|
Size: 4217
Comment:
|
← Revision 21 as of 2017-10-05 13:35:59 ⇥
Size: 6066
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| '''The big table below is best edited in Firefox, because then you can use the "GUI Mode" editor.''' | |
| Line 5: | Line 6: |
| * Y? = we vaguely recall having this but we need to check | * Y? = we vaguely recall having this but we need to check |
| Line 8: | Line 9: |
| * O = someone was asked to order this but we need to check | * O? = someone was asked to order this but we need to check |
| Line 14: | Line 15: |
| ||Item ||-2 Do we have it?||Notes || || ||SR3 ||SR2 ||SRM |||| |
||Item ||||||<style="text-align:center">Do we have it? ||Notes || || ||SR3 ||SR2 ||SRM || || |
| Line 17: | Line 18: |
| ||Cleanbooth cleaning||Y!||Y!||Y!||SR2 may need some recleaning after crane slot work|| ||Cleanbooth second floor work|| || || || || || || || || || || ||Feedthrough Adapters (Parts) ||Y ||Y ||Y || || ||Feedthroughs ||Y ||Y ||Y? || || ||PI ||Y! ||Y! ||Y? ||2 in center; check status of third with Sato-san|| ||Accelerometers or Geophones ||N ||N ||N || || ||Geophone Adapter Parts ||O? ||O? ||O? ||Takahashi was going to order|| ||Geophone Adapters ||O ||O ||O ||check with Sato-san || ||Other PI-Flange Cables ||O ||O ||O ||check with Sato-san || ||Cable Clamps on PI Blade Spring Bases ||? ||? ||? || || |
||Cleanbooth second floor work ||O ||O ||N || || ||Connect tank top ||?? ||N ||N ||need to check with Saito-sensei || ||Add LBB ||O! ||O! ||O! ||SR3 scheduled for 2017/10/18-20 || ||Assembly frame #2 ||Y! ||Y ||Y || || ||Assembly frame construction ||Y!||Y!||N ||Have SR3 and SR2; will need to move one to SRM eventually. || ||Feedthrough Adapter Parts (DSub9 M&F) ||N? ||N? ||N? ||Type Bp used up the supply || ||Feedthroughs ||Y ||Y ||Y? ||check with Takahashi-san || ||PI (with MW, IP LVDTs, IP steppers fitted) ||Y! ||Y! ||Y? ||2 in center; Sato-san will do third. || ||F0 yaw mechanism ||? ||? ||? ||probably have but needs redesign -> Fabian || ||Geophones ||O? ||O? ||O? ||Takahashi-san was going to order these FY [[KAGRA/Subgroups/VIS/VISMinutes20170224|20170224]] || ||Geophone pods ||Y ||Y ||Y ||[[KAGRA/Subgroups/VIS/VISMinutes20170224|20170224]] || ||Geophone preamps ||O? ||O? ||O? ||Takahashi-san says can get from Nikhef [[KAGRA/Subgroups/VIS/VISMinutes20170224|20170224]] || ||Geophone adapters (in-vac) ||O ||O ||O ||check with Sato-san || ||Arc weights ||N ||N ||N || || ||PI-Flange Cables(Type 1, Type 3; F-F) ||O ||O ||O ||check Sato-san's spreadsheet || ||Cable Clamps on PI Blade Spring Bases ||N! ||N! ||N! ||Hirata-san to design || |
| Line 31: | Line 37: |
| ||Lower Breadboard Springs ||? ||? ||? || || ||Lower Breadboard Spring Bases ||? ||? ||? || || ||Lower Breadboard Rods ||N ||N ||N || || ||Lower Breadboard Rod Part Mods ||N ||N ||? || || ||Lower Breadboard Damper Rings ||Y ||Y ||Y || || |
||LBB blades ||N ||N ||N ||need to modify design: rings lighter (same as BS), LBB heavier (not cut) || ||LBB blade bases ||N ||N ||N ||need to order || ||LBB Rods (including nailheads etc) ||O! ||O! ||O! || || ||LBB Rod Receptacles ||N ||N ||N || || ||LBB Damper Rings ||N ||N ||N || || |
| Line 37: | Line 43: |
| ||Magnets ||Y? ||Y? ||Y? || || ||Magic Wand ||Y? ||Y? ||Y? || || ||Fishing Rod ||Y? ||Y? ||Y? || || ||Security Structure (SS) ||Y? ||Y? ||N? || || |
||Magnets (10x10x10 for SF, LBB) ||Y? ||Y? ||Y? ||need to count || ||Magic Wand for SF ||Y! ||Y! ||Y! || || ||Magic Wand for F0 ||? ||? ||? ||check with Sato-san || ||Fishing Rod for SF, BF ||Y! ||Y! ||Y! ||Hirata-san installed || ||Fishing Rod for F0 ||? ||? ||? ||check with Sato-san || ||Fishing Rods for PI ||? ||? ||? ||check with Sato-san || ||Security Structure (SS) ||Y ||Y ||Y ||in center area; need to do stocktake || |
| Line 42: | Line 51: |
| ||SF ||Y ||Y ||Y || || ||Cable Clamps on SF ||Y ||Y ||N? || || ||SF_PI Cables ||? ||? ||? || || ||BF ||Y ||Y ||Y || || ||Cable clamps on BF ||Y ||Y ||N? || || ||BF-PI Cables ||? ||? ||N? || || ||Payload parts per original design ||Y ||Y ||? || || ||Payload mods per PR3 ||? ||? || || || ||IRM ||Y ||Y ||N || || ||IRM OSEMs ||Akutsu-san ||Akutsu-san ||Akutsu-san || || ||IM ||Y ||Y ||N || || ||Cable Clamps on IM ||? ||? ||N || || |
||SF ||Y! ||Y! ||Y! || || ||Cable Clamps on SF ||N ||N ||N || || ||SF-PI Cables(Type 2, Type 4) ||O? ||O? ||O? ||check Sato-san's spreadsheet || ||BF ||Y! ||Y! ||Y! || || ||Cable clamps on BF ||N ||N ||N || || ||BF-PI Cables (Type 2, Type 4) ||O? ||O? ||O? ||check Sato-san's spreadsheet || ||IRM parts ||Y ||N ||N || || ||IRM lock screws ||N ||N ||N || || ||IRM OSEMs ||N ||N ||N ||Need to give need dates to Akutsu-san ASAP || ||IM parts ||Y ||N ||N || || ||Cable Clamps on IM ||Y ||Y ||Y || || |
| Line 55: | Line 63: |
| ||IM Wire Clamp Mods ||N ||N ||? || || ||Compensation masses for IM ||? ||? ||? || || ||SR IM Flags ||N ||N ||N || || ||SR IM Flag Magnets ||? ||? ||? || || ||IM-BF Cables (OSEM/pico) ||N? ||N? ||N? || || ||Wires ||N ||N ||N || || ||Safety Bar ||Y ||Y ||N || || ||RM ||Y ||Y ||Y || || ||EQ Stop Screws ||Y ||Y ||Y || || ||RM OSEMs ||Akutsu-san ||Akutsu-san ||Akutsu-san || || ||Dummy SR ||? ||? ||? ||Use PRx dummy? || ||Mirrors for Dummy SR ||Y? ||Y? ||Y? || || ||Real SR2, SR3 ||Hirose-san ||Hirose-san ||Hirose-san || || ||SR Sapphire Primary Prisms ||with BS ||with BS ||with BS ||Assume can reuse prisms on dummy BS || ||SR Secondary Prisms ||N ||N ||N || || ||SR Optic Flags ||N ||N ||N || || ||SR Optic Flag Magnets ||N ||N ||N || || ||SR Mirror Box (Tatsumi) ||Y? ||Y? ||Y? ||Maybe reuse PRx mirror box || ||SR Mirror Box Mods (Tatsumi) ||Y ||Y ||Y || || ||RM-BF Cables ||Y ||Y ||Y || || |
||IM Wire Clamp Mods ||N ||N ||N ||waiting second quote || ||Ballast/trim masses for IM ||? ||? ||? || || ||IM Flags ||N ||N ||N ||ordered by Shoda-san; need to stocktake || ||IM Flag Magnets(10xØ10) ||? ||? ||? || || ||IM-BF Cables (Type 5-1.7, pico) ||O? ||O? ||O? ||check Sato-san's spreadsheet || ||Wires ||N ||N ||N ||(easy to order; hard to clean) || ||Safety Bar ||Y ||N ||N ||recycle from PR? || ||RM ||Y ||? ||? ||ask Takahashi-san || ||EQ Stop Screws ||Y ||Y ||Y ||for RM to optic || ||RM OSEMs ||O ||N ||N ||Aso-san || ||Real SR2, SR3 ||O! ||O ||O ||SR3 expected ≈2017-11-27 || ||Sapphire Primary Prisms ||Y ||O? ||O? ||have 2; 8 more were to be ordered [[KAGRA/Subgroups/VIS/VISMinutes20161209|20161209]] || ||Secondary Prisms ||N ||N ||N || || ||Optic Magnet Standoffs ||O? ||O? ||O? ||Aso-san || ||Optic Magnets ||N ||N ||N ||Aso-san || ||Magnet gluing jigs ||||||<style="text-align:center">Y ||Aso-san || ||Mirror Box ||Y ||Y ||Y ||use PRx mirror box; need to find, especially custom feet || ||RM-BF Cables (Type 5-2.2) ||O ||O ||O ||check Sato-san's spreadsheet || |
| Line 76: | Line 82: |
| ||Fasteners ||Y ||Y ||N || || ||Pico Driver/Joystick ||Y ||Y ||? || || ||Stepper Motors || || ||<style="text-align:center">? || || |
||Fasteners ||1/2 ||N ||N || || ||Pico Driver ||? ||N ||N ||we needed to order more because original count off by 2 || |
| Line 82: | Line 87: |
| ||AEL: AA Chassis D1100621 ||Y ||Y ||Y || || ||AEL: AI Chassis D1101521 ||Y ||Y ||Y || || ||AEL: Ethernet Hub ||Y ||Y ||Y || || ||AEL: Geophone Distributor D1402120 ||Y ||Y ||Y || || ||AEL: High Power Coil Driver D1503504 ||Y ||Y ||Y || || ||AEL: Low Power Coil Driver D1503506 ||Y ||Y ||Y || || ||AEL: LVDT Driver Chassis D1402826 ||Y ||Y ||Y || || ||AEL: LVDT/ACT Distributor D1402124 ||Y ||Y ||Y || || ||AEL: OL QPD Amp D1402411 ||Y ||Y ||Y || || ||AEL: Sat Amp D1503498 ||Y ||Y ||Y || || ||AEL: Stepper Driver D1600TBD ||Y ||Y ||Y || || ||AEL: Whitening Chassis D1302087 ||Y ||Y ||Y || || ||AEL: Assorted D-Sub cables ||Y ||Y ||Y || || ||AEL: LAN Cable Rack to Rack ||Y ||Y ||Y || || |
||AEL: Rack ||Y! ||Y! ||? ||check with AEL || ||AEL IO Chassis D1201392 ||Y! ||? ||? ||check with AEL || ||AEL: AA Chassis D1100621 ||Y! ||? ||? ||check with AEL || ||AEL: AI Chassis D1101521 ||Y! ||? ||? ||check with AEL || ||AEL: Ethernet Hub ||? ||? ||? ||check with AEL || ||AEL: Geophone Distributor D1402120 ||Y! ||? ||? ||check with AEL || ||AEL: High Power Coil Driver D1503504 ||Y! ||? ||? ||check with AEL || ||AEL: Low Power Coil Driver D1503506 ||Y! ||? ||? ||check with AEL || ||AEL: LVDT Driver Chassis D1402826 ||Y! ||? ||? ||check with AEL || ||AEL: LVDT/ACT Distributor D1402124 ||Y ||? ||? ||check with AEL || ||AEL: OL QPD Amp D1402411 ||? ||? ||? ||for OL; check with Simon, Akutsu-san || ||AEL: Sat Amp D1503498 ||Y! ||? ||? ||check with AEL || ||AEL: Stepper Driver D1600TBD ||? ||? ||? ||check with AEL; we needed to order more because original count was off by 2 || ||AEL: Whitening Chassis D1302087 ||? ||? ||? ||for OL; check with Simon, Akutsu-san || ||AEL: Assorted D-Sub cables ||? ||? ||? || || ||AEL: LAN Cable Rack to Rack ||? ||? ||? || || || || || || || || || || || || || || || || || || || || ||Cleanbooth cleaning ||Y! ||Y! ||Y! || || |
KAGRA VIS - SR Items list
The big table below is best edited in Firefox, because then you can use the "GUI Mode" editor.
- Y! = we have sighted this recently
- Y = we believe we have this but we should double-check
- Y? = we vaguely recall having this but we need to check
- O! = someone ordered this and we have a delivery date
- O = we believe someone ordered this
- O? = someone was asked to order this but we need to check
- N! = we definitely don't have this
- N = we believe we don't have this
- N? = we probably don't have this
- ?? = we have no idea
Item |
Do we have it? |
Notes |
||
|
SR3 |
SR2 |
SRM |
|
|
|
|
|
|
Cleanbooth second floor work |
O |
O |
N |
|
Connect tank top |
?? |
N |
N |
need to check with Saito-sensei |
Add LBB |
O! |
O! |
O! |
SR3 scheduled for 2017/10/18-20 |
Assembly frame #2 |
Y! |
Y |
Y |
|
Assembly frame construction |
Y! |
Y! |
N |
Have SR3 and SR2; will need to move one to SRM eventually. |
Feedthrough Adapter Parts (DSub9 M&F) |
N? |
N? |
N? |
Type Bp used up the supply |
Feedthroughs |
Y |
Y |
Y? |
check with Takahashi-san |
PI (with MW, IP LVDTs, IP steppers fitted) |
Y! |
Y! |
Y? |
2 in center; Sato-san will do third. |
F0 yaw mechanism |
? |
? |
? |
probably have but needs redesign -> Fabian |
Geophones |
O? |
O? |
O? |
Takahashi-san was going to order these FY 20170224 |
Geophone pods |
Y |
Y |
Y |
|
Geophone preamps |
O? |
O? |
O? |
Takahashi-san says can get from Nikhef 20170224 |
Geophone adapters (in-vac) |
O |
O |
O |
check with Sato-san |
Arc weights |
N |
N |
N |
|
PI-Flange Cables(Type 1, Type 3; F-F) |
O |
O |
O |
check Sato-san's spreadsheet |
Cable Clamps on PI Blade Spring Bases |
N! |
N! |
N! |
Hirata-san to design |
Cable Clamps on Top Filter |
? |
? |
? |
|
Cable Clamps on Rods |
? |
? |
? |
|
Collets for Cable Clamps on Rods |
? |
? |
? |
|
LBB blades |
N |
N |
N |
need to modify design: rings lighter (same as BS), LBB heavier (not cut) |
LBB blade bases |
N |
N |
N |
need to order |
LBB Rods (including nailheads etc) |
O! |
O! |
O! |
|
LBB Rod Receptacles |
N |
N |
N |
|
LBB Damper Rings |
N |
N |
N |
|
Maraging rods |
Y |
Y |
Y |
|
Magnets (10x10x10 for SF, LBB) |
Y? |
Y? |
Y? |
need to count |
Magic Wand for SF |
Y! |
Y! |
Y! |
|
Magic Wand for F0 |
? |
? |
? |
check with Sato-san |
Fishing Rod for SF, BF |
Y! |
Y! |
Y! |
Hirata-san installed |
Fishing Rod for F0 |
? |
? |
? |
check with Sato-san |
Fishing Rods for PI |
? |
? |
? |
check with Sato-san |
Security Structure (SS) |
Y |
Y |
Y |
in center area; need to do stocktake |
SF Damper Ring |
Y |
Y |
Y |
|
SF |
Y! |
Y! |
Y! |
|
Cable Clamps on SF |
N |
N |
N |
|
SF-PI Cables(Type 2, Type 4) |
O? |
O? |
O? |
check Sato-san's spreadsheet |
BF |
Y! |
Y! |
Y! |
|
Cable clamps on BF |
N |
N |
N |
|
BF-PI Cables (Type 2, Type 4) |
O? |
O? |
O? |
check Sato-san's spreadsheet |
IRM parts |
Y |
N |
N |
|
IRM lock screws |
N |
N |
N |
|
IRM OSEMs |
N |
N |
N |
Need to give need dates to Akutsu-san ASAP |
IM parts |
Y |
N |
N |
|
Cable Clamps on IM |
Y |
Y |
Y |
|
Flags on IM |
N |
N |
N |
|
IM Wire Clamp Mods |
N |
N |
N |
waiting second quote |
Ballast/trim masses for IM |
? |
? |
? |
|
IM Flags |
N |
N |
N |
ordered by Shoda-san; need to stocktake |
IM Flag Magnets(10xØ10) |
? |
? |
? |
|
IM-BF Cables (Type 5-1.7, pico) |
O? |
O? |
O? |
check Sato-san's spreadsheet |
Wires |
N |
N |
N |
(easy to order; hard to clean) |
Safety Bar |
Y |
N |
N |
recycle from PR? |
RM |
Y |
? |
? |
ask Takahashi-san |
EQ Stop Screws |
Y |
Y |
Y |
for RM to optic |
RM OSEMs |
O |
N |
N |
Aso-san |
Real SR2, SR3 |
O! |
O |
O |
SR3 expected ≈2017-11-27 |
Sapphire Primary Prisms |
Y |
O? |
O? |
have 2; 8 more were to be ordered 20161209 |
Secondary Prisms |
N |
N |
N |
|
Optic Magnet Standoffs |
O? |
O? |
O? |
Aso-san |
Optic Magnets |
N |
N |
N |
Aso-san |
Magnet gluing jigs |
Y |
Aso-san |
||
Mirror Box |
Y |
Y |
Y |
use PRx mirror box; need to find, especially custom feet |
RM-BF Cables (Type 5-2.2) |
O |
O |
O |
check Sato-san's spreadsheet |
|
|
|
|
|
Fasteners |
1/2 |
N |
N |
|
Pico Driver |
? |
N |
N |
we needed to order more because original count off by 2 |
Picomotors |
Y |
Y |
? |
|
Stepper Motors |
Y |
Y |
? |
|
Signal Generator (or NIKHEF Card) |
? |
? |
? |
Use PR3 one for now |
AEL: Rack |
Y! |
Y! |
? |
check with AEL |
AEL IO Chassis D1201392 |
Y! |
? |
? |
check with AEL |
AEL: AA Chassis D1100621 |
Y! |
? |
? |
check with AEL |
AEL: AI Chassis D1101521 |
Y! |
? |
? |
check with AEL |
AEL: Ethernet Hub |
? |
? |
? |
check with AEL |
AEL: Geophone Distributor D1402120 |
Y! |
? |
? |
check with AEL |
AEL: High Power Coil Driver D1503504 |
Y! |
? |
? |
check with AEL |
AEL: Low Power Coil Driver D1503506 |
Y! |
? |
? |
check with AEL |
AEL: LVDT Driver Chassis D1402826 |
Y! |
? |
? |
check with AEL |
AEL: LVDT/ACT Distributor D1402124 |
Y |
? |
? |
check with AEL |
AEL: OL QPD Amp D1402411 |
? |
? |
? |
for OL; check with Simon, Akutsu-san |
AEL: Sat Amp D1503498 |
Y! |
? |
? |
check with AEL |
AEL: Stepper Driver D1600TBD |
? |
? |
? |
check with AEL; we needed to order more because original count was off by 2 |
AEL: Whitening Chassis D1302087 |
? |
? |
? |
for OL; check with Simon, Akutsu-san |
AEL: Assorted D-Sub cables |
? |
? |
? |
|
AEL: LAN Cable Rack to Rack |
? |
? |
? |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleanbooth cleaning |
Y! |
Y! |
Y! |
|