Diff for "KAGRA/Subgroups/VIS/Type-C"

Differences between revisions 102 and 151 (spanning 49 versions)

Type-C (TAMA) suspension

Type-C suspension is a small double pendulum with intermediate mass passively damped by eddy current damping. Some of the type-C suspensions were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.
Note by K. Arai(2014)

iKAGRA

In 2017, 5 Type-C suspensions were installed in iKAGRA.
In the final iKAGRA configuration, 7 mirrors were suspended and 6 of them were Type-C.

====MC mirrors==== Mode cleaner suspension are used even after the iKAGRA. PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness of about 3cm, were installed. The others were TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm. The last one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.

Work log about 2 iKAGRA ETMs is here.

ETM Transfer function
long term drift

bKAGRA

Two suspensions used at the X/Y ends, are used as IMMT1 and IMMT2 for bKAGRA.
Memo by Yamamoto-san
IMMT Preparation
Design change for new suspensions(by K. Arai)

Drawings

OSEM
Drawings
Magnet and standoff fixture jig
IMC_suspension

-  ⇤ ← Revision 102 as of 2016-02-29 13:23:43 → 
  Size: 250
  Editor: NaokoOhishi
  Comment:
+   ← Revision 151 as of 2019-03-15 11:23:49 → ⇥
  Size: 1617
  Editor: NaokoOhishi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-== Type-C suspensions ==
+== Type-C (TAMA) suspension ==

 Type-C suspension is a small double pendulum with intermediate mass passively damped by eddy current damping. Some of the type-C suspensions were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension. 

 *[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/IMC%20Suspension|Note by K. Arai(2014)]]
-Line 4:
+Line 8:
-TAMA-type suspensions were used for iKAGRA.<<BR>>
 3 PO type; MC_i, MC_e, MC_o and 2 TM or RM type; ETMX, ETMY.
  
 Work log related to 2TM is [[KAGRA/Subgroups/VIS/Type-C/iKAGRA_ETM|iKAGRA_ETM]]
+In 2017, 5 Type-C suspensions were installed in iKAGRA.<<BR>>
In the final iKAGRA configuration, 7 mirrors were suspended and 6 of them were Type-C.

====MC mirrors====
Mode cleaner suspension are used even after the iKAGRA.
PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness of about 3cm, were installed.
The others were TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm.
The last one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.
-Line 9:
+Line 18:
+Work log about 2 iKAGRA ETMs is [[KAGRA/Subgroups/VIS/Type-C/iKAGRA_ETM|here]].

 * ETM Transfer function
 * long term drift

=== bKAGRA ===

 *Two suspensions used at the X/Y ends, are used as IMMT1 and IMMT2 for bKAGRA.
 [[KAGRA/Subgroups/VIS/iKAGRAbKAGRA|Memo by Yamamoto-san]]
 *[[KAGRA/Subgroups/VIS/Type-C/IMMT|IMMT Preparation]]
 
 *[[KAGRA/Subgroups/VIS/Type-C/Design2016|Design change for new suspensions(by K. Arai)]]

=== Drawings ===
 *[[KAGRA/Subgroups/VIS/Type-C/OSEM|OSEM]]
 *[[KAGRA/Subgroups/VIS/Type-C/Drawings|Drawings]]
 *Magnet and standoff fixture jig
 *[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/IMC%20Suspension|IMC_suspension]]