Differences between revisions 93 and 139 (spanning 46 versions)

For collaborator shifts

Collaboration Shift Schedule
Operator shift table in JGW-M1910914
Some information for collaborator shifts in JGW-M1809380

Collaboration shift routine tasks

When FPMI cannot keep locked state for over 10 minutes or cannot got to lock state
- ---> call operator shift members
  - contact person (operator shift) on the day is listed with PHONE NUMBER around white board in the control room or see the link JGW-M1910914 (no phone number in this list)
Write "Log book" (JGW-E1911124) on the desk in the control room.
- Check Guardian status for 5 items, LSC, VIS, IO, Green laser and ALS. Instruction is in below.
- Put check mark every 2 hours.
- Write down everything you noticed.
  - Example: lock lost, earthquake, somebody entered mine etc.
Please write klog: http://klog.icrr.u-tokyo.ac.jp/osl/ before you leave control room.
- Writing klog is very important. This is only one tool which can show the status in the control room to outside.
- Account name and password are shown on the white board in the control room.
Leave message on "Takeover note" (JGW-T1605032) on the desk in the control room if you have something to tell to the next shift.
Improve this wiki page if you had something you did not understand well and you found what it is.
1. Search "KAGRA wiki" in google and access to KAGRA top page.
2. Go to ERun top page on the second line of KAGRA Top page, and go to "Collaborator shift manuals". That page is this manual.
3. Login KAGRA wiki, and press "Edit" button around the top left.
  - Account name and password are shown on the white board in the control room.

1. Interferometer locking status screen

Please check the interferometer locking screen at the front monitor in the control room first. If the status is not "LOCKED", something might happen.
If PRFPMI cannot keep "LOCKED" state for over 10 minutes or cannot got back to "LOCKED" state, please contact operator shift.
If it is LOCKED, please take notes IMC output power, BNS range, beam status.
comment from a shift taker Note that "LOCKED" and "OBSERVING" are different. The above check should be replaced with "OBSERVING" status.

2. Check list of the interferometer

How to access to the guardian screen

On the desktop, you can click the sitemap icon.
In the sitemap, you can click on the link for the guardian overview screen.

2-1. Check if the LSC_LOCK Guardian at OBSERVATION state

Please check the "LSC_LOCK" is in "OBSERVATION" mode. If not, please contact operator shift.(Please put a red box for LSC_LOCK)

2-2. Check if all of VIS Guardians are at ALIGNED state

Look at Guardian Overview

OR you can see the VIS status on the Monitor

If the Guardian is at TRIPPED state, you should reset Watch Dogs (WDs)(Content of this document should be replaced with new one), OR call operation shift members (contact person TBD).

2-3. Check the IO Guardian

IO guardian.png

IO Guardian should at PROVIDING_STABLE_LIGHT state, if not call operation shift members ASAP!!!(contact person TBD).

2-4. Check the Green Laser status

See if the shutter is on or not. If the background color is green, the shutter is ok/open (red means the shutter is closed).

see if K1: ALS-X (Y)_ARM_INPUT_OUT is more than 0.7

0.7.png

2-5. Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state

Control Room Overview

IFO Monitor: shows the status of the Main Interferometer
The following control room image should be changed with new one.
CCD Monitor:
DAQ/VIS status:
PEM Monitor: Room temperature/ Vacuum pressure
Time: show JST/UTC/GPS time

KAGRA/EngineeringRun/ER191217_24/Shift (last edited 2020-04-07 12:03:16 by OsamuMiyakawa)

-  ⇤ ← Revision 93 as of 2019-12-17 10:50:07 → 
  Size: 4405
  Editor: OsamuMiyakawa
  Comment:
+   ← Revision 139 as of 2020-04-07 12:03:16 → ⇥
  Size: 5321
  Editor: OsamuMiyakawa
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
-----
+------
-Line 10:
+Line 11:
-. Write "Log book" on the desk in the control room.
+. When FPMI cannot keep locked state for over 10 minutes or cannot got to lock state
  ---> call operator shift members
   * contact person (operator shift) on the day is listed with '''PHONE NUMBER''' around white board in the control room or see the link [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=10914|JGW-M1910914]] (no phone number in this list)

 * Write "Log book" ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11124|JGW-E1911124]]) on the desk in the control room.
  * Check Guardian status for 5 items, LSC, VIS, IO, Green laser and ALS. Instruction is in below.
-Line 14:
+Line 20:
- * When FPMI cannot keep lock state for over 10 minutes or cannot got to lock state
  ---> call operation shift members
   * contact person on the day is listed with '''PHONE NUMBER''' around white board in the control room or see the link [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=10914|JGW-M1910914]] (no phone number in this list)
 * Improve this wiki page if you have something you do now understand well.
  * Account name and password are shown on the white board in the control room. Login KAGRA wiki, access to this page and press "Edit" button on the top left.
 * Write down "Takeover note" on the desk in the control room.
  * If you have something which should be known to the next shift, please leave messages in the notebook.
-Line 23:
+Line 22:
+  * Account name and password are shown on the white board in the control room. 
 * Leave message on "Takeover note" ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=5032|JGW-T1605032]]) on the desk in the control room if you have something to tell to the next shift.
 * Improve this wiki page if you had something you did not understand well and you found what it is.
  1. Search "KAGRA wiki" in google and access to KAGRA top page.
  * Go to ERun top page on the second line of KAGRA Top page, and go to "Collaborator shift manuals". That page is this manual.
  * Login KAGRA wiki, and press "Edit" button around the top left.
   * Account name and password are shown on the white board in the control room.
-Line 25:
+Line 31:
+------
-Line 27:
+Line 33:
-== Control Room Overview ==
 * IFO Monitor: shows the status of the Main Interferometer
 . {{attachment:IFO1.png||width="630"}} 
 * CCD Monitor: 
 . {{attachment:CCD.jpg||height="881"}}
 * DAQ/VIS status: 
 . {{attachment:vis status.png||height="681"}}
 * PEM Monitor: Room temperature/ Vacuum pressure
 . {{attachment:Pem.jpg||width="630"}}
 * Time: show JST/UTC/GPS time
 . {{attachment:GPS t ime.jpg||width="430"}}
+== 1. Interferometer locking status screen ==
 * Please check the interferometer locking screen at the front monitor in the control room first. If the status is not "LOCKED", something might happen.
 * If PRFPMI cannot keep "LOCKED" state for over 10 minutes or cannot got back to "LOCKED" state, please contact operator shift.
 * If it is '''LOCKED''', please take notes IMC output power, BNS range, beam status.

