Differences between revisions 53 and 109 (spanning 56 versions)

LCGT Auxiliary Optics System (AOS)

Contents

LCGT Auxiliary Optics System (AOS)

Objectives

The objectives of the subgroup "Auxiliary Optics System" (AOS) is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together.

General Description

Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating LCGT, so we shall, by any means, pack them into the vacuum chambers if required.

References

Aux. opt. list from MIF's point of view	Layout Meeting
Optical Parameters	Parameter Meeting
LCGT SVN	Terminology	Discussion with Rana 2010

Subsystems

Stray Light Control
- Including beam baffles, output Faraday isolators, and calculation of BRDF of test masses...
Beam Reducing Telescopes
Optical Lever
- Optical lever is a kind of local sensors, but unlike other local sensors, it requires long beam lines as lever's arms, thus this should be considerd in AOS.
Viewable Monitors
Viewports on Vacuum Chambers
Automatic Target System
Beam Mode Profiler
Other local sensors/monitors/actuators?
Any other optics, outside breadboard,...
Squeezing system??
Highly related subsystems
- Beam Shutters(IOO, MIF)
- Initial Alignment(MIF)
Maybe mainly VIS group's charge and not AOS's:
- Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)
- Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)

Meetings

LCGT-AOS Meetings

-  ⇤ ← Revision 53 as of 2011-08-25 16:25:19 → 
  Size: 1775
  Editor: TomotadaAkutsu
  Comment:
+   ← Revision 109 as of 2012-02-10 14:35:46 → ⇥
  Size: 2724
  Editor: TomotadaAkutsu
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-= LCGT Auxiliary Optics Subsystem (AOS) =
+= LCGT Auxiliary Optics System (AOS) =
 Line 6:
-The objectives of the subgroup "Auxiliary Optics System" is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together.
+The objectives of the subgroup "Auxiliary Optics System" (AOS) is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together.

== General Description ==
Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established.
Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating LCGT, so we shall, by any means, pack them into the vacuum chambers if required.
-Line 9:
+Line 13:
-||[[LCGT/subgroup/ifo/MIF/AuxOpticsLists|Aux. opt. list from MIF's point of view]]||[[LCGT/subgroup/vacuum|Layout Meeting]]||
||[[LCGT/subgroup/ifo/MIF/OptParam|Optical Parameters]]||[[LCGT/subgroup/OCG/parametermeeting|Parameter Meeting]]||
||[[LCGT/SVN|LCGT SVN]] ||[[LCGT/Terminology|Terminology]]||
+||[[LCGT/subgroup/ifo/MIF/AuxOpticsLists|Aux. opt. list from MIF's point of view]]||[[LCGT/subgroup/vacuum|Layout Meeting]]|| ||
||[[LCGT/subgroup/ifo/MIF/OptParam|Optical Parameters]]||[[LCGT/subgroup/OCG/parametermeeting|Parameter Meeting]]|| ||
||[[LCGT/SVN|LCGT SVN]] ||[[LCGT/Terminology|Terminology]]||[[LCGT/iLCGT/Subgroup/DiscussionRana2010 | Discussion with Rana 2010]]||
-Line 16:
+Line 19:
- * [[LCGT/subgroup/AOS/BeamReduceTelescope1|Transmit Telescopes (transmit IR/Green beams)]]
 * [[LCGT/subgroup/AOS/StrayLight2|Output Faraday Isolaters]]
+  * <!> Including beam baffles, output Faraday isolators, and calculation of BRDF of test masses...
 * [[LCGT/subgroup/AOS/BeamReduceTelescope1|Beam Reducing Telescopes]]
-Line 19:
+Line 22:
- * [[LCGT/subgroup/AOS/CCD1|CCD monitors]]
+  * <!> Optical lever is a kind of local sensors, but unlike other local sensors, it requires long beam lines as lever's arms, thus this should be considerd in AOS. 
 * [[LCGT/subgroup/AOS/CCD1|Viewable Monitors]]
-Line 21:
+Line 25:
- * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment Setting]]
 * [[LCGT/subgroup/AOS/JBOSESM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]]
 * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system)]]
+ * [[LCGT/subgroup/AOS/BeamTarget1|Automatic Target System]]
 * [[LCGT/subgroup/AOS/BeamModeProfiler1|Beam Mode Profiler]]
-Line 25:
+Line 28:
- * Squeezing sistem??
 * [[LCGT/subgroup/AOS/Shutter1|Beam Shutter]]
 * [[LCGT/subgroup/AOS/Optics1|Any other optics, outside breadboard,... ]]
 * [[LCGT/subgroup/AOS/Mirror1|Micro Roughness of Mirrors]]
+ * Any other optics, outside breadboard,...
 * Squeezing system??
 * Highly related subsystems
  * [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]](IOO, MIF)
  * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]](MIF)
 * Maybe mainly VIS group's charge and not AOS's:
  * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]]
  * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)]]
-Line 35:
+Line 42:
+ * [[https://dcc.ligo.org/|LIGO Document Control Center]]
-Line 36:
+Line 44:
+ * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/LCGT/subgroup/howtojoin|How to join Mailing Lists for LCGT project]]