SR3 suspension information
position
FARO measurement
GAS default height (LVDT readout)
- BF GAS LVDTIN:
- F1 GAS LVDTIN:
- F0 GAS LVDTIN:
suspension parameters
resonant frequencies
position of the COM
calculated from the resonant frequencies.
sensor & actuator parameters
Oplev calibration
OSEM calibration
GAS-LVDT calibration
IP-LVDT calibration
Sensor |
Efficiency [um/cnt] |
LVDT H1 |
|
LVDT H2 |
|
LVDT H3 |
|
Geophone calibration
Frequency response
Geophone's frequency response to the ground velocity:
- Ge: Generator constant [V/(m/s)]
- η: Intrinsic damping ratio
- ω0: Resonant angular frequency [rad/s]
Sensor |
S/N |
Generator constant (nominal) [V/(m/s)] |
Damping ratio (estimated) |
Resonant frequency [Hz] |
GEO H1 |
# |
|
|
|
GEO H2 |
# |
|
|
|
GEO H3 |
# |
|
|
|
Noise
Sensor |
Noise [m/rtHz] @ 0.1 Hz |
Noise [m/rtHz] @ 10 Hz |
GEO H1 |
|
|
GEO H2 |
|
|
GEO H3 |
|
|
Calibration
Converted displacement [um] = 3.052 x 10-4 [V/cnt] / HGEO(ω) / (gainPreamp) x (DC cutoff) x 1/s (m/(m/s)) x 106
actuation polarization
TM-srage
COIL |
sign |
TM-H1 |
|
TM-H2 |
|
TM-H3 |
|
TM-H4 |
|
IM-srage
COIL |
sign |
TM-H1 |
|
TM-H2 |
|
TM-H3 |
|
TM-H4 |
|
Diagonalization matrix
- ACC2EUL
H1 |
H2 |
H3 |
To: |
** |
|
|
|
** |
|
|
|
** |
|
|
|
- LVDT2EUL
H1 |
H2 |
H3 |
To: |
|
|
|
Long. |
|
|
|
Trans. |
|
|
|
Yaw |
- EUL2COIL
Long. |
Trans. |
Yaw |
To: |
|
|
|
H1 |
|
|
|
H2 |
|
|
|
H3 |
actuation efficiency
Stepper motor
See also: Stepper motor setup
Epics channel name: K1:STEPPER_***_IP |
|||||
Driver IP address: 10.68.150.** |
|||||
Motor 0 |
Motor 1 |
Motor 2 |
Motor 3 |
Motor 4 |
Motor 5 |
|
|
|
|
<blank> |
<blank> |