Differences between revisions 1 and 10 (spanning 9 versions)
Revision 1 as of 2016-02-02 10:43:51
Size: 83
Comment:
Revision 10 as of 2016-02-21 14:04:19
Size: 620
Editor: NaokoOhishi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
=== Check list === === Mode Cleaner Suspensions ===
Each MC suspension has 4 coils and 2 pico-motors (pitch, yaw).
Line 3: Line 4:
 * === ETM ===
Line 5: Line 6:
=== In the case of IFO failure or emergency === Each iKAGRA ETM suspension has 4 coils and 4 pico-motors (pitch:1-6, yaw:2-7, z:3-8, y:4-9) connected.
Line 7: Line 8:
 * If the coil-magnet actuator seems to have a problem, please check 2 things.

1. Coil drivers in particular for Y-end had a loose connection with power line (-18V, -15V).

Please check the LED on coil driver. If the LED is out, try to fasten the power line.

2. Sometimes watchdog? system stop the output current from the coil driver in order to
protect mechanical system.

=== PR3 ===

Mode Cleaner Suspensions

Each MC suspension has 4 coils and 2 pico-motors (pitch, yaw).

ETM

Each iKAGRA ETM suspension has 4 coils and 4 pico-motors (pitch:1-6, yaw:2-7, z:3-8, y:4-9) connected.

If the coil-magnet actuator seems to have a problem, please check 2 things.

1. Coil drivers in particular for Y-end had a loose connection with power line (-18V, -15V).

Please check the LED on coil driver. If the LED is out, try to fasten the power line.

2. Sometimes watchdog? system stop the output current from the coil driver in order to protect mechanical system.

PR3

KAGRA/Observation/iKAGRA/Manual/VIS (last edited 2016-03-24 17:13:06 by AyakaShoda)