Differences between revisions 7 and 8
Revision 7 as of 2019-04-26 15:19:34
Size: 5585
Editor: YoichiAso
Comment:
Revision 8 as of 2019-04-26 15:24:19
Size: 5597
Editor: YoichiAso
Comment:
Deletions are marked like this. Additions are marked like this.
Line 75: Line 75:
 * Incidents:  * Incidents: no incident

Agenda/Minutes of the VIS Meeting on 2019/4/26

2019/4/26 13:30 - 15:10

Zoom Meeting

Participants: Takahashi, Mark, Terrence, Aso, Okutomi, Hirata, Fujii, Tsuchiya, Ishizaki, Sato, Shoda, Tanaka

Progress report

Schedule Chart

Site work schedule: [[|XLSX]]

Type-A : (PDF/MPP)

Type-B: (PDF/MPP)

Type-C: (XLSX)

Type-A (Takahashi)

Past week report

[Y-front]

  • Set up the ACC drivers again. They are working, but S/N of H3 is not good. The spectrum of displacement sensor in free running showed the resonant peek at 0.4Hz for H1 and H2, but at 1.7Hz for H3.

[X-end]

  • Diagonalization for the horizontal BF damper was broken. LVDT signals of H1 and H2 seem to be flipped. Any problems were not found around the electric rack and the cross tube.

Plan for coming weeks

Type B (Mark)

Report for the week of 4/15

  • Fabian debugged a dead stepper on SR3 (broken driver channel) and a dead geophone on SRM (unplugged cable). He made another update to the table used by the Python script for the stepper driver MEDM screen to reflect the remapping.
  • Fabian monitored the pumpdown and he and Hirata-san did post-pumpdown checks of all the suspensions. They were all healthy.
  • Hirata-san participated in the health checks and learned about the computer systems.
  • Mark did major revisions to the MEDM menu on the OVERVIEW screen with scripts for making safe.snap files and snapshots of setpoints. He made the safe.snap files in directories under /opt/rtcds/kamioka/k1/target into symbolic links to files in /opt/rtcds/userapps/release/vis/k1/burtfiles, alongside the setpoint files, so that they could be backed up to the SVN (as at LIGO).

  • Mark did major updates to his vistools.py Python package for manipulating the suspensions (based on his LIGO sustools.py). He added entries for Type B suspensions to the internal database and added commands for manipulating SET and DCCTRL blocks. He also added commands to simulate pressing on the CLEAR HISTORY and LOAD COEFFICIENTS buttons.

  • Mark started updating the TYPEB.py Guardian definition file to use vistools.py. So far only the ENGAGING_IP_CONTROL state has been fully rewritten and tested, but other states will be simple adaptations. It should be easy to do Type A and other Guardians in the same style.

Report for the week of 4/22

  • Fabian debugged an anomaly he found in the SRM (klog 8672) and found it was OK if the BF was high enough (klog 8733).
  • Mark and Terrence worked on improvements to the Guardian and the vistools.py package.
    • We debugged a problem where vistools.py triggered channel access timeouts when a Vis object was created in a live Guardian (it worked fine in a plain iPython session or the interactive mode of the Guardian). It turns out that in the live mode of the Guardian, the Ezca instance used for accessing the suspension is not a global variable (contrary to the documentation) but is associated with the GuardState class. Worse, creating a second Ezca instance upsets things. We came up with a workaround to grab and reuse the Ezca object already defined.

    • Mark added many new functions to vistools.py, including one to read the BIO WD status, and a group to manipulate the OLSET and OLDCCTRL filter blocks.
    • Terrence rewrote the TYPEB.py Guardian from scratch in terms of functions from vistools.py.
    • We removed the RESET state.
    • We renamed the DCCTRL_ONLY state to FLOAT and reimplemented it to switch the DCCTRL INPUT switches off (instead of the HOLD switches on).
    • We revised the OL_DAMPING_ENGAGED and neighboring states (ALIGN, MISALIGN etc).
    • We changed the RTMs to remove the TM_OSEM_DAMP blocks and to have the SET blocks connect only to the DCCTRL blocks (not the DAMP blocks).
    • We updated the PAYLOAD and OVERVIEW screens to reflect the RTM changes. We also fixed some broken links and fields related to the BIO functions.

Plan for week of 4/29

  • Glorious 10-day break!

Vacation/Travel Info

  • Terrence's next visit from 4/18 to 7/27.
  • Fabian's vacation 4/25 to 5/10.
  • Mark's US vacation from 5/22 to 6/11.
  • Mark's final day 6/28.

Type-Bp (Shoda)

Past week report

  • PR3 IM has large actuation couplings
    • Okutomi is working on the diagonalization

Plan for coming weeks

OMMT & OSTM

Past week report

Plan for coming weeks

VIS electronics (Tanaka)

Past week report

Plan for coming weeks

Other site works

Safety

  • Incidents: no incident
  • Foreseen risks
    • Type-A:
    • Type-B:

Discussion

Travel Plans

  • Travel (Week of 5/6):
    • Takahashi:
    • Sato:
    • Mark: 7-10
    • Hirata:
    • Shoda:
    • Fujii: 8-10
    • Tanioka:
    • Tanaka:
    • Terrence:
  • Travel (Week of 5/13):
    • Takahashi:
    • Sato:
    • Mark: 13-16
    • Hirata:
    • Shoda:
    • Fujii: 14-17
    • Tanioka:
    • Tanaka:
    • Terrence:

Next meeting

On 2019/5/17(Fri)

KAGRA/Subgroups/VIS/VISMinutes20190426 (last edited 2019-04-26 15:24:19 by YoichiAso)