Differences between revisions 60 and 61

LCGT Auxiliary Optics Subsystem (AOS)

Contents

LCGT Auxiliary Optics Subsystem (AOS)

Objectives

The objectives of the subgroup "Auxiliary Optics System" is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together.

General Description

All the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. Even if the vacuum chamber was not designed for considering the space allocated for AOS, AOS are required for fully operating LCGT, so we should pack them into the vacuum chambers BY ANY MEANS.

References

Aux. opt. list from MIF's point of view	Layout Meeting
Optical Parameters	Parameter Meeting
LCGT SVN	Terminology	Discussion with Rana 2010

Subsystems

Stray Light Control
Transmit Telescopes (transmit IR/Green beams)
Output Faraday Isolaters
Optical Lever
CCD monitors
Viewports on Vacuum Chambers
Initial Alignment Setting
Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)
Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)
Other local sensors/monitors/actuators?
Squeezing system??
Beam Shutter
Any other optics, outside breadboard,...
Micro Roughness of Mirrors

Meetings

LCGT-AOS Meetings

-  ⇤ ← Revision 60 as of 2011-08-25 19:46:08 → 
  Size: 1936
  Editor: TomotadaAkutsu
  Comment:
+   ← Revision 61 as of 2011-08-29 04:18:49 → ⇥
  Size: 2288
  Editor: TomotadaAkutsu
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
+== General Description ==
All the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established.
Even if the vacuum chamber was not designed for considering the space allocated for AOS, AOS are required for fully operating LCGT, so we should pack them into the vacuum chambers '''''BY ANY MEANS'''''.