 * '''comment from a shift taker''' Note that "LOCKED" and "OBSERVING" are different.  The above check should be replaced with "OBSERVING" status. 

 {{attachment:2020-02-27 4.58.16.png||width="800"}}


------
== 2. Check list of the interferometer ==

=== How to access to the guardian screen ===
 *On the desktop, you can click the ''sitemap'' icon.

 {{attachment:112.png||width="700"}}

 *In the sitemap, you can click on the link for the guardian overview screen.
 {{attachment:116.png||width="800"}}
-Line 41:
+Line 56:
-= How to check Guardian =
[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Commissioning/Phase1/Operation/ShiftManual#How_to_reset_Watch_Dogs|how to use Guardian]]
=== Accessing to the guardian screen ===
 . On the desktop, you can click the sitemap.
+=== 2-1. Check if the LSC_LOCK Guardian at OBSERVATION state ===
-Line 46:
+Line 58:
- . {{attachment:112.png||width="630"}}
 . In the sitemap, you can click on the link for the guardian overview screen.
 . {{attachment:116.png||width="730"}}
 . Meaning of the background color
 . {{attachment:guardian_explanation.png||width=""}}
=== Knowing the current state and requested state ===
 . {{attachment:guardian_howto4.png||height="281",width="434"}}
+ * Please check the "LSC_LOCK" is in "OBSERVATION" mode. If not, please contact operator shift.('''Please put a red box for LSC_LOCK''')
 {{attachment:116.png||width="800"}}
-Line 54:
+Line 61:
-=== How to request a state ===
 . Click on the gray bar in the middle.<<BR>> {{attachment:guardian_howto.png||height="298",width="433"}} <<BR>> Then, choose the desired state.<<BR>> {{attachment:guardian_howto2.png||height="299",width="434"}}
-Line 57:
+Line 62:
-= Check list of the interferometer =
=== Check if the LSC_LOCK Guardian at OBSERVATION state ===
{{attachment:LCSLOCK.png||height="",width="880"}} 

=== Check if all of VIS Guardians are at ALIGNED state ===
+=== 2-2. Check if all of VIS Guardians are at ALIGNED state ===
-Line 63:
+Line 64:
- {{attachment:VIS guardian.png||height="",width="880"}}
+ {{attachment:VIS guardian.png||height="",width="700"}}
-Line 66:
+Line 67:
- {{attachment:VIS guardian 2.png||height="",width="680"}} 
 * If the Guardian is at TRIPPED state, you should [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Commissioning/Phase1/Operation/ShiftManual#How_to_reset_Watch_Dogs|reset Watch Dogs (WDs)]], OR call operation shift members (contact person TBD).
+ {{attachment:VIS guardian 2.png||height="",width="600"}} 
 * If the Guardian is at TRIPPED state, you should [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Commissioning/Phase1/Operation/ShiftManual#How_to_reset_Watch_Dogs|reset Watch Dogs (WDs)]]('''Content of this document should be replaced with new one'''), OR call operation shift members (contact person TBD).
-Line 69:
+Line 70:
-=== Check the IO Guardian ===
{{attachment:IO guardian.png||height="",width="680"}}
+=== 2-3. Check the IO Guardian ===
{{attachment:IO guardian.png||height="",width="800"}}
-Line 74:
+Line 75:
-=== Check the Green Laser status ===
+=== 2-4. Check the Green Laser status ===
-Line 77:
+Line 78:
-{{attachment:shutter.png||height="",width="680"}}
+{{attachment:shutter.png||height="",width="800"}}
-Line 84:
+Line 85:
- * Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state
+=== 2-5. Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state ===
-Line 87:
+Line 88:
+------
== Control Room Overview ==
 * IFO Monitor: shows the status of the Main Interferometer
 * '''The following control room image should be changed with new one.'''
 . {{attachment:IFO1.png||width="800"}} 


 * CCD Monitor: 
 . {{attachment:CCD.jpg||height="1000"}}


 * DAQ/VIS status: 
 . {{attachment:vis status.png||height="800"}}


 * PEM Monitor: Room temperature/ Vacuum pressure
 . {{attachment:Pem.jpg||width="800"}}


 * Time: show JST/UTC/GPS time
 . {{attachment:GPS t ime.jpg||width="800"}}