Differences between revisions 1 and 12 (spanning 11 versions)

Simulation meeting 2020 Aug 26, 15:00-

Participants

Yuzu, Koyama, Kokeyama, Hirose, Izumi, Michimura, Wang, Park

Minutes

Updates from Projects

Birefringence birefringence_FINESSE.pdf
- Phase relations of s-pol and p-pol need to be checked.
- A BS model has been built for PRMI. Resonances of carrier and RF sidebands are checked.
- We want to check if the S and P relative phase difference is equivalent to the reality with some experiments maybe using the POP S and P port. We will think what should be done and keep discussing.
Finesse interface
- Kamioka activity log
- Created a GUI with FPMI model to start with
- python script is updated on git
Ifo model
- DRFPMI: simple cross check is done DRFPMI note
- Ready for simulations
- HOM expansion hasn't started yet
OMC modeling (June Gyu)
- I found that I did completely wrong.
- Rebuild the model after cross check at meeting.
- OMC model drawing https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11955

KAGRA/Subgroups/MIF/Simulation/SimMeeting20200826 (last edited 2020-08-26 17:57:17 by haoyu.wang)

-  ⇤ ← Revision 1 as of 2020-08-25 11:47:34 → 
  Size: 167
  Editor: KeikoKokeyama
  Comment:
+   ← Revision 12 as of 2020-08-26 15:56:49 → ⇥
  Size: 1297
  Editor: KeikoKokeyama
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
-== Agenda ==
+Yuzu, Koyama, Kokeyama, Hirose, Izumi, Michimura, Wang, Park
== Minutes ==
 Line 7:
- * Birefringence
+ * Birefringence [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11792|birefringence_FINESSE.pdf]]
  * Phase relations of s-pol and p-pol need to be checked.
  * A BS model has been built for PRMI. Resonances of carrier and RF sidebands are checked.
  * We want to check if the S and P relative phase difference is equivalent to the reality with some experiments maybe using the POP S and P port. We will think what should be done and keep discussing.
-Line 9:
+Line 12:
+  * [[KAGRA/Subgroups/MIF/Simulation/KamikokaActivity20200817|Kamioka activity log]]
  * Created a GUI with FPMI model to start with
  * python script is updated on git
-Line 10:
+Line 16:
+  * DRFPMI: simple cross check is done [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11921|DRFPMI note]]
  * Ready for simulations
  * HOM expansion hasn't started yet
 * OMC modeling (June Gyu)
  * I found that I did completely wrong.
  * Rebuild the model after cross check at meeting.
  * OMC model drawing [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11955]]