Differences between revisions 2 and 12 (spanning 10 versions)
Revision 2 as of 2016-02-02 10:54:29
Size: 93
Comment:
Revision 12 as of 2016-02-26 19:58:54
Size: 607
Editor: NaokoOhishi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
=== Check list === === Mode Cleaner Suspensions ===
Each MC suspension has 4 coils and 2 pico-motors (pitch, yaw).
Line 3: Line 4:
 * === ETM ===
Line 5: Line 6:
=== In the case of IFO/subsystem failure or emergency === Each iKAGRA ETM suspension has 4 coils and 4 pico-motors (pitch:1-6, yaw:2-7, z:3-8, y:4-9).
Line 7: Line 8:
 * If you find a problem about coil-magnet actuator, please check 2 things.

1. Coil drivers in particular for Y-end had a loose connection with power line (-18V, -15V).

Please check the LED on coil driver. If the LED is out, try to fasten the power line.

2. Sometimes watchdog? system stop the output current from the coil driver in order to
protect mechanical system.

=== PR3 ===

Mode Cleaner Suspensions

Each MC suspension has 4 coils and 2 pico-motors (pitch, yaw).

ETM

Each iKAGRA ETM suspension has 4 coils and 4 pico-motors (pitch:1-6, yaw:2-7, z:3-8, y:4-9).

If you find a problem about coil-magnet actuator, please check 2 things.

1. Coil drivers in particular for Y-end had a loose connection with power line (-18V, -15V).

Please check the LED on coil driver. If the LED is out, try to fasten the power line.

2. Sometimes watchdog? system stop the output current from the coil driver in order to protect mechanical system.

PR3

KAGRA/Observation/iKAGRA/Manual/VIS (last edited 2016-03-24 17:13:06 by AyakaShoda)