Differences between revisions 1 and 4 (spanning 3 versions)
Revision 1 as of 2021-03-26 09:53:36
Size: 565
Comment:
Revision 4 as of 2021-04-08 14:48:20
Size: 1645
Comment:
Deletions are marked like this. Additions are marked like this.
Line 19: Line 19:
 * Other recent topics   * Are we going to remove ISS setup at IMMT1T?
  * Any upgrades necessary for IMC ASC?
  * Can we automate the beam centering with Tcams for reproducibility?
  * Any thoughts on why PRMI alignment has to be done before Yarm alignment?
  * Are there better ways for daily alignment?
  * What are the steps necessary for engaging WFS/QPD loops in O4?
 * Other recent topics related to ISC
  * Non-polarized beam splitter
  * In-vac steering mirrors: https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=12592
   * For some steering mirrors, p-pol beam
    * STM1, STM2, POM1, POM2 around IFI (PYD-20 is used)
    * steering mirrors after OFI
    * PYD-20 has a transmission
     * T < 70ppm at 0 deg for s-pol (measured)
     * T < 25ppm at 30 deg for s-pol (measured)
     * T < 5ppm at 45 deg for s-pol (measured)
     * T ~ 1000pppm at 45 deg for p-pol (specsheet)
    * Also, specs of POP_POM and POS_POM for IR p-pol needs to be investigated
  * Optical table cover for TRX/TRY and IMC REFL/IMC TRANS: [[KAGRA/subgroup/ifo/MIF/Minutes20210412|Review page]]

ISC Meeting on 2020/04/13 13:00 - 15:00

Participants:

Zoom meeting: https://zoom.us/j/6676627462

Your time zone: https://www.timeanddate.com/worldclock/fixedtime.html?iso=20210413T0400

Next meeting

TBD

back to Meetings page

Minutes

Agenda

  • Summary of interferometer alignment in O3GK and RSE commissioning JGW-T2112594 (Michimura)

  • Discussion on how to proceed for O4
    • Are we going to remove ISS setup at IMMT1T?
    • Any upgrades necessary for IMC ASC?
    • Can we automate the beam centering with Tcams for reproducibility?
    • Any thoughts on why PRMI alignment has to be done before Yarm alignment?
    • Are there better ways for daily alignment?
    • What are the steps necessary for engaging WFS/QPD loops in O4?
  • Other recent topics related to ISC
    • Non-polarized beam splitter
    • In-vac steering mirrors: https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=12592

      • For some steering mirrors, p-pol beam
        • STM1, STM2, POM1, POM2 around IFI (PYD-20 is used)
        • steering mirrors after OFI
        • PYD-20 has a transmission
          • T < 70ppm at 0 deg for s-pol (measured)

          • T < 25ppm at 30 deg for s-pol (measured)

          • T < 5ppm at 45 deg for s-pol (measured)

          • T ~ 1000pppm at 45 deg for p-pol (specsheet)
        • Also, specs of POP_POM and POS_POM for IR p-pol needs to be investigated
    • Optical table cover for TRX/TRY and IMC REFL/IMC TRANS: Review page

KAGRA/subgroup/ifo/MIF/Minutes20210413 (last edited 2021-07-13 11:03:45 by YutaMichimura)