Changing host name or IP address for Slave PC

  1. Go to /etc/dhcp on master machine.

  2. Modify the dhcpd.conf file by changing the section you need change like: 

    host k1xxx {
     hardware ethernet xx:xx:xx:xx:xx:xx;
     fixed-address 192.168.10.xxx
    }
  3. Restart the dhcpd server by doing "sudo /etc/init.d/dhcpd restart" on the master machine.
  4. Modify the hosts file for the master in /etc/hosts.
  5. Modify the hosts file for the remote computer on the master machine in /diskless/root/etc/hosts.
  6. Restart the network service by doing "sudo /etc/init.d/eth0 restart" on the master machine.
  7. Rebuild IOP and front-end model.
    • Do not forget changing an old host name to the new host name in .mdl file.
  8. Modify testpoint.par if you need.
  9. Modify /diskless/root/etc/rtsystab if you changed model name.
  10. Reboot slave computer.
  11. Modify the hosts file for workstations in /etc/hosts.
  12. Restart the network service by doing "sudo /etc/init.d/networking restart" on workstations.