|
Size: 3135
Comment:
|
Size: 2620
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = LCGT Auxiliary Optics Subsystem (AOS) = | ## page was renamed from LCGT/subgroup/AOS = KAGRA Auxiliary Optics System = |
| Line 6: | Line 8: |
| The objectives of the subgroup "Auxiliary Optics System" (AOS) is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together. | . The objectives of the subgroup ''' "Auxiliary Optics System" (AOS) ''' is to design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the KAGRA interferometer together. |
| Line 9: | Line 11: |
| Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating LCGT, so we shall, by any means, pack them into the vacuum chambers if required. |
. Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. . Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating KAGRA, so we shall, by any means, pack them into the vacuum chambers if required. |
| Line 13: | Line 15: |
| ||[[LCGT/subgroup/ifo/MIF/AuxOpticsLists|Aux. opt. list from MIF's point of view]]||[[LCGT/subgroup/vacuum|Layout Meeting]]|| || ||[[LCGT/subgroup/ifo/MIF/OptParam|Optical Parameters]]||[[LCGT/subgroup/OCG/parametermeeting|Parameter Meeting]]|| || ||[[LCGT/SVN|LCGT SVN]] ||[[LCGT/Terminology|Terminology]]||[[LCGT/iLCGT/Subgroup/DiscussionRana2010 | Discussion with Rana 2010]]|| |
||[[LCGT/subgroup/ifo/MIF/AuxOpticsLists|Auxiliary optics list from MIF's point of view]]|| ||[[KAGRA/Subgroups/VAC|Layout Meeting]]||[[LCGT/subgroup/OCG/parametermeeting|Interface Parameter Meeting]]|| ||[[LCGT/subgroup/ifo/MIF/OptParam|Optical Parameters]]|| ||[[LCGT/SVN|SVN]] || [[KAGRA/Terminology|Terminology]]|| ||[[LCGT/iLCGT/Subgroup/DiscussionRana2010|Discussion with Rana (2010)]]||[[LCGT/Meeting/RoadMap|Roadmap]] || |
| Line 18: | Line 22: |
| === Major subsystems === | |
| Line 19: | Line 24: |
| * <!> Including beam baffles, output Faraday isolators, and calculation of BRDF of test masses... * [[LCGT/subgroup/AOS/BeamReduceTelescope1|Pick-off and transmit telescopes]] |
* [[LCGT/subgroup/AOS/BeamReduceTelescope1|Beam Reducing Telescopes]] * [[LCGT/subgroup/AOS/OptLev1|Optical Lever]] * [[LCGT/subgroup/AOS/CCD1|Imagers and Light Sources ]] including CCD Monitors or equivalent * [[LCGT/subgroup/AOS/Viewport1|Viewports]] at room temperature * [[LCGT/subgroup/AOS/BeamTarget1|Automatic Target System]] * [[LCGT/subgroup/AOS/BeamModeProfiler1|Beam Profilers for large beams]] |
| Line 22: | Line 31: |
| ---- /!\ '''Edit conflict - other version:''' ---- * <!> Auxiliary cavity-locking system (Green laser one) should be considered in MIF or IOO. The effort of system designing should be separated from that of engineering and fabricating from the WBS point of view (or what-you-call system engineering) even if the person assigned to both is the same. |
=== Other subsystems === * Squeezing? Squeezer optics * [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]] * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]] * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators]] LIGO's OSEM-like things utilized in vibration isolation system * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors]] utilized in vibration isolation system or in noise-hunting phase == Meetings == * [[LCGT/subgroup/AOS/Meetings|KAGRA-AOS Meetings]] * [[LCGT/subgroup/AOS/Meeting_Archive|Meeting Archive]] |
| Line 26: | Line 43: |
| ---- /!\ '''Edit conflict - your version:''' ---- | |
| Line 28: | Line 44: |
| ---- /!\ '''End of edit conflict''' ---- * [[LCGT/subgroup/AOS/OptLev1|Optical Lever]] * <!> Optical lever is a kind of local sensors, but unlike other local sensors, it requires long beam lines as lever's arms, thus this should be considerd in AOS. * [[LCGT/subgroup/AOS/CCD1|CCD monitors]] * [[LCGT/subgroup/AOS/Viewport1|Viewports on Vacuum Chambers]] * [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]] * [[LCGT/subgroup/AOS/BeamTarget1|Beam Targets in Arms]] * [[LCGT/subgroup/AOS/BeamModeProfiler1|Beam Mode Profiler]] * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]] * Other local sensors/monitors/actuators? * Any other optics, outside breadboard,... * Squeezing system?? * Maybe mainly VIS group's charge and not AOS's: * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]] * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)]] == Meetings == * [[LCGT/subgroup/AOS/Meetings|LCGT-AOS Meetings]] == Links == |
== Useful Links == |
| Line 50: | Line 46: |
| * [[https://www.advancedligo.mit.edu/aos.html|adv.LIGO Aux. Optics]] | * [[https://www.advancedligo.mit.edu/aos.html|aLIGO Auxiliary Optics]] |
| Line 52: | Line 48: |
| * [[http://gwclio.icrr.u-tokyo.ac.jp/lcgtsubgroup/auxiliary/|KAGRA AOS blog]] |
KAGRA Auxiliary Optics System
Contents
Objectives
The objectives of the subgroup "Auxiliary Optics System" (AOS) is to design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the KAGRA interferometer together.
General Description
- Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established.
- Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating KAGRA, so we shall, by any means, pack them into the vacuum chambers if required.
References
Subsystems
Major subsystems
Imagers and Light Sources including CCD Monitors or equivalent
Viewports at room temperature
Other subsystems
- Squeezing? Squeezer optics
Local Sensors and Actuators LIGO's OSEM-like things utilized in vibration isolation system
Violine mode sensors or Wire position sensors utilized in vibration isolation system or in noise-hunting phase
Meetings