Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2018-05-24 22:24:00 →
Size: 678
Editor: TomotadaAkutsu
Comment:
← Revision 2 as of 2018-05-24 23:50:33 → ⇥
Size: 743
Editor: TomotadaAkutsu
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
 * Check the positions and rigidity of the Inoue-tower, and the dirtiness.
 * Check also the Inoue-tower's fixing method; at least IXA it seems need to be re-worked.		  * Check the positions and rigidity of the inner tower, and the dirtiness.
 * Check also fixing method for the inner tower; at least in IXAm it seems re-working is needed.
Line 17: Line 17:
 * Make grooves to be refereneces to locate the NAB finally.  * Make grooves to be references so that we can locate the NAB properly with respect to the interferometer's main beam.

Narrow Angle Baffle

<< <  2018 / 5 >  >>
Mon Tue Wed Thu Fri Sat Sun
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31      

<< <  2018 / 6 >  >>
Mon Tue Wed Thu Fri Sat Sun
        1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30  

Task list

Note: some of the tasks can be done in parallel.

  • Make the clean booth clean and useful; prepare tables, shelves, ethanol, tools...
  • Open the side flanges and top lid; attach white tapes (SPV-202) to the open flanges to protect them.
  • Check the positions and rigidity of the inner tower, and the dirtiness.
  • Check also fixing method for the inner tower; at least in IXAm it seems re-working is needed.
  • Measure several heights and widths
  • Make grooves to be references so that we can locate the NAB properly with respect to the interferometer's main beam.

KAGRA/subgroups/AOS/NarrowAngleBaffles (last edited 2018-06-25 14:32:09 by SimonZeidler)