Differences between revisions 1 and 6 (spanning 5 versions)

20180921

Today's activities

Workers: Akutsu, K. Nagano, T. Tanaka, N. Fujii

Repairing some damaged parts
- Replace the damages actuator coils.
Lay cables for TMS and TMS-VIS
- Need to count the required number and length of the cables (on Sept 26??).
Configure the digital models properly.
- Engage the logical channels and the assigned physical channels.
Install geophones.
Install TMS-VIS into the chamber.
Install BRT on it.
Clean the sides of the optics to be installed into the vacuum chamber. (Ethanol+Acetone wiping with vectra alpha, then First Contact.) See here.

KAGRA/Subgroups/AOS/TMSX_O3/2018-09-21 (last edited 2018-09-24 22:01:56 by TomotadaAkutsu)

-  ⇤ ← Revision 1 as of 2018-09-22 17:08:51 → 
  Size: 404
  Editor: KojiNagano
  Comment:
+   ← Revision 6 as of 2018-09-24 22:01:56 → ⇥
  Size: 1117
  Editor: TomotadaAkutsu
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
+ * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=6269]]
-Line 7:
+Line 8:
-[[KAGRA/Subgroups/AOS/TMSX_O3/2018-09-21/PreparationForTMSXOpticInstallation|Preparation For TMSX Optic Installation part2]]
+ * Shown in the above links and the below.
 * [[KAGRA/Subgroups/AOS/TMSX_O3/2018-09-21/PreparationForTMSXOpticInstallation|Preparation For TMSX Optic Installation part2]]
-Line 10:
+Line 12:
+ * Repairing some damaged parts
  * Replace the damages actuator coils.
 * Lay cables for TMS and TMS-VIS
  * Need to count the required number and length of the cables (on Sept 26??).
 * Configure the digital models properly.
  * Engage the logical channels and the assigned physical channels.
 * Install geophones.
 * Install TMS-VIS into the chamber.
 * Install BRT on it.
 * Clean the sides of the optics to be installed into the vacuum chamber. (Ethanol+Acetone wiping with vectra alpha, then First Contact.) See [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9015|here]].