Size: 2062
Comment:
|
Size: 10122
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
= Prepare h(t) reconstruction review = LIGO time-domain calibration review wiki: https://wiki.ligo.org/Calibration/TDCalibReview = Calibration State Vector (K1:DCS-CALIB_STATE_VECTOR_C10) = (Under preparation. It's planned to be used in O3b) ||<tablewidth="786px">'''bit<<BR>>''' ||'''Identifier<<BR>>''' ||'''Description<<BR>>''' || ||0 ||`HOFT_OK` ||$h(t)$ was successfully computed (logical AND of bits ...) || ||1 ||`OBS_INTENT` ||The observation intent'' is set by the operator '' || ||2 ||`OBS_READY_OR_OBSERVING` ||Interferometer is in observation ready mode: the LSC_LOCK+ guardian is in the nominal (observation) state. || ||3 ||`NO_STOCHASTIC_HW_INJ` ||No stochastic hardware injections present || ||4 ||`NO_CBC_HW_INJ` ||No compact binary coalescence hardware injections present || ||5 ||`NO_BURST_HW_INJ` ||No burst hardware injections present || ||6 ||`NO_DETCHAR_HW_INJ` ||No detector characterization hardware injections present || ||7 ||`NO_CW_HW_INJ` ||No continuous wave characterization hardware injections present || ||8 ||`TM_LINE_COH_OK` ||TM line coherence OK || ||9 ||`IM_LINE_COH_OK` ||IM line coherence OK || ||10 ||`MN_LINE_COH_OK` ||MN line coherence OK || ||11 ||`PCAL1_LINE_COH_OK` ||PCAL1 line coherence OK || ||12 ||`PCAL2_LINE_COH_OK` ||PCAL2 line coherence OK || ||13 ||`PCAL3_LINE_COH_OK` ||PCAL3 line coherence OK || ||14 ||`PCAL4_LINE_COH_OK` ||PCAL4 line coherence OK || ||15 ||`PCAL5_LINE_COH_OK` ||PCAL5 line coherence OK || ||16 ||`SMOOTH_KAPPA_TM_OK` ||TDCF smoothed $\kappa_\mathrm{TM}$ values are in the expected range || ||17 ||`SMOOTH_KAPPA_IM_OK` ||TDCF smoothed $\kappa_\mathrm{IM}$ values are in the expected range || ||18 ||`SMOOTH_KAPPA_MN_OK` ||TDCF smoothed $\kappa_\mathrm{MN}$ values are in the expected range || ||19 ||`SMOOTH_KAPPA_C_OK` ||TDCF smoothed $\kappa_\mathrm{C}$ value is in the expected range || ||20 ||`SMOOTH_F_CC_OK` ||TDCF smoothed $f_\mathrm{cc}$ value is in the expected range || ||21 ||`SMOOTH_F_S_OK` ||(reserved) TDCF smoothed $f_\mathrm{S}$ value is in the expected range || ||22 ||`SMOOTH_Q_S_OK` ||(reserved) TDCF smoothed $Q_\mathrm{S}$ value is in the expected range || ||23 ||`TDCFS_APPLIED` ||Time-dependent calibration factors are being applied || ||24 ||`LINE_SUBTRACTION_APPLIED` ||(reserved) Line subtraction are being applied || ||25 ||`NO_GAP` ||(reserved) Input data has no gaps, underflow, or overflow values || ||26 ||(not in use) ||(not in use) || ||27 ||(not in use) ||(not in use) || ||28 ||(not in use) ||(not in use) || ||29 ||(not in use) ||(not in use) || ||30 ||(not in use) ||(not in use) || ||31 ||(not in use) ||(not in use) || `HOFT_OK` Some channels were copied from DET channels `K1:DET-DQ_STATE_VECTOR` CAL state vector # bit 2 : SDF flag (= `K1:GRD-SYS_SDF_OK`) --> # bit 2 # bit 7 : NO Stoch injection --> # bit 3 # bit 8 : NO CBC injection --> # bit 4 # bit 9 : NO Burst injection --> # bit 5 # bit 10 : NO DET injection --> # bit 6 # bit 11 : NO CW injection --> # bit 7 `K1:DET-OBS_INTENT` --> CAL state vector: # bit 1 Question: Would we better to change the channel name from `K1:DCS-CALIB_STATE_VECTOR`'''_C10''' to `K1:DCS-CALIB_STATE_VECTOR` ? |
|
Line 2: | Line 70: |
Channels used for low-latency and offline calibration (July 12 - ...) ||<tablewidth="786px">'''Channel Name<<BR>>''' ||'''Rate<<BR>>''' ||'''Format<<BR>>''' ||'''Description<<BR>>''' || ||`K1:CAL-CS_PROC_MICH_RESIDUAL_DBL_DQ` ||16384 ||F64LE ||MICH error || ||`K1:CAL-CS_PROC_MICH_DELTA_CTRL_TM_DBL_DQ` ||4096 ||F64LE ||MICH TM stage control || ||`K1:CAL-CS_PROC_MICH_DELTA_CTRL_IM_DBL_DQ` ||4096 ||F64LE ||MICH IM stage control || ||`K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ` ||16384 ||F32LE ||MICH displacement (optional) || ||`K1:CAL-CS_PROC_IMC_RESIDUAL_DQ` ||16384 ||F32LE ||IMC error || ||`K1:CAL-CS_PROC_IMC_DELTA_CTRL_AOM_DQ` ||4096 ||F32LE ||IMC AOM frequency control || ||`K1:CAL-CS_PROC_IMC_DELTA_CTRL_TM_DQ` ||4096 ||F32LE ||IMC TM stage control || ||`K1:CAL-CS_PROC_IMC_FREQUENCY_DQ` ||16384 ||F32LE ||Laser frequency (optional) || ||`K1:GRD-LSC_LOCK_OK` ||16 ||F32LE ||LSC Guardian OK status || ||`K1:GRD-LSC_LOCK_STATE_N` ||16 ||F32LE ||LSC lock state || ||`K1:GRD-IO_OK` ||16 ||F32LE ||IMC Guardian OK status || ||`K1:GRD-IO_STATE_N` ||16 ||F32LE ||IMC state || Where F32LE and F64LE means: floating-point 32-bit and 64-bit numbers in Little-Endian format. Channels marked "optional" will not be used in the low-latency and offline computations, `K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ` and `K1:CAL-CS_PROC_IMC_FREQUENCY_DQ` in particular are the channels calibrated with the online system. ---------- Low-latency h(t) reconstruction server (Aug - Oct/31: DT,SH,TY,NK,...) * We already have [[KAGRA/Subgroups/CAL/WG/offline/gstlal|three computing nodes]] to test the offline h(t) reconstruction via frame file but we need to install another for the low-latency h(t) reconstruction via shared memory inside the tunnel * (Aug/20-) Connection and software test between a prototype PC and a test bench * Prototype PC is just a standard desktop PC and will be prepared by SH * (Aug-Sep) Procurement of server (2U height, at least two 10G network card, standard CPU,memory and disk) * According to Darkhan’s test with LIGO data and discussion with LIGO people, standard spec should be OK. * DT is working to figure out the spec and model. * Academia Sinica will make the procurement * (Mid.Sep) Connection test between the server and the test bench * We also need the collaboration with DMG people for the data transfer * (Sep-Oct) Connection test between the server and the KAGRA online system * We also need the collaboration with DMG people for the data transfer |
|
Line 4: | Line 112: |
Line 6: | Line 115: |
* Find names and versions of all prerequisite libraries * Install prerequisites and gstlal-cal package on a machine at AS * Test gstlal-cal pipeline on an AS machine * Install prerequisites and gstlal-cal package on a machine at KAGRA [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]] * Test the pipeline on a KAGRA machine [[KAGRA/Subgroups/CAL/WG/offline/tests|gstlal tests]] |
* Find names and versions of all prerequisite libraries * Install prerequisites and gstlal-cal package on a machine at AS * Test gstlal-cal pipeline on an AS machine * Install prerequisites and gstlal-cal package on a machine at KAGRA * Test the pipeline on a KAGRA machine Progress so far (June 21): * Ask LIGO CAL team for the detailed information of gstlal-calibration * '''(ongoing) gstlal-calibration maintainers in LIGO are helping to resolve some installation and testing issues.''' * Find names and versions of all prerequisite libraries, * '''(done, entry from June 7)''' SH made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]] * Install required packages and the gstlal-cal package on a machine at AS * '''DT has written scripts for installing lalsuite and gstlal software on a clean CentOS7 distro based on SH's instructions.''' Scripts were uploaded to KAGRA-AS group's Gitlab repositories: . [[https://gitlab.com/kagra-as/docker-lalsuite-cold|containerized "cold" version of lalsuite]] [[https://gitlab.com/kagra-as/docker-gstlal-cold|containerized "cold" version of gstlal-calibration]] * '''CI pipelines that build docker-lalsuite-cold and docker-gstlal-cold containers were set up to run on AS IoP machine.''' * Test gstlal-cal pipeline on an AS machine * '''As a prerequisite to this task, DT reproduced a portion of LIGO h(t) from raw data with gstlal-calibration-v1.1.8 (w/ a "docker-gstlal-cold" image).''' This test was done on a private server (2-cores on Intel Xeon 2.4GHz, 8GB RAM). * '''Downloaded a few hours of bKAGRA Phase-1 data on AS machine.''' * '''(doing) Will try to reproduce C00 with gstlal-calibration.''' Details in . [[https://gitlab.com/kagra-as/low-latency-cal/test-gstlal-on-cal-iop|gstlal-calibration testing on AS machine (cal-iop)]] * '''(to do) Verify the output of gstlal-calibration.''' * Install prerequisites and gstlal-cal package on a machine at KAGRA * '''(done, entry from June 7)''' SH made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]]. * Test the pipeline on a KAGRA machine [[KAGRA/Subgroups/CAL/WG/offline/tests|gstlal tests]] * '''to do''' * Documentation * '''(doing) Started documenting the work in KAGRA-AS group's Gitlab repositories:''' . [[https://gitlab.com/kagra-as/docker-lalsuite-cold|containerized "cold" version of lalsuite]] [[https://gitlab.com/kagra-as/docker-gstlal-cold|containerized "cold" version of gstlal-calibration]] [[https://gitlab.com/kagra-as/low-latency-cal/test-gstlal-on-cal-iop|gstlal-calibration testing on AS machine (cal-iop)]] |
Line 13: | Line 146: |
* Ask LIGO CAL team for the detailed information of gstlal-calibration * '''Communication with people working on LIGO gstlal has been initiated.''' * Find names and versions of all prerequisite libraries, * '''SK made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]]''' * Install prerequisites and gstlal-cal package on a machine at AS * '''As a prerequisite to this task, SK worked on installation process for CentOS, DT for Debian.''' * '''The goal is to have a better understanding of what is happening under the hood when the gstlal-calibration package is compiled.''' * Test gstlal-cal pipeline on an AS machine * '''As a prerequisite to this task, DT is currently trying to reproduce LIGO h(t) from raw data.''' * '''A sub-goal of this task is to come up with a gstlal code testing procedure.''' * '''DT addressed some questions to LIGO gstlal people.''' * Install prerequisites and gstlal-cal package on a machine at KAGRA * '''SK made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]]''' * Test the pipeline on a KAGRA machine [[KAGRA/Subgroups/CAL/WG/offline/tests|gstlal tests]] * '''to do''' |
* Ask LIGO CAL team for the detailed information of gstlal-calibration * '''Communication with people working on LIGO gstlal has been initiated.''' * Find names and versions of all prerequisite libraries, * '''SH made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]]''' * Install prerequisites and gstlal-cal package on a machine at AS * '''As a prerequisite to this task, SH worked on installation process for CentOS, DT for Debian.''' * '''The goal is to have a better understanding of what is happening under the hood when the gstlal-calibration package is compiled.''' * Test gstlal-cal pipeline on an AS machine * '''As a prerequisite to this task, DT is currently trying to reproduce LIGO h(t) from raw data.''' * '''A sub-goal of this task is to come up with a gstlal code testing procedure.''' * '''DT addressed some questions to LIGO gstlal people.''' * Install prerequisites and gstlal-cal package on a machine at KAGRA * '''SH made progress on this, see [[KAGRA/Subgroups/CAL/WG/offline/gstlal|gstlal installation]]''' * Test the pipeline on a KAGRA machine [[KAGRA/Subgroups/CAL/WG/offline/tests|gstlal tests]] * '''to do''' |
Line 30: | Line 164: |
* Put more effort on documentation. | * Put more effort on documentation. |
Prepare h(t) reconstruction review
LIGO time-domain calibration review wiki: https://wiki.ligo.org/Calibration/TDCalibReview
Calibration State Vector (K1:DCS-CALIB_STATE_VECTOR_C10)
(Under preparation. It's planned to be used in O3b)
bit |
Identifier |
Description |
0 |
HOFT_OK |
$h(t)$ was successfully computed (logical AND of bits ...) |
1 |
OBS_INTENT |
The observation intent is set by the operator |
2 |
OBS_READY_OR_OBSERVING |
Interferometer is in observation ready mode: the LSC_LOCK+ guardian is in the nominal (observation) state. |
3 |
NO_STOCHASTIC_HW_INJ |
No stochastic hardware injections present |
4 |
NO_CBC_HW_INJ |
No compact binary coalescence hardware injections present |
5 |
NO_BURST_HW_INJ |
No burst hardware injections present |
6 |
NO_DETCHAR_HW_INJ |
No detector characterization hardware injections present |
7 |
NO_CW_HW_INJ |
No continuous wave characterization hardware injections present |
8 |
TM_LINE_COH_OK |
TM line coherence OK |
9 |
IM_LINE_COH_OK |
IM line coherence OK |
10 |
MN_LINE_COH_OK |
MN line coherence OK |
11 |
PCAL1_LINE_COH_OK |
PCAL1 line coherence OK |
12 |
PCAL2_LINE_COH_OK |
PCAL2 line coherence OK |
13 |
PCAL3_LINE_COH_OK |
PCAL3 line coherence OK |
14 |
PCAL4_LINE_COH_OK |
PCAL4 line coherence OK |
15 |
PCAL5_LINE_COH_OK |
PCAL5 line coherence OK |
16 |
SMOOTH_KAPPA_TM_OK |
TDCF smoothed $\kappa_\mathrm{TM}$ values are in the expected range |
17 |
SMOOTH_KAPPA_IM_OK |
TDCF smoothed $\kappa_\mathrm{IM}$ values are in the expected range |
18 |
SMOOTH_KAPPA_MN_OK |
TDCF smoothed $\kappa_\mathrm{MN}$ values are in the expected range |
19 |
SMOOTH_KAPPA_C_OK |
TDCF smoothed $\kappa_\mathrm{C}$ value is in the expected range |
20 |
SMOOTH_F_CC_OK |
TDCF smoothed $f_\mathrm{cc}$ value is in the expected range |
21 |
SMOOTH_F_S_OK |
(reserved) TDCF smoothed $f_\mathrm{S}$ value is in the expected range |
22 |
SMOOTH_Q_S_OK |
(reserved) TDCF smoothed $Q_\mathrm{S}$ value is in the expected range |
23 |
TDCFS_APPLIED |
Time-dependent calibration factors are being applied |
24 |
LINE_SUBTRACTION_APPLIED |
(reserved) Line subtraction are being applied |
25 |
NO_GAP |
(reserved) Input data has no gaps, underflow, or overflow values |
26 |
(not in use) |
(not in use) |
27 |
(not in use) |
(not in use) |
28 |
(not in use) |
(not in use) |
29 |
(not in use) |
(not in use) |
30 |
(not in use) |
(not in use) |
31 |
(not in use) |
(not in use) |
HOFT_OK
Some channels were copied from DET channels
K1:DET-DQ_STATE_VECTOR CAL state vector
# bit 2 : SDF flag (= K1:GRD-SYS_SDF_OK) --> # bit 2
# bit 7 : NO Stoch injection --> # bit 3
# bit 8 : NO CBC injection --> # bit 4
# bit 9 : NO Burst injection --> # bit 5
# bit 10 : NO DET injection --> # bit 6
# bit 11 : NO CW injection --> # bit 7
K1:DET-OBS_INTENT --> CAL state vector: # bit 1
Question: Would we better to change the channel name from K1:DCS-CALIB_STATE_VECTOR_C10 to K1:DCS-CALIB_STATE_VECTOR ?
Low-latency and offline
Channels used for low-latency and offline calibration (July 12 - ...)
Channel Name |
Rate |
Format |
Description |
K1:CAL-CS_PROC_MICH_RESIDUAL_DBL_DQ |
16384 |
F64LE |
MICH error |
K1:CAL-CS_PROC_MICH_DELTA_CTRL_TM_DBL_DQ |
4096 |
F64LE |
MICH TM stage control |
K1:CAL-CS_PROC_MICH_DELTA_CTRL_IM_DBL_DQ |
4096 |
F64LE |
MICH IM stage control |
K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ |
16384 |
F32LE |
MICH displacement (optional) |
K1:CAL-CS_PROC_IMC_RESIDUAL_DQ |
16384 |
F32LE |
IMC error |
K1:CAL-CS_PROC_IMC_DELTA_CTRL_AOM_DQ |
4096 |
F32LE |
IMC AOM frequency control |
K1:CAL-CS_PROC_IMC_DELTA_CTRL_TM_DQ |
4096 |
F32LE |
IMC TM stage control |
K1:CAL-CS_PROC_IMC_FREQUENCY_DQ |
16384 |
F32LE |
Laser frequency (optional) |
K1:GRD-LSC_LOCK_OK |
16 |
F32LE |
LSC Guardian OK status |
K1:GRD-LSC_LOCK_STATE_N |
16 |
F32LE |
LSC lock state |
K1:GRD-IO_OK |
16 |
F32LE |
IMC Guardian OK status |
K1:GRD-IO_STATE_N |
16 |
F32LE |
IMC state |
Where F32LE and F64LE means: floating-point 32-bit and 64-bit numbers in Little-Endian format.
Channels marked "optional" will not be used in the low-latency and offline computations, K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ and K1:CAL-CS_PROC_IMC_FREQUENCY_DQ in particular are the channels calibrated with the online system.
Low-latency h(t) reconstruction server (Aug - Oct/31: DT,SH,TY,NK,...)
We already have three computing nodes to test the offline h(t) reconstruction via frame file but we need to install another for the low-latency h(t) reconstruction via shared memory inside the tunnel
- (Aug/20-) Connection and software test between a prototype PC and a test bench
- Prototype PC is just a standard desktop PC and will be prepared by SH
- (Aug-Sep) Procurement of server (2U height, at least two 10G network card, standard CPU,memory and disk)
- According to Darkhan’s test with LIGO data and discussion with LIGO people, standard spec should be OK.
- DT is working to figure out the spec and model.
- Academia Sinica will make the procurement
- (Mid.Sep) Connection test between the server and the test bench
- We also need the collaboration with DMG people for the data transfer
- (Sep-Oct) Connection test between the server and the KAGRA online system
- We also need the collaboration with DMG people for the data transfer
Current tasks (May 26 - July 15):
Ask to LIGO CAL team for the detailed information of gstlal-calibration (DT) [status: ongoing | expected finish: N/A]
Make gstlal-calibration running on a machine at KAGRA (DT, SH) [status: ongoing | expected finish: Jul 15]
- Find names and versions of all prerequisite libraries
- Install prerequisites and gstlal-cal package on a machine at AS
- Test gstlal-cal pipeline on an AS machine
- Install prerequisites and gstlal-cal package on a machine at KAGRA
- Test the pipeline on a KAGRA machine
Progress so far (June 21):
- Ask LIGO CAL team for the detailed information of gstlal-calibration
(ongoing) gstlal-calibration maintainers in LIGO are helping to resolve some installation and testing issues.
- Find names and versions of all prerequisite libraries,
(done, entry from June 7) SH made progress on this, see gstlal installation
- Install required packages and the gstlal-cal package on a machine at AS
DT has written scripts for installing lalsuite and gstlal software on a clean CentOS7 distro based on SH's instructions. Scripts were uploaded to KAGRA-AS group's Gitlab repositories:
CI pipelines that build docker-lalsuite-cold and docker-gstlal-cold containers were set up to run on AS IoP machine.
- Test gstlal-cal pipeline on an AS machine
As a prerequisite to this task, DT reproduced a portion of LIGO h(t) from raw data with gstlal-calibration-v1.1.8 (w/ a "docker-gstlal-cold" image). This test was done on a private server (2-cores on Intel Xeon 2.4GHz, 8GB RAM).
Downloaded a few hours of bKAGRA Phase-1 data on AS machine.
(doing) Will try to reproduce C00 with gstlal-calibration. Details in
(to do) Verify the output of gstlal-calibration.
- Install prerequisites and gstlal-cal package on a machine at KAGRA
(done, entry from June 7) SH made progress on this, see gstlal installation.
Test the pipeline on a KAGRA machine gstlal tests
to do
- Documentation
(doing) Started documenting the work in KAGRA-AS group's Gitlab repositories:
Progress so far (June 7):
- Ask LIGO CAL team for the detailed information of gstlal-calibration
Communication with people working on LIGO gstlal has been initiated.
- Find names and versions of all prerequisite libraries,
SH made progress on this, see gstlal installation
- Install prerequisites and gstlal-cal package on a machine at AS
As a prerequisite to this task, SH worked on installation process for CentOS, DT for Debian.
The goal is to have a better understanding of what is happening under the hood when the gstlal-calibration package is compiled.
- Test gstlal-cal pipeline on an AS machine
As a prerequisite to this task, DT is currently trying to reproduce LIGO h(t) from raw data.
A sub-goal of this task is to come up with a gstlal code testing procedure.
DT addressed some questions to LIGO gstlal people.
- Install prerequisites and gstlal-cal package on a machine at KAGRA
SH made progress on this, see gstlal installation
Test the pipeline on a KAGRA machine gstlal tests
to do
New tasks:
- Put more effort on documentation.