KAGRA/Subgroups/DET/RUN/MORNINGRUN2019

Summary of the morning run

Time (JST)	Time (GPS)	IFO config	Main channel	klog	state flag
2019/08/27 02:09-09:26	1250874558 - 1250900778	Yarm cavity	(1)	10135
2019/08/28 07:54-09:07	1250981658 - 1250986038	FPMI	(2)	10168
2019/08/29 07:43-08:46	1251067398 - 1251071178	FPMI	(2) (Some bug)	10184
2019/08/30 05:12-08:43	1251144738 - 1251157398	SRMI	(3) (4)(no opt gain and act eff)	10214	K1:GRD-LSC_SRFPMI_LOCK_STATE_N=2000
2019/08/31 06:43-10:00	1251236598 - 1251248418	SRMI	(3) (4)	10238	K1:GRD-LSC_SRFPMI_LOCK_STATE_N=17

Note for beginner

Time
- JST or GPS time
IFO config = Interferometer configuration
- Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
- FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement
Main channel
- We should analyze this channel as h(t) channel
- (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
  - Unit is Hz, because of calculating the IR laser frequency noise
  - Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity.
- (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
  - DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later Fixed(Due to the fail of the filter)
- (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
  - Ogaki-san and cal team sometimes update the optical efficiency and actuator efficiency
- (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
  - First opt gain and act eff measurement 2019/08/30

Summary of the morning run

Time (JST)	Time (GPS)	IFO config	Main channel	klog	Memo
2019/08/27 02:09-09:26	1250874558 - 1250900778	Yarm cavity	K1:CAL-CS_PROC_XARM_FREQUENCY_DQ	10135	Silent run
2019/08/28 07:54-09:07	1250981658 - 1250986038	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ	10168	Silent run
2019/08/29 07:43-08:46	1251067398 - 1251071178	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ (Some bug)	10184	Silent run
2019/08/30 05:12-08:43	1251144738 - 1251157398	SRMI	K1:CAL-CS_PROC_(MICH/SRCL)_DISPLACEMENT_DQ	10214	Silent run

Note for beginner

Time
- JST or GPS time
IFO config = Interferometer configuration
- Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
- FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement
Main channel
- We should analyze this channel as h(t) channel
- (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
  - Unit is Hz, because of calculating the IR laser frequency noise
  - Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity.
- (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
  - DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later Fixed(Due to the fail of the filter)
- (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
  - Ogaki-san and cal team sometimes update the optical gain and actuator efficiency
- (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
  - First optical gain and actuator efficiency by Ogaki-san and Yamat-san 2019/08/30
klog
- Information related to the run is summarized here
Memo
- What is this?
- In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
- We will write following information.
klog
- Information related to the run is summarized here
Memo
- What is this?
- In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
- We will write following information.