• KAGRA
• Subgroups
• DGS
• Projects
• KAGRA
• Installation
• ToolBox

Tool box

Center: field

checked at 2016/9/1

• SANWA multi tester x 1
• Makita drill x 1
  • battery x 1
  • charger x 1
  • + long bit
  • bit set x 1, including torx bit
• monkey wrench x 1
• wrench set: 23x21, 19x17, 17x14, 14x12, 9x8, 7x5?
• pliers (ペンチ) x 1
• long-nose pliers (ラジオペンチ) x 1
• nippper
• cutter (large, カッターナイフ大) x 1
• scissors x 1
• screwdriver 4.5x100mm (マイナスドライバー) x 1
• screwdriver 8 x 150mm (マイナスドライバー) x 1
• Phillips screwdriver (プラスドライバー) PH1 x 1
• Phillips screwdriver (プラスドライバー) PH2 x 1
• Screw driver set (red x 2, green x 2, blue x 2, yellow x 2, extender)
• tape measure x 1
• Black pen x 1
• Red pen x 1
• repeat cable tie 200mm x ~20
• cable tie 292mm x ~80
• Insulating tape (絶縁テープ) 50mm x 1 role
• curing tape (養生テープ) x 1 role
• scotch tape x 1 role
• plastic wire insertion tool for Corrugated tube x 2
• metal wire insertion tool for Corrugated tube x 2
• rack key x 1
• work gloves x 2

Xend

checked at 2016/11/2

• SANWA multi tester x 1
• Makita drill x 1
  • + short bit x 1
  • battery x 1
  • charger x 1
  • bit set x 1, including torx bit
• monkey wrench x 1
• wrench set: 23x21, 19x17, 17x14, 14x12, 9x8, 7x5?
• pliers (ペンチ) x 1
• long-nose pliers (ラジオペンチ) x 1
• bent-nose pliers (ラジオペンチ) x 1
• nippper
• cutter (large, カッターナイフ大) x 1
• scissors x 1
• tape measure x 1
• Safety glasses x 1
• screwdriver 4.5x100mm (マイナスドライバー) x 1
• Phillips screwdriver (プラスドライバー) PH1 x 1
• Phillips screwdriver (プラスドライバー) PH2 x 1
• Screw driver set: red x 2, green x 2, blue x 1(one of the blue was lost.), yellow x 2, extender
• Micro driver set: +1, +0, -1.4, -1.8, -2.3, -3.0
• Hex Wrench set: 1.5, 2, 3, 4, 5, 6, 8, 10
• power adapter from 3pin to 2pin x 2

• Thin & middle black pen x 1

• Thick black pen x 1
• repeat cable tie 200mm x 50
• Name tag (round) 100
• Wire tie x 1n
• Magic tape cable tie x 13
• AA/AI to ADC/DAC screws: 2 x 21
• Rack screw set
• rack key x 1
• work gloves x 3
• TEPRA SR950 x 1
  • Rechargeable AAA battery x 6
• TEPRA tape: Blue 12mm, Orange 18mm, Yellow 6mm

• NiHe battery charger x 1

• Missing things
  • screwdriver 8 x 150mm (マイナスドライバー) x 1
  • Red pen x 1
  • cable tie 292mm x ~80
  • Insulating tape (絶縁テープ) 50mm x 1 role
  • curing tape (養生テープ) x 1 role
  • scotch tape x 1 role
  • plastic wire insertion tool for Corrugated tube x 2
  • metal wire insertion tool for Corrugated tube x 2