Differences between revisions 127 and 147 (spanning 20 versions)
⇤ ← Revision 127 as of 2016-08-09 10:36:06 →
Size: 1449
Editor: NaokoOhishi
Comment:
← Revision 147 as of 2019-03-15 10:46:48 → ⇥
Size: 1508
Editor: NaokoOhishi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
 Type-C suspension is a relatively small double pendulum with intermediate mass passively damped with eddy current damping. Among the large suspensions used in KAGRA, type-C is the smallest one. Some of the type-C were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.  Type-C suspension is a small double pendulum with intermediate mass passively damped by eddy current damping. Some of the type-C suspensions were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.

 *[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/IMC%20Suspension|Note by K. Arai(2014)]]
Line 7: Line 9:
 Five TAMA-type suspensions were used in iKAGRA.<<BR>>
 In the final iKAGRA configuration, 7 mirrors are suspended and 6 of them are Type-C.
 Three are PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness with about 3cm,
 and 2 are TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of 6cm.
 Other one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.		  In 2017, 5 Type-C suspensions were installed in iKAGRA.<<BR>>
 In the final iKAGRA configuration, 7 mirrors were suspended and 6 of them were Type-C.
 Three were PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness of about 3cm,
 and the others were TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm.
 The last one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.
Line 15: Line 17:
 * Transfer function of ETM  * ETM Transfer function
 * long term drift
Line 17: Line 20:
=== Toward bKAGRA === === bKAGRA ===
Line 19: Line 22:
 *Two suspensions that were used as at the X/Y end, will be used at IMMT for bKAGRA.
 [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/VIS/iKAGRAbKAGRA|Memo by Yamamoto-san]]		  *Two suspensions used at the X/Y ends, are used as IMMT1 and IMMT2 for bKAGRA.
 [[KAGRA/Subgroups/VIS/iKAGRAbKAGRA|Memo by Yamamoto-san]]
Line 22: Line 25:
 *[[KAGRA/Subgroups/VIS/Type-C/IMC|IMC Modification]]
=== bKAGRA ===
Line 25: Line 26:
 [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/VIS/Type-C/Design2016|Design change for new suspensions]]  *[[KAGRA/Subgroups/VIS/Type-C/Design2016|Design change for new suspensions(by K. Arai)]]
Line 27: Line 28:
=== References === === Drawings ===
Line 29: Line 30:
 *Drawings
 *		  *[[KAGRA/Subgroups/VIS/Type-C/Drawings|Drawings]]
 *Magnet and standoff fixture jig
 *[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/IMC%20Suspension|IMC_suspension]]

Type-C (TAMA) suspension

  • Type-C suspension is a small double pendulum with intermediate mass passively damped by eddy current damping. Some of the type-C suspensions were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.

  • Note by K. Arai(2014)

iKAGRA

  • In 2017, 5 Type-C suspensions were installed in iKAGRA.
    In the final iKAGRA configuration, 7 mirrors were suspended and 6 of them were Type-C. Three were PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness of about 3cm, and the others were TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm. The last one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.

    Work log about 2 iKAGRA ETMs is here.

  • ETM Transfer function
  • long term drift

bKAGRA

Drawings

KAGRA/Subgroups/VIS/Type-C (last edited 2020-04-30 12:05:11 by KousekiMiyo)