Differences between revisions 26 and 61 (spanning 35 versions)

Transmission Monitor's Vibration Isolation Stage for X: preparation (TMS-VISX)

With a fixed stage.
TMS = BRT (beam reducing telescope) + GPT (Gouy phase telescope)

Links to knowledge

LVDTs

Be careful! The pin assignment in the Dsub shell or the signal phases would be different from the below for #1 and #2, as I needed to once detach the pins when I installed the LVDTs (Akutsu).

Coil inspection report (JGW-T1808464)
http://klog.icrr.u-tokyo.ac.jp/osl/?r=5046: note: LVDT1's coil wires were broken.
http://klog.icrr.u-tokyo.ac.jp/osl/?r=5022
http://klog.icrr.u-tokyo.ac.jp/osl/?r=5106: note: LVDT6's coil wires were broken.

Polarity & Calibration Factor

V: postive means that the LVDT outputs positive counts when TMS-VIS moves upward, and so the calibration factors are set.
H: postive means that the LVDT outputs positive counts when TMS-VIS moves positive yaw (counter clock wise from top view), and so the calibration factors are set.

Sensor	Serial#	polarity	calibration factor
LVDT V1		negative	-0.149 [um/cnt]
LVDT V2		positive	0.138 [um/cnt]
LVDT V3		negative	-0.135 [um/cnt]
LVDT H1		positive	0.154 [um/cnt]
LVDT H2		positive	0.146 [um/cnt]
LVDT H3		positive	0.150 [um/cnt]

Actuator coils

Be careful! The pin assignment in the Dsub shell or the signal phases would be different from the below, as I needed to once detach the pins when I installed the coils (Akutsu).

Polarity & Calibration Factor

V: postive means upward (TMS-VIS moves in upward by inputting positive value to the act coils from MEDM)
H: positive means plus yaw (TMS-VIS moves in counter clock wise from top view by inputting positive value to the act coils from MEDM)

Actuator	polarity	Serial#
COIL V1	positive
COIL V2	positive
COIL V3	positive
COIL H1	negative (obsolete) ->
COIL H2	positive (obsolete)->
COIL H3	positive (obsolete) ->

Geophones

Serical# of L-4C	Vert/Horiz	Naming of the assembled unit	Assembler
404080975	Vert
404080976	Vert	TMS-VISX: Geo-V2	Akutsu
404080977	Vert
404080978	Vert
404084240	Vert
404084241	Vert	TMS-VISX: Geo-V3	Akutsu
404084242	Vert	TMS-VISX: Geo-V1	Fujii -> Akutsu
2	Horiz	TMS-VISX: Geo-H3	Akutsu -> Uraguchi
3	Horiz
4	Horiz	TMS-VISX: Geo-H1	Akutsu
5	Horiz	TMS-VISX: Geo-H2	Akutsu
15	Horiz
16	Horiz
17	Horiz

Cabling

LVDT/Act - (coil wires) - Dsub9M - (Dsub9F - PTFE 2m - Dsub9F) - Dsub9M flange - Flