77mm |
Lens effect (effective focal length seen from the AR side)
ITM (Sapphire) |
-9610m |
PRM (Silica) |
-765.6m |
Mirror Specs
Test Masses
ITM
HR Radius of Curvature |
1.68(+/-0.008)km |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
0.2+/-0.002deg |
|
Transmission@1064nm |
0.004 +0.001/-0.0 |
|
Transmission asymmetry@1064nm |
2*|(T1-T2)/(T1+T2)| < 0.01 |
T1 and T2 are the transmission of two ITMs |
Reflection Loss@1064nm |
<45ppm |
|
Transmission@532nm |
0.2(+/-0.1) |
Transmission of ITM must be larger than ETM@532nm |
Transmission asymmetry@532nm |
No requirement |
|
Reflection loss@532nm |
<1% |
|
AR Reflectivity@1064nm |
200(+100/-0)ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |
ETM
HR Radius of Curvature |
1.87(+/-0.009)km |
0.5% error |
AR Radius of Curvature |
Flat (>100km) |
As flat as possible |
AR Wedge Angle |
0.2+/-0.1deg |
|
Transmission@1064nm |
5ppm < T < 10ppm |
|
Transmission asymmetry@1064nm |
2*|(T1-T2)/(T1+T2)| < 0.01 |
Best Effort |
Reflection Loss@1064nm |
<45ppm |
|
Transmission@532nm |
0.2(+/-0.01) |
Transmission of ETM must be smaller than ITM@532nm |
Transmission asymmetry@532nm |
No requirement |
|
Reflection loss@532nm |
<1% |
|
AR Reflectivity@1064nm |
200(+100/-0)ppm |
|
AR Reflectivity@532nm |
<5% |
As small as possible |