Differences between revisions 19 and 20
Revision 19 as of 2018-09-13 14:42:09
Size: 2625
Editor: YoichiAso
Comment:
Revision 20 as of 2018-09-13 14:42:28
Size: 2624
Editor: YoichiAso
Comment:
Deletions are marked like this. Additions are marked like this.
Line 16: Line 16:
 2. Select the No.2 input with the HDMI selector using its remote controller (shown below)<<BR>>{{attachment:DELL_Laptop.jpg||width=200}}  2. Select the No.2 input with the HDMI selector using its remote controller (shown below)<<BR>>{{attachment:HDMIremote.jpg||width=200}}

Remote meeting PC in the Hokubu Kaikn 2F

There is a DELL laptop PC to be used for remote meeting, i.e. Zoom and eZuce, in the 2F conference room of Hokubu Kaikan.

It looks like this:

DELL_Laptop.jpg

Start using the PC

The PC is always powered on (don't shut it down !). So you do not have to touch it. Here is the typical procedure to start using the PC.

  1. Turn on the projector using the remote controller.
  2. Select the No.2 input with the HDMI selector using its remote controller (shown below)
    HDMIremote.jpg

  3. Wait a while until the PC screen shows up.
  4. Turn on the wireless mouse and the keyboard (shown below).
    KeyboardMouse.jpg

After the meeting

Sound setup

There is a wireless microphone shown below:

eMeet.jpg

It may be connected to the PC with a USB cable for charging. If so, disconnect it first. Then turn it on by long-pressing the power button. You can move it anywhere in the room so that the microphone can be close to the current speaker. Make sure that you turn it off after use. It is better to connect it back to the PC after use for charging the battery.

Even though this microphone has a built in speaker, the sound output from the PC is routed to the speaker on the projector through HDMI.

Video

There is a web camera mounted on the silver rack next to the podium. By turning the lens, you can manually adjust the focus of the camera.

WebCamera.jpg

Launching remote meeting software

This PC has Zoom and eZuce installed and set up. There are icons to start Zoom and eZuce. You only need to double click them to start meetings.

ScreenShot.PNG

After the meeting

  1. Turn off the projector using the remote controller.
  2. Turn off the wireless mouse and the keyboard (this is very important, otherwise the battery will be empty).
  3. Turn off the wireless microphone and connect it to the white micro-USB cable coming from the PC for charging.
  4. Do not shut down the laptop PC.

Using Polycom

There is an HDMI selector in the silver rack. However, this selector blocks the transmission of audio signal. Therefore, the PC is connected to the HDMI cable directly coming out of the wall outlet, not going through the selector. If you want to use the Polycom instead of the DELL laptop, you need to unplug the HDMI cable from the PC and hook it up to the back of Polycom.

Hokubu2FConfRoom (last edited 2018-09-14 11:23:51 by YoichiAso)