Size: 2819
Comment:
|
Size: 2722
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
= LCGT Auxiliary Optics Subsystem (AOS) = | ## page was renamed from LCGT/subgroup/AOS = KAGRA Auxiliary Optics System (AOS) = {{attachment:AOStitle.png}} |
Line 6: | Line 9: |
The objectives of the subgroup "Auxiliary Optics System" (AOS) is to have the other LCGT subgroups design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the LCGT interferometer together. | . The objectives of the subgroup ''' "Auxiliary Optics System" (AOS) ''' is to design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the KAGRA interferometer together. |
Line 9: | Line 12: |
All the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating LCGT, so we shall, by any means, pack them into the vacuum chambers if required. |
. Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established. . Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating KAGRA, so we shall, by any means, pack them into the vacuum chambers if required. |
Line 13: | Line 16: |
||[[LCGT/subgroup/ifo/MIF/AuxOpticsLists|Aux. opt. list from MIF's point of view]]||[[LCGT/subgroup/vacuum|Layout Meeting]]|| || ||[[LCGT/subgroup/ifo/MIF/OptParam|Optical Parameters]]||[[LCGT/subgroup/OCG/parametermeeting|Parameter Meeting]]|| || ||[[LCGT/SVN|LCGT SVN]] ||[[LCGT/Terminology|Terminology]]||[[LCGT/iLCGT/Subgroup/DiscussionRana2010 | Discussion with Rana 2010]]|| |
|| ''''' Descriptions ''''' || ''''' Links '''''|| || Auxiliary optics list from MIF's point of view || [[LCGT/subgroup/ifo/MIF/AuxOpticsLists]]|| || Layout Meeting || [[KAGRA/Subgroups/VAC ]]|| || Optical Parameters || [[LCGT/subgroup/ifo/MIF/OptParam]]|| || Interface Parameter Meeting || [[LCGT/subgroup/OCG/parametermeeting]]|| ||SVN (version control system) ||[[LCGT/SVN]] || || Terminology || [[KAGRA/Terminology]]|| || Discussion with Rana (2010) || [[LCGT/iLCGT/Subgroup/DiscussionRana2010]]|| ||Roadmap || [[LCGT/Meeting/RoadMap]] || |
Line 19: | Line 28: |
* <!> Including beam baffles, output Faraday isolators, and calculation of BRDF of test masses... * [[LCGT/subgroup/AOS/BeamReduceTelescope1|IR Pick-off and transmit telescopes]] * [[LCGT/subgroup/AOS/BeamReduceTelescope2|Green Transmit Telescopes]] * <!> Auxiliary laser-locking system itself should be considered in MIF or IOO. The effort of system designing should be separated from that of engineering design and fabrication from the WBS point of view (or what-you-call system engineering) even if the person assigned to both is the same. |
* [[LCGT/subgroup/AOS/BeamReduceTelescope1|Beam Reducing Telescopes]] * [[LCGT/subgroup/AOS/OptLev1|Optical Lever]] * [[LCGT/subgroup/AOS/CCD1|Imagers and Light Sources (CCD Monitors or equivalent)]] * [[LCGT/subgroup/AOS/Viewport1|Viewports]] * [[LCGT/subgroup/AOS/BeamTarget1|Automatic Target System]] * [[LCGT/subgroup/AOS/BeamModeProfiler1|Beam Profilers for large beams]] |
Line 24: | Line 35: |
* [[LCGT/subgroup/AOS/OptLev1|Optical Lever]] * <!> Optical lever is a kind of local sensors, but unlike other local sensors, it requires long beam lines as lever's arms, thus this should be considerd in AOS. * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment System]] * [[LCGT/subgroup/AOS/CCD1|CCD monitors]] * [[LCGT/subgroup/AOS/Viewport1|Viewports on Vacuum Chambers]] * [[LCGT/subgroup/AOS/Shutter1|Beam Shutter]] * Other local sensors/monitors/actuators? |
|
Line 32: | Line 36: |
* Squeezing system?? * Maybe mainly VIS group's charge and not AOS's: * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]] * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)]] |
* Squeezing system?? * Highly Related Subsystems (not included in AOS) * [[LCGT/subgroup/AOS/Shutter1|Beam Shutters]](IOO, MIF) * [[LCGT/subgroup/AOS/InitialAlign1|Initial Alignment]](MIF) * [[LCGT/subgroup/AOS/JBOSEM1|Local Sensors and Actuators (LIGO's OSEM-like things utilized in vibration isolation system)]](VIS) * [[LCGT/subgroup/AOS/Violine1|Violine mode sensors or Wire position sensors (utilized in vibration isolation system or in noise-hunting phase)]](VIS?) |
Line 39: | Line 46: |
* [[LCGT/subgroup/AOS/Meeting_Archive|Meeting Archive]] |
|
Line 44: | Line 53: |
* [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/LCGT/subgroup/howtojoin|How to join Mailing Lists for LCGT project]] |
KAGRA Auxiliary Optics System (AOS)
Contents
Objectives
The objectives of the subgroup "Auxiliary Optics System" (AOS) is to design and complete the auxiliary optics that physically, logically and consistently glue the main parts of the KAGRA interferometer together.
General Description
- Most of the AOS shall be fit to the vacuum chambers that had been already determined when the AOS group was established.
- Even if the vacuum chamber was not designed considering the space allocated for AOS, AOS are required for fully operating KAGRA, so we shall, by any means, pack them into the vacuum chambers if required.
References
Descriptions |
Links |
Auxiliary optics list from MIF's point of view |
|
Layout Meeting |
|
Optical Parameters |
|
Interface Parameter Meeting |
|
SVN (version control system) |
|
Terminology |
|
Discussion with Rana (2010) |
|
Roadmap |
Subsystems
- Any other optics, outside breadboard,...
- Squeezing system??
- Highly Related Subsystems (not included in AOS)
Meetings