• KAGRA
• Recovery2024
• OMC

OMC Recover

• 2024-4-25
  • OMC stack status

    • PEM injection test in vacuum:https://docs.google.com/presentation/d/1FWitmSKpKBRjvamsFhZ0Xn4r5zCHdozKv5NXbPgomyQ/edit?usp=sharing

    • PEM isolation evaluation after venting: https://klog.icrr.u-tokyo.ac.jp/osl/?r=29310

    • Visual Inspection: https://klog.icrr.u-tokyo.ac.jp/osl/?r=29259

    • Height inspection: https://klog.icrr.u-tokyo.ac.jp/osl/?r=29262

    • Summary by Takahashi-san: https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=15746

      • OMC-OOMT and Optics(Somiya): https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9819

      • Rubbers(Somiya): メクラブッシュ検査成績書.pdf
  • Stack recovery policy :
    • Change all rubbers inside bellows will be replaced by harder rubbers.
    • Change all thick head bolts to thin head bolts
    • Questions
      • The optical table surface height can be set at the same level as before?

        • --> Just adjust the optical table height adjuster bolts?

      • The whole optics will rotate as a whole compared with before?

        • --> It can happen because the previous sit-on situation cannot always be realized again after each stack weight masses can be separated with each other. If so, all optical axis should be adjusted again in the OMC area?
  • Logistic issues
    • Where should be opened?
      • Bellows duct with TMP should be removed for the final adjustment?
        • If so, it needs temporal stocking space as before.
    • Optical table suspension
      • todo list before suspension
        • Cables disconnection
        • OMC stage lock and some covering? FC should be applied on the OMC mirrors?
          • fragile PZT cables
        • OFI removal for keeping I-bolts setting?
        • OMMT1, OSM Mirror, and IM fixing
        • Covering for all with something or put floor KOACHs at both sides?
      • How to suspend the whole optical table
        • Suspended Image by crane(Kimura, Node):ＯＭＣ隙間.pdf
        • Suspending Jig: (木村)中央2Ｆ防振室の前に仮保管されているφ980のアルミ板（t=40）の改造を提案されています。必要な穴開け加工と洗浄を黒部市のカナヤママシナリーに追加工依頼することになるかと。
      • Where and how is it put after taking out the OMC tank?