Differences between revisions 1 and 3 (spanning 2 versions)
⇤ ← Revision 1 as of 2021-10-26 12:01:53 →
Size: 185
Editor: matteo.leonardi
Comment:
← Revision 3 as of 2021-10-27 16:03:49 → ⇥
Size: 1158
Editor: matteo.leonardi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= MIR Meeting on 2021/10/26 15:00 - 16:00 =
Participants: 		= MIR Meeting on 2021/10/27 15:00 - 16:00 =
Participants: Matteo, Haoyu, HYamamoto, Abe, KYamamoto, Marc, Marco, Katsuki, Simon, Aso, Michimura
Line 5: Line 5:
2021 November ??, 15:00 - 16:00 2021 November 24, 15:00 - 16:00
Line 8: Line 8:
 1.  1. Report from KYamamoto-san about Q measurement at cryo temperature
  * new contact point (from 2mm to 1mm) for disk suspension seems promising but has some stability issue -> new contact point with 1.5mm will be tested
  * measured Q for 20(x2) layer stack is 8e-4 which is larger than expected -> the impact in BRSE sensitivity seems to be <2%, impact in DRSE will be investigated by MIF
 1. Report from Simon about birefringence paper
  * impact of input beam direction is being investigated -> does not seems to impact in the measurement at the first order
  * for future works, the impact of c-axis direction will be evaluated
 1. Report from Marc on measurements
  * currently measuring TAMA #1 sample (Shinkosha)
 1. Report from Haoyu on birefringence simulations (from TWE)
  * correct orientation angle of TWE maps has been obtained, computation with general model ongoing

MIR Meeting on 2021/10/27 15:00 - 16:00

Participants: Matteo, Haoyu, HYamamoto, Abe, KYamamoto, Marc, Marco, Katsuki, Simon, Aso, Michimura

Next meeting

2021 November 24, 15:00 - 16:00

Minutes

  1. Report from KYamamoto-san about Q measurement at cryo temperature

    • new contact point (from 2mm to 1mm) for disk suspension seems promising but has some stability issue -> new contact point with 1.5mm will be tested

    • measured Q for 20(x2) layer stack is 8e-4 which is larger than expected -> the impact in BRSE sensitivity seems to be <2%, impact in DRSE will be investigated by MIF

  2. Report from Simon about birefringence paper

    • impact of input beam direction is being investigated -> does not seems to impact in the measurement at the first order

    • for future works, the impact of c-axis direction will be evaluated
  3. Report from Marc on measurements
    • currently measuring TAMA #1 sample (Shinkosha)
  4. Report from Haoyu on birefringence simulations (from TWE)
    • correct orientation angle of TWE maps has been obtained, computation with general model ongoing

Agenda

  • various updates
  • AOB

KAGRA/Subgroups/MIR/Meetings/Minutes20211026 (last edited 2021-10-27 16:03:49 by matteo.leonardi)