IXC Recovery(20240409)
- Suspension health check (Takahashi, Ushiba)
- A01: Cable check
- Remeasure the adjusted cables.
Recovery of BF damper: https://klog.icrr.u-tokyo.ac.jp/osl/?r=28613, https://klog.icrr.u-tokyo.ac.jp/osl/?r=28541, https://klog.icrr.u-tokyo.ac.jp/osl/?r=28862
- A02 Porality Check
-> Judge in TF measurement
- A03 Rubbing Check
-> Judge in TF measurement
- A04: Range and Calibration
- A05: Watchdog Setting: Skip
- A06: Height Measurement
A08: Calibration:skip
- A09: Spectrum
ITMX tower sensor: https://klog.icrr.u-tokyo.ac.jp/osl/?r=29122,
IM/MN photosensors: https://klog.icrr.u-tokyo.ac.jp/osl/?r=29121,
- A10: Transfer Function
- A01: Cable check
- Oplev Check (Yokozawa, Akutsu)
- TM: check between closing SI.
- Windows Cleaning
Tcam (Yokozawa and ChenDan, and Yamamoto)
- Green flash at REFL and Trans PD
- Baffle PDs (Yokozawa and his selected persons):
- not necessary
- one photodetector was dead.
- NAB, WAB (Akutsu)
- Vacuum system (Kimura-san / Uchiyama-kun and their selected persons)
- Nasty air parts were replaced.
- Vacuum alert recovery after pumping down.
- GV interlock will be tried after pumping down.
- N2 purge is necessary for IXV.
- Cryo-system (Kimura-san and his selected persons)
- All temp signals are obtained?
- Cryocon alert to slack after cooling.
- No interlock for TMP around the Cryostat.