Infomation

• If you want to know more about Picomotor drivers, you can find them here. See PicoMotor

• If you want to know more about the Picomotor's power control switch, please see here. See PicomotorPowerControlSwitch

How to use

Open the operation screen

1.Login to your workstation.

2.Open sitemap.

• 

3.Open [sitemap]-[PICO OVERVIEW]

• 

4 Press the Picomotor to be operated.

Operation Description

1.Start Script first.

• Pressing ON initiates communication with the Picomotor driver.
• It cannot be operated if it is left OFF.

• If it switches to ON and then back to OFF, the Picomotor may be turned off or the Picomotor driver may be hung.
• If this is the case, try rebooting with the rebooter.

2.Put the amount of movement in STEP.

3. Press the [FWD >>] and [<< REV] buttons to drive the motor.

• Drive in the positive direction with [FWD >>] and in the negative direction with [<< REV].

4.[?] Press to update the value of [TOTAL]. If the motor is being driven, the position in the middle will be displayed.

Other operations

[!Power]-[Turn Off],[Turn On],[Reboot]:

• 

• If this indication is present, the Picomotor can be [Turn on], [Turn off], or [Reboot]. If there is no indication, it is not connected to the switch.
• This menu is used when Picomotor hangs and Script does not start. If it does, please press [Reboot] to Start Script again.

[!Log]:

• The text of Picomotor's driving history will be displayed.
• These history files are not editable.
• The [old Pico Log] is the old log. This log contains the history of all the motors and is a very large file.
• [Pico Log] is the log for each Picomotor driver. It is a very small file. Please refer to this log in general.
• [Pico Power Control Log] is a log of the power control of the rebooter. It is used for maintenance.

[!ndscope]:

• Open NDScope.
  • This menu may or may not have submenus.
  • If there is no submenu, it will show the Picomotor's drive and current position.
  • If there is, you can choose to display something else.