• KAGRA
• Recovery2024
• EYC

EYC Recovery(20240407)

• Suspension health check (Takahashi, Ushiba)
  • A01: Cable check
  • A02 Porality Check
  • A03 Rubbing Check
  • A04: Range and Calibration
  • A05: Watchdog Setting: Skip
  • A06: Height Measurement

  • A08: Calibration:skip

  • A09: Spectrum(spectra of IM/MN photosensors.)
  • A10: Transfer Function
• Oplev Check (Yokozawa, Akutsu)
• Green flash at REFL and Trans PD
• Y-Pcal homeworks
• Windows Cleaning

• Tcam (Yokozawa and ChenDan, and Yamamoto)
• TMSY optical system (Akutsu and his selected persons)
• Baffle PDs (Yokozawa and his selected persons):
• NAB, WAB (Akutsu)
• Vacuum system (Kimura-san / Uchiyama-kun and their selected persons)
  • tie rod adjustment between EXC and TMSX to avoid stress when the only EXC side is pumped down.
  • Nasty air parts were replaced.
  • Vacuum alert recovery after pumping down.
  • GV interlock will be tried after pumping down.
  • The broken cc-10 was replaced.
  • N2 purge is necessary for EXV.
• Cryo-system (Kimura-san and his selected persons)
  • All temp signals are obtained?
  • Connector change is required for the heat link suspensions.
  • Cryocon alert to slack after cooling.
  • No interlock for TMP around the Cryostat.