20190205

Optics name

Type of the optics

The holder

Note

1st steering mirror -> STM3

Newly opened "CVI HM-2037-45"

Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG

I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205

Harmonic BS -> HBS

HBSY21

Polaris-K2S1 + washed imo M6 screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-40100

2nd steering mirror -> GST0

Newly opened "TFMQSP-50.8C10-20-532/1064-0/26D"

Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG

I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205

Collimation lens for green (3rd BRT lens for green) -> BRT3

SLB-50.8-200NM

VLHG-50.8 + washed M6 imo screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-2460

VBSP-2460 should be replaced to VBSP-40100 later.