How to change model name or DCU number on standalone setpu.

1. Make a new .mdl RT model file using Simlink of Matlab or copy the existing .mdl file under /opt/rtcds/tst/x1/core/advLigoRTS/trunk/src/epics/simLink/.
2. If you want to change druid on an existing model, start matlab on 'desktop1' PC, open the x1x30.mdl, and change dcuid on left top box.

3. Go RT PC as

   ssh -Y XXX

   (XXX = RT PC host name like standalone)

4. > cd /opt/rtcds/tst/x1/core/advLigoRTS/trunk

5. build model as

   > ./dbuild xxx.mdl

   (xxx = model name like x1scx)
6. Verify no error message
7. Then modify /etc/rtsystab to put the new model name or change existing model to the new one.
8. Modify /opt/rtcds/tst/x1/target/fb/master
9. And /opt/rtcds/tst/x1/target/fb/daqdrc if you changed DUC number.
10. /opt/rtcds/tst/x1/target/gds/param/testpoint.par should be modified automatically when you build.

11. define and activate DAQ channels using

    > daqconfig &

12. kill old model like

    > killyyy

    (yyy = existing old model name like x1x15) and start the new model by typing

    > startxxx

    (xxx = model name like x1scx) on any directly, or just reboot RT PC as

    >sudo reboot