Differences between revisions 56 and 103 (spanning 47 versions)
⇤ ← Revision 56 as of 2010-06-08 07:53:28 →
Size: 5277
Editor: DaisukeTatsumi
Comment:
← Revision 103 as of 2010-06-08 11:11:41 → ⇥
Size: 5049
Editor: DaisukeTatsumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 9: Line 9:
||<align="center">'''Parameter'''||<align="center":width="10%">'''LCGT VRSE-D'''<<FootNote([[http://gw.icrr.u-tokyo.ac.jp/JGWwiki/LCGT/subgroup/ifo/BW|Special Working Group Report]].)>>||<align="center":width="10%">'''LCGT VRSE-B''' ||units|| ||<align="center":width="20%">'''Parameter'''||<align="center":width="15%">'''LCGT VRSE-D'''<<FootNote([[http://gw.icrr.u-tokyo.ac.jp/JGWwiki/LCGT/subgroup/ifo/BW|Band-Width Special Working Group]].)>>||<align="center":width="15%">'''LCGT VRSE-B''' ||<align="center":width="5%"> units||
Line 11: Line 11:
||Wave length||1064|| ||nm||
||Initial Laser Power||150|| ||W||
||Injecting Laser Power into IFO||78.48 (in total), 75 (carrier) || ||W||
||Modulation depth|| 0.3 for both || || ||
||RF freq 1|| 11.25 (PM) || ||MHz||
||RF freq 2|| 45.00 (PM) || ||MHz||
||MC1 length|| 13.324109 || ||m||
||MC2 length|| 13.324109 || ||m||
||MC1 FSR|| || ||MHz||
||MC2 FSR|| || ||MHz||
||MC1 Finesse|| || ||MHz||
||MC2 Finesse|| || ||MHz||		 ||Wave length || 1064 || ||nm||
||Initial Laser Power || 150 || ||W||
||Injecting Laser Power into IFO || 78.48 (in total), 75 (carrier) || ||W||
||Modulation depth || 0.3 for both || || ||
||RF freq 1 || 11.25M (PM) || ||Hz||
||RF freq 2 || 45.00M (PM) || ||Hz||
||MC1 length || 13.324109 || ||m||
||MC2 length || B) 13.324109 || ||m||
||MC1 Finesse || X-( TBD || || ||
||MC2 Finesse || X-( TBD || || ||
||<bgcolor="#FFFF00":colspan="4"> '''Parameters of interferometer''' ||
||Arm cavity Finesse || 1550 || || ||
||Arm power gain || X-( 1.1 × 10^4^ || || ||
||Arm power (single arm)<<FootNote(Arm power was defined by sum of both arm powers. It should be a stored power of single arm.)>> || 420.5 || ||kW||
||Arm cavity cut-off frequency || || ||Hz||
||PR gain || 11 || || ||
||PRC power on BS || || ||W||
||PR cavity cut-off frequency || || ||Hz||
||PR-Arm cut-off frequency || || ||Hz||
||SR gain || 11 || || ||
||Signal band || || ||Hz||
||MICH contrast || || || ||
||Other losses in PRC || || || ||
||Other losses in SRC || || || ||
Line 26: Line 38:
||PRM-BS length || 48.2826 || ||m||
||BS-FM X length || 26.665515 || ||m||
||BS-FM Y length || 23.334485 || ||m||
Line 30: Line 39:
||SR cavity length ||           || ||m||
||SRM-BS length || || ||m||
||SRC detuning phase|| 0.05934 = 3.4 degree || 0 ||rad||
||<bgcolor="#FFFF00":colspan="4"> '''Mirror geometries or mechanical properties''' ||		 ||BS-FM length || 25 || ||m||
||SR cavity length || 73.2826 || ||m||
||SRC detuning phase|| 86.5 <:( 3.4 ??? || 90.0 ||degree||
||<bgcolor="#FFFF00":colspan="4"> '''Mirror geometries''' ||
Line 36: Line 45:
||PRM mass || <:( Not defined || ||kg||
||SRM mass || <:( Not defined || ||kg||
||BS mass || <:( Not defined || ||kg||		 ||PRM mass || <:( TBD || ||kg||
||SRM mass || <:( TBD || ||kg||
||BS mass || <:( TBD || ||kg||
Line 42: Line 51:
||FM AR ROC || <:( Not defined || ||m||
||PRM ROC || <:( Not defined || ||m||
||SRM ROC || <:( Not defined || ||m||		 ||FM AR ROC || <:( TBD || ||m||
||PRM ROC || <:( TBD || ||m||
||SRM ROC || <:( TBD || ||m||
Line 47: Line 56:
||EM thickness || 15 || ||cm||
||FM thickness || 15 || ||cm||
||PRM thickness || <:( Not defined || ||cm||
||SRM thickness || <:( Not defined || ||cm||
||BS thickness || <:( Not defined || ||cm||		 ||EM radius/thickness || 25 / 15 || ||cm||
||FM radius/thickness || 25 / 15 || ||cm||
||PRM radius/thickness || <:( TBD || ||cm||
||SRM radius/thickness || <:( TBD || ||cm||
||BS radius/thickness || <:( TBD || ||cm||
Line 56: Line 65:
||SRM Reflectivity || 0.8464 = 0.92^2 || || || ||SRM Reflectivity || 0.8464 = 0.92^2^ || || ||
Line 58: Line 67:
||EM Loss || 45e-6 || || ||
||FM Loss || 45e-6 || || ||
||PRM Loss || 45e-6 || || ||
||SRM Loss || 45e-6 || || ||		 ||HR Coating Loss of EM, FM, PRM and SRM || 45e-6 || || ||
Line 65: Line 71:
||AR Loss         || :-? 1000e-6 || || || ||AR Coating Loss || :-? 1000e-6 || || ||
Line 67: Line 73:
||EM absorption loss (bulk)||20||20|| || ||ppm/cm||
||FM absorption loss (bulk)||20||20|| 20 || 20 ||ppm/cm||
||EM absorption loss (coat)|||||| || ||ppm||
||FM absorption loss (coat)|||||| <1 || <1 ||ppm||
||PRM absorption loss||5||5|| || ||ppm/cm||
||SRM absorption loss||5||5|| || ||ppm/cm||
||BS absorption loss||5||5|| || ||ppm/cm||
||EM bulk Loss||1000||1000|| || ||ppm||
||FM bulk Loss||1000||1000|| || ||ppm||
||PRM bulk Loss||1000||1000|| || ||ppm||
||SRM bulk Loss||1000||1000|| || ||ppm||
||BS bulk Loss||1000||1000|| || ||ppm||		 ||Bulk loss (absorption) (large optics ??? for Sapphire: ???FM, EM) || :-? 20 || || ppm ||
||Bulk loss (absorption) (small optics ??? for Fused Silica: ???) || :-? 2.5 || || ppm ||
Line 80: Line 76:
||Arm cavity FSR||0.05||0.05|| || ||MHz||
||PRC cavity FSR||19.3166||6.7|| || ||MHz||
||Arm cavity Finesse||1250||1548|| 777 || 777 || ||
||Arm power gain||796||987|| || || ||
||Arm power(single)||0.398||0.3859|| 0.202 || 0.202 ||MW||
||PR gain||10||10.63|| 11 || 11 || ||
||PRC power on BS||1000||797.14|| 825 || 825 ||W||
||SR gain||10||14.68|| ? || N/A || ||
||Arm cavity cut-off frequency|| ||16.14|| 31.8 || 31.8 ||Hz||
||PR cavity cut-off frequency|| ||1.209e6|| || ||Hz||
||PR-Arm cut-off frequency|| ||1.189|| 2.3 || 2.3 ||Hz||
||Signal band|| ||236.9|| || ||Hz||
||MICH contrast||0.995||0.995|| || || ||
||Other losses in PRC||Not defined||1e-3|| 0.02/PRG || 0.02/PRG || ||
||Other losses in SRC||Not defined|| || 0.02/SRG || 0.02/SRG || ||
|| || || || || || ||
|| || || || || || ||
||OMC input/output mirror reflectivity||0.8||0.8|| || || ||
||OMC end mirror reflectivity||0.99995||0.99995|| || || ||
||OMC length||0.07||0.07|| || ||m||
||OMC MC FSR||4282||4282|| || ||MHz||
||OMC Finesse||14||14|| || ||MHz||
|| || || || || || ||
||Quantum efficiency || 0.9 || 0.9 ||　||
||Frequency Stabilization band width||10000||10000|| || ||Hz||
||CARM control band width||Not defined||0.1|| || ||Hz||
||DARM control band width||Not defined||1000|| || ||Hz||
||PRC control band width||Not defined||1000|| || ||Hz||
||MICH control band width||Not defined||10|| || ||Hz||
||SRC control band width||Not defined||1000|| || ||Hz||		 ||<bgcolor="#FFFF00":colspan="4"> '''Output Mode Cleaner''' ||
||OMC length || 1.5 || ||m||
||OMC Finesse || 2000 || || ||
||OMC input/output mirror reflectivity || X-( TBD || || ||
||OMC end mirror reflectivity || X-( TBD || || ||
||OMC MC FSR || ??? || ||MHz||
||DC readout phase || 134.7 || 121.8 || degree ||
||<bgcolor="#FFFF00":colspan="4"> '''Control Bandwidth''' ||
||Quantum efficiency || 0.9 || ||　||
||CARM control band width || 30k || ||Hz||
||DARM control band width || 200 || ||Hz||
||PRC control band width || 50 || ||Hz||
||MICH control band width || 50 || ||Hz||
||SRC control band width || 50 || ||Hz||
||Feed-Forward gain || -0.97 (openloop) || 1/(1-0.97) = 30 (closed loop) || ||
Line 115: Line 96:
Length Sensing Scheme Review by Somiya (Japanese) [[attachment:lcgtrse.pdf]]
Line 117: Line 97:
Length Sensing Scheme Review for advLIGO by Somiya [[attachment:AdvLIGO-LSCv4.pdf]]

..Up

Interferometer Parameters

Old parameter sets (before 2010)

(Classical-noise parameters are here)

Parameter

LCGT VRSE-D1

LCGT VRSE-B

units

Laser source

Wave length

1064

nm

Initial Laser Power

150

W

Injecting Laser Power into IFO

78.48 (in total), 75 (carrier)

W

Modulation depth

0.3 for both

RF freq 1

11.25M (PM)

Hz

RF freq 2

45.00M (PM)

Hz

MC1 length

13.324109

m

MC2 length

B) 13.324109

m

MC1 Finesse

X-( TBD

MC2 Finesse

X-( TBD

Parameters of interferometer

Arm cavity Finesse

1550

Arm power gain

X-( 1.1 × 104

Arm power (single arm)2

420.5

kW

Arm cavity cut-off frequency

Hz

PR gain

11

PRC power on BS

W

PR cavity cut-off frequency

Hz

PR-Arm cut-off frequency

Hz

SR gain

11

Signal band

Hz

MICH contrast

Other losses in PRC

Other losses in SRC

Cavity Length

Arm cavity length

3006.69

m

PR cavity length

73.2826

m

Asymmetry length

3.33103

m

BS-FM length

25

m

SR cavity length

73.2826

m

SRC detuning phase

86.5 <:( 3.4 ???

90.0

degree

Mirror geometries

EM mass

30

kg

FM mass

30

kg

PRM mass

<:( TBD

kg

SRM mass

<:( TBD

kg

BS mass

<:( TBD

kg

EM ROC

7113.900

m

FM ROC

7113.900

m

FM AR ROC

<:( TBD

m

PRM ROC

<:( TBD

m

SRM ROC

<:( TBD

m

BS ROC

Infinity

m

EM radius/thickness

25 / 15

cm

FM radius/thickness

25 / 15

cm

PRM radius/thickness

<:( TBD

cm

SRM radius/thickness

<:( TBD

cm

BS radius/thickness

<:( TBD

cm

Mirror optical properties

EM Reflectivity

0.999945

FM Reflectivity

0.996

PRM Reflectivity

0.9

SRM Reflectivity

0.8464 = 0.922

BS Reflectivity

0.5

HR Coating Loss of EM, FM, PRM and SRM

45e-6

BS Loss

100e-6

Transmissivity

1 - R - Loss

AR Transmissivity

0.999

AR Coating Loss

:-? 1000e-6

Bulk loss (absorption) (large optics ??? for Sapphire: ???FM, EM)

:-? 20

ppm

Bulk loss (absorption) (small optics ??? for Fused Silica: ???)

:-? 2.5

ppm

Output Mode Cleaner

OMC length

1.5

m

OMC Finesse

2000

OMC input/output mirror reflectivity

X-( TBD

OMC end mirror reflectivity

X-( TBD

OMC MC FSR

???

MHz

DC readout phase

134.7

121.8

degree

Control Bandwidth

Quantum efficiency

0.9

　

CARM control band width

30k

Hz

DARM control band width

200

Hz

PRC control band width

50

Hz

MICH control band width

50

Hz

SRC control band width

50

Hz

Feed-Forward gain

-0.97 (openloop)

1/(1-0.97) = 30 (closed loop)

To do list to define parameters for 2009

Reference

  1. Band-Width Special Working Group. (1)

  2. Arm power was defined by sum of both arm powers. It should be a stored power of single arm. (2)

LCGT/subgroup/ifo/ISC/IFOParameters (last edited 2011-04-30 00:35:52 by OsamuMiyakawa)