|
Size: 586
Comment:
|
Size: 1395
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = LCGT Timing System = | ## page was renamed from LCGT/subgroup/ifo/digital/Timing = KAGRA Timing System = |
| Line 3: | Line 4: |
| The LCGT timing system will be a dead copy of the advanced LIGO timing system :-) | ---- |
| Line 5: | Line 6: |
| == Functions == * Provides accurate time information to all the stations in the LCGT. * The system provides 2^N Hz clock signals synchronized with the GPS seconds. * The system also distributes the absolute time information to the DAQ hardwares so that each sample recorded will be unambiguously associated with an absolute GPS second. |
== Note of the Meeting with Zsuzsa (Jul 15, 2016 at Columbia University)== |
| Line 11: | Line 8: |
| == LIGO Documents == | === Suggestions (random order) === * You may not want more IRIG-B boards because there is Dsub output on the back of IRIG-B board with which we can convert to BNC to use more outputs. * It's better to connect two GPS antennas to Master board so that one can be used when the other signal is lost. * In the master board, VCXO is not available in the market anymore. However Szusza has spares. * In the comparator board, there is one chip which gets very hot. Make sure to cool it down. * Check if the leap second is correctly compensated in the oldest IRIG-B (one arrived on 5/7/2012, installed in the front room). iKAGRA timing might have been off 1 sec! == Reference == ==== LIGO Documents ==== |
| Line 13: | Line 20: |
| * [[https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=485|Quick Start Guide Optical Timing Distribution System Advanced LIGO]] * [[https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=492|Timing Master Module/Fanout Module]] * [[https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=21665|Circuit Schematic]] * [[https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=493|Slave Module]] |
KAGRA Timing System
== Note of the Meeting with Zsuzsa (Jul 15, 2016 at Columbia University)==
Suggestions (random order)
- You may not want more IRIG-B boards because there is Dsub output on the back of IRIG-B board with which we can convert to BNC to use more outputs.
- It's better to connect two GPS antennas to Master board so that one can be used when the other signal is lost.
- In the master board, VCXO is not available in the market anymore. However Szusza has spares.
- In the comparator board, there is one chip which gets very hot. Make sure to cool it down.
- Check if the leap second is correctly compensated in the oldest IRIG-B (one arrived on 5/7/2012, installed in the front room). iKAGRA timing might have been off 1 sec!
Reference