How to use
Open the operation screen
1.Login to your workstation.
2.Open sitemap.
3.Open [sitemap]-[PICO] or [New PICO]
4 Press the Picomotor to be operated.
Operation Description
1.Start Script first.
- From [!Script], select [Start]. When the terminal opens, enter your usual password.
- If it starts correctly, numbers and letters will be displayed in the white space.
2.Put the amount of movement in STEP.
3. Press the [FWD] and [REV] buttons to drive the motor.
- Drive in the positive direction with [FWD] and in the negative direction with [REV].
4.[?] Press to update the value of [TOTAL]. If the motor is being driven, the position in the middle will be displayed.
Other operations
[!Power]-[Turn Off],[Turn On],[Reboot]:
- If this indication is present, the Picomotor can be [Turn on], [Turn off], or [Reboot]. If there is no indication, it is not connected to the switch.
- This menu is used when Picomotor hangs and Script does not start. If it does, please press [Reboot] to Start Script again.
[!Log]:
- The text of Picomotor's driving history will be displayed.
- These history files are not editable.
- The [old Pico Log] is the old log. This log contains the history of all the motors and is a very large file.
- [Pico Log] is the log for each Picomotor driver. It is a very small file. Please refer to this log in general.
- [Pico Power Control Log] is a log of the power control of the rebooter. It is used for maintenance.
[!ndscope]:
- Open NDScope.
- This menu may or may not have submenus.
- If there is no submenu, it will show the Picomotor's drive and current position.
- If there is, you can choose to display something else.