• Collaboration Shift Schedule

Edit conflict - other version:

• Operator Shift

Edit conflict - your version:

End of edit conflict

• When FPMI cannot keep lock state for over 10 minutes or cannot got to lock state ---> call operation shift members (contact person TBD).

• Collaboration shift routine tasks

• Contents

  1. Control Room Overview
  2. How to use Guardian
  3. Check list of the interferometer

Control Room Overview

• IFO Monitor: shows the status of the Main Interferometer

• 

• CCD Monitor:

• 

• DAQ/VIS status:

• 

• PEM Monitor: Room temperature/ Vacuum pressure

• 

• Time: show JST/UTC/GPS time

• 

How to use Guardian

Accessing to the guardian screen

• In the desktop, you can click on the sitemap.

• 

• In the sitemap, you can click on the link for the guardian overview screen.

• 

• Meaning of the background color

• 

Knowing the current state and requested state

How to request a state

• Click on the gray bar in the middle.
  
  Then, choose the desired state.
  

Check list of the interferometer

Check if the LSC_LOCK Guardian at OBSERVATION state

Check if all of VIS Guardians are in ALIGNED state

Look at Guardian Overview

OR you can see the VIS status on the Monitor

• 

• If the Guardian is in TRIPPED state, you should reset Watch Dogs (WDs), OR call operation shift members (contact person TBD).

Check the IO Guardian

IO Guardian should in PROVIDING_STABLE_LIGHT state, if not call operation shift members ASAP!!!(contact person TBD).

Check the Green Laser status

• see if the shutter is on or not

• see if K1: ALS-X (Y)_ARM_INPUT_OUT is more than 0.7

• Check if ALS_PLLX/ALS_PLLY Guardian is on PLL_LOCK state