Differences between revisions 148 and 153 (spanning 5 versions)
⇤ ← Revision 148 as of 2012-09-16 18:57:36 →
Size: 3338
Editor: KiwamuIzumi
Comment:
← Revision 153 as of 2012-09-16 20:48:11 → ⇥
Size: 3387
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
= KAGRA Auxiliary Optics System (AOS) = = KAGRA Auxiliary Optics System =
Line 16: Line 16:
 ||<#FF8080> ''''' Descriptions ''''' ||<#FF8080> ''''' Links '''''||  ||<#80FF80> ''''' Descriptions ''''' ||<#80FF80> ''''' Links '''''||
Line 38: Line 38:
 * Any other optics, outside breadboard,...
  * Squeezing system??

 * Highly Related Subsystems (not included in AOS)
  * [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]](IOO, MIF)
  * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]](MIF)
  * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]](VIS)
  * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)]](VIS?)		  ||<#FF8080> ''''' Subsystems ''''' ||<#FF8080> ''''' Responsible Subgroups '''''||<#FF8080> ''''' Notes ''''' ||
 ||Squeezing? || ||Squeezer optics ||
 || [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]]|| IOO, MIF || ||
 || [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]] || MIF || ||
 || [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators]] || VIS || LIGO's OSEM-like things utilized in vibration isolation system||
 || [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors]] || VIS?||utilized in vibration isolation system or in noise-hunting phase||
Line 48: Line 46:
 * [[LCGT/subgroup/AOS/Meetings|LCGT-AOS Meetings]]  * [[LCGT/subgroup/AOS/Meetings|KAGRA-AOS Meetings]]
Line 54: Line 52:
 ||<#FF8080> ''''' Descriptions ''''' ||<#FF8080> ''''' Links '''''||  ||<#8080FF> ''''' Descriptions ''''' ||<#8080FF> ''''' Links '''''||

KAGRA Auxiliary Optics System

AOStitle.png

Contents

  1. KAGRA Auxiliary Optics System
    1. Objectives
    2. General Description
    3. References
    4. Subsystems
    5. Meetings
    6. Useful Links

Objectives

  • The objectives of the subgroup "Auxiliary Optics System" (AOS) is to design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the KAGRA interferometer together.

General Description

  • Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established.
  • Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating KAGRA, so we shall, by any means, pack them into the vacuum chambers if required.

References

Subsystems

Major subsystems

Other subsystems

Meetings

KAGRA/Subgroups/AOS (last edited 2019-04-11 15:18:56 by TomotadaAkutsu)