Differences between revisions 22 and 51 (spanning 29 versions)

For collaborator shifts

Collaboration Shift Schedule
Operator shift table in JGW-M1910914
Some information for collaborator shifts in JGW-M1809380

Emergency Contact
Phone number for Incidents/Accidents	0578-85-2600 / +81-578-85-2600 Ohashi 080-6796-3086 Takayama080-5432-2331 Saito 080-6796-3208 Uchiyama 090-7829-4950
Contact at the time of missed ride	Control Room phone number0578-85-2624 mail address : all-hida@icrr.u-tokyo.ac.jp
TAXI Emergency Contact phone number	0578-85-2600 / +81-578-85-2600 Uchiyama 090-7829-4950 Miyakawa 080-6796-3238 Takayama 080-5432-2331
For evening shifters If the night shift don't show up when taxi arrive, please contact operator shift of the day. After that you may go back to Locomotion by the taxi.

Collaboration shift routine tasks

When FPMI cannot keep locked state for over 10 minutes or cannot get to lock state
- ---> call operator shift members
  - contact person (operator shift) on the day is listed with PHONE NUMBER around white board in the control room or see the link JGW-M1910914 (no phone number in this list)
Write "Log book" (JGW-E1911124) on the desk in the control room.
- Check Guardian status for 5 items, LSC, VIS, IO, Green laser and ALS. Instruction is in below.
- Put check mark every 2 hours.
- Write down everything you noticed.
  - Example: lock lost, earthquake, somebody entered mine etc.
- Leave message on "Takeover Note of KAGRA Observation Shift (if any)" on the Log if you have something to tell to the next shift.
Please write klog: http://klog.icrr.u-tokyo.ac.jp/osl/ before you leave control room.
- Writing klog is very important. This is only one tool which can show the status in the control room to outside.
- Account name and password are shown on the white board in the control room.
Improve this wiki page if you had something you did not understand well and you found what it is.
1. Search "KAGRA wiki" in google and access to KAGRA top page.
2. Search "Engineering Run" on KAGRA Top page and select "ER200220-25" to access. And then go to "Collaborator shift manuals". That page is this manual.
3. Login KAGRA wiki, and press "Edit" button around the top left.
  - Account name and password are shown on the white board in the control room.

1. Interferometer locking status screen

Please check the interferometer locking screen at the front monitor in the control room first. If the status is not "LOCKED" (after "LOCKED," it may continue to "OBSERVING"), something might happen.
If PRFPMI cannot keep "LOCKED" state for over 10 minutes or cannot get back to "LOCKED" state, please contact operator shift.
If it is LOCKED, please take notes IMC output power, BNS range, beam status.

2. Check list of the interferometer

How to access to the guardian screen

On the desktop, you can click the sitemap icon.
In the sitemap, you can click on the link for the guardian overview screen.

2-1. Check if the LSC_LOCK Guardian at OBSERVATION state

Please check the "LSC_LOCK" is in "OBSERVATION" mode. If not, please contact operator shift.

2-2. Check if all of VIS Guardians are NOT at TRIPPED state (The screenshot is old.)

Look at the lower right corner of Guardian Overview
OR you can see the VIS status on the Monitor
- If the Guardian is at TRIPPED state, you should reset Watch Dogs (WDs) (Content of this document should be replaced with new one. If it is already down, please delete this message.), OR call operation shift members (contact person TBD).

2-3. Check the IO Guardian

IO guardian.png

IO Guardian should at PROVIDING_STABLE_LIGHT state, if not call operation shift members ASAP!!! (contact person TBD).

2-4. Check the Green Laser status

See if the shutter is on or not. If the background color of each box is green, the shutter is ok/open (red means the shutter is closed).

see if K1: ALS-X (Y)_ARM_INPUT_OUT is more than 0.7.
1) Launch "dataviewer" on the desktop. (Just in case you cannot find the chart.)
2) In "Signal" tab, select "K1:ALS-X(Y)_ARM_INPUT_OUT" by double click.
3) In "Realtime" tab, select the number ID (e.g. 1 & 2) of the signals to display and click "Start" (Resolution=1024).

0.7.png

2-5. Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state

2-6. Check Data Transfer Status

This web page is displayed in the control room, the display near by the entrance of computer room. (URL is https://www.icrr.u-tokyo.ac.jp/~stsuchid/dmgmon/ )

1) All "Status of Data Transfer" have to be indicated with green color.
2) All "Status of Low Latency Data Transfer from LVK" have to be indicated with green colors and ":OK".

If error/caution/alert will be displayed and will not improve 5 minute, please send Email to DMG expert. You can found Email address of DMG expert in the control room.

Control Room Overview

IFO Monitor: shows the status of the Main Interferometer
The following control room image should be changed with new one.
CCD Monitor:
DAQ/VIS status:
PEM Monitor: Room temperature/ Vacuum pressure
Time: show JST/UTC/GPS time

KAGRA/EngineeringRun/ER200220_25/Shift (last edited 2020-04-07 12:02:41 by OsamuMiyakawa)

-  ⇤ ← Revision 22 as of 2020-02-20 18:33:06 → 
  Size: 5909
  Editor: shift
  Comment:
+   ← Revision 51 as of 2020-02-29 21:05:16 → ⇥
  Size: 7060
  Editor: shift
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
- * [[https://docs.google.com/spreadsheets/d/1IhqVGf5oV_XFK8-R-qqeSbq194mUHLwtheNUbT7fH-8/edit#gid=1409371168 |Collaboration Shift Schedule]]
+ * [[https://docs.google.com/spreadsheets/d/1IhqVGf5oV_XFK8-R-qqeSbq194mUHLwtheNUbT7fH-8/edit#gid=1409371168|Collaboration Shift Schedule]]
-Line 7:
+Line 6:
+||||<style="text-align:center">'''Emergency Contact''' ||
||Phone number for Incidents/Accidents ||'''0578-85-2600 / +81-578-85-2600''' Ohashi 080-6796-3086 Takayama080-5432-2331 Saito 080-6796-3208 Uchiyama 090-7829-4950 ||
||Contact at the time of missed ride ||Control Room phone number0578-85-2624  mail address : all-hida@icrr.u-tokyo.ac.jp ||
||TAXI Emergency Contact phone number ||0578-85-2600 / +81-578-85-2600 Uchiyama 090-7829-4950 Miyakawa 080-6796-3238 Takayama 080-5432-2331 ||
||||||<style="text-align:left">For evening shifters If the night shift don't show up when taxi arrive, please contact operator shift of the day. After that you may go back to Locomotion by the taxi. ||
-Line 8:
+Line 12:
-||||<style="text-align:center">'''Emergency Contact'''||
||Phone number for Incidents/Accidents||'''0578-85-2600 / +81-578-85-2600''' Ohashi 080-6796-3086 Takayama080-5432-2331 Saito 080-6796-3208 Uchiyama 090-7829-4950||
||Contact at the time of missed ride ||Control Room phone number0578-85-2624  mail address : all-hida@icrr.u-tokyo.ac.jp||
||TAXI Emergency Contact phone number||0578-85-2600 / +81-578-85-2600 Uchiyama 090-7829-4950 Miyakawa 080-6796-3238 Takayama 080-5432-2331||
||||||<style="text-align:left">For evening shifters If the night shift don't show up when taxi arrive, please contact operator shift of the day. After that you may go back to Locomotion by the taxi. ||
 Line 15:
-. When FPMI cannot keep locked state for over 10 minutes or cannot got to lock state
  ---> call operator shift members
+. When FPMI cannot keep locked state for over 10 minutes or cannot get to lock state
  . ---> call operator shift members
-Line 20:
+Line 19:
- * Write "Log book" ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11124|JGW-E1911124]]) on the desk in the control room.
+. Write "Log book" ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11124|JGW-E1911124]]) on the desk in the control room.
-Line 25:
+Line 24:
-  * Leave message on "Takeover Note of KAGRA Observation Shift (if any)" on form for each shift in "Log book" if you have something to tell to the next shift.
 * Please write [[http://klog.icrr.u-tokyo.ac.jp/osl/|klog]]: [[http://klog.icrr.u-tokyo.ac.jp/osl/]] before you leave control room.
+  * Leave message on "Takeover Note of KAGRA Observation Shift (if any)" on the Log if you have something to tell to the next shift.
 1. Please write [[http://klog.icrr.u-tokyo.ac.jp/osl/|klog]]: http://klog.icrr.u-tokyo.ac.jp/osl/ before you leave control room.
-Line 28:
+Line 27:
-  * Account name and password are shown on the white board in the control room. 
 * Improve this wiki page if you had something you did not understand well and you found what it is.
+  * Account name and password are shown on the white board in the control room.
 1. Improve this wiki page if you had something you did not understand well and you found what it is.
-Line 31:
+Line 30:
-  * Search "Engineering Run" on KAGRA Top page and select "ER200220-25" to access. And then go to "Collaborator shift manuals". That page is this manual.
  * Login KAGRA wiki, and press "Edit" button around the top left.
+. Search "Engineering Run" on KAGRA Top page and select "ER200220-25" to access. And then go to "Collaborator shift manuals". That page is this manual.
  1. Login KAGRA wiki, and press "Edit" button around the top left.
-Line 39:
+Line 38:
- * Please check the interferometer locking screen at the front monitor in the control room first. If the status is not "LOCKED", something might happen.
 * If PRFPMI cannot keep "LOCKED" state for over 10 minutes or cannot got back to "LOCKED" state, please contact operator shift.
+ * Please check the interferometer locking screen at the front monitor in the control room first. If the status is not "LOCKED" (after "LOCKED," it may continue to "OBSERVING"), something might happen.
 * If PRFPMI cannot keep "LOCKED" state for over 10 minutes or cannot get back to "LOCKED" state, please contact operator shift.
-Line 42:
+Line 41:
- {{attachment:IFOstatus_s_v3.1_new.JPG||width="800"}}
+ . {{attachment:IFOstatus_s_v3.1_new_2.JPG||width="800"}}
-Line 48:
+Line 45:
+=== How to access to the guardian screen ===
 * On the desktop, you can click the ''sitemap'' icon.
 . {{attachment:112.png||width="700"}}
 Line 49:
-=== How to access to the guardian screen ===
 *On the desktop, you can click the ''sitemap'' icon.

 {{attachment:112.png||width="700"}}

 *In the sitemap, you can click on the link for the guardian overview screen.
+ * In the sitemap, you can click on the link for the guardian overview screen.
-Line 57:
+Line 52:
-Line 60:
+Line 53:
-Line 64:
+Line 56:
+=== 2-2. Check if all of VIS Guardians are NOT at TRIPPED state (The screenshot is old.) ===
 * Look at the lower right corner of Guardian Overview
 {{attachment:VIS guardian.png|VIS guardian.png|width="700",height=""}}
-Line 65:
+Line 60:
-=== 2-2. Check if all of VIS Guardians are at ALIGNED state ===
Look at Guardian Overview ("VIS_SRM" is "MISALIGNED" without taking data.)
 {{attachment:VIS guardian.png||height="",width="700"}} 
 
OR you can see the VIS status on the Monitor
 {{attachment:VIS guardian 2.png||height="",width="600"}} 
 * If the Guardian is at TRIPPED state, you should [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Commissioning/Phase1/Operation/ShiftManual#How_to_reset_Watch_Dogs|reset Watch Dogs (WDs)]] ('''Content of this document should be replaced with new one'''), OR call operation shift members (contact person TBD).
+ * OR you can see the VIS status on the Monitor
 {{attachment:VIS guardian 2.png|VIS guardian 2.png|width="600",height=""}}
  * If the Guardian is at TRIPPED state, you should [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Commissioning/Phase1/Operation/ShiftManual#How_to_reset_Watch_Dogs|reset Watch Dogs (WDs)]] ('''Content of this document should be replaced with new one. If it is already down, please delete this message.'''), OR call operation shift members (contact person TBD).
-Line 74:
+Line 65:
-{{attachment:IO guardian.png||height="",width="800"}}
+{{attachment:IO guardian.png|IO guardian.png|width="800",height=""}}
-Line 76:
+Line 67:
-IO Guardian should at PROVIDING_STABLE_LIGHT state, if not call operation shift members '''ASAP!!!'''(contact person TBD).
+IO Guardian should at PROVIDING_STABLE_LIGHT state, if not call operation shift members '''ASAP!!!''' (contact person TBD).
-Line 79:
+Line 70:
- * See if the shutter is on or not. If the background color is green, the shutter is ok/open (red means the shutter is closed).
+ * See if the shutter is on or not. If the background color of each box is green, the shutter is ok/open (red means the shutter is closed).
-Line 81:
+Line 72:
-{{attachment:shutter.png||height="",width="800"}}
+{{attachment:shutter.png||width="800",height=""}}

 * see if ''K1: ALS-X (Y)_ARM_INPUT_OUT'' is more than 0.7.

 . 1) Launch "dataviewer" on the desktop. (Just in case you cannot find the chart.)
 . 2) In "Signal" tab, select "K1:ALS-X(Y)_ARM_INPUT_OUT" by double click.
 . 3) In "Realtime" tab, select the number ID (e.g. 1 & 2) of the signals to display and click "Start" (Resolution=1024).

{{attachment:dataviewer_singal.png||width="680",height=""}}
{{attachment:dataviewer_realtime.png||width="680",height=""}}
{{attachment:0.7.png||width="680",height=""}}

=== 2-5. Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state ===
{{attachment:PLLXY1.png||width="880",height=""}}
-Line 84:
+Line 88:
- * see if K1: ALS-X (Y)_ARM_INPUT_OUT is more than 0.7 (need to check the bottom of the panel!!!)
+=== 2-6. Check Data Transfer Status ===
{{attachment:DMGoperation_20200228.jpg||width="880",height=""}}
-Line 86:
+Line 91:
-{{attachment:0.7.png||height="",width="680"}}
+This web page is displayed in the control room, the display near by the entrance of computer room.
(URL is https://www.icrr.u-tokyo.ac.jp/~stsuchid/dmgmon/ )
-Line 88:
+Line 94:
-=== 2-5. Check if ALS_PLLX/ALS_PLLY Guardian is at PLL_LOCK state ===
+ . 1) All "Status of Data Transfer" have to be indicated with green color.
 . 2) All "Status of Low Latency Data Transfer from LVK" have to be indicated with green colors and ":OK".
-Line 90:
+Line 97:
-{{attachment:PLLXY1.png||height="",width="880"}}
+If error/caution/alert will be displayed and will not improve 5 minute, please send Email to DMG expert.
You can found Email address of DMG expert in the control room.
-Line 97:
+Line 104:
  . {{attachment:IFO1.png||width="800"}}
-Line 99:
+Line 106:
- * CCD Monitor:
+ * CCD Monitor:
-Line 103:
+Line 109:
- * DAQ/VIS status: 
 . {{attachment:vis status.png||height="800"}}
+ * DAQ/VIS status:
 . {{attachment:vis status.png|vis status.png|height="800"}}
-Line 111:
+Line 115:
-Line 113:
+Line 116:
- . {{attachment:GPS t ime.jpg||width="800"}}
+ . {{attachment:GPS t ime.jpg|GPS t ime.jpg|width="800"}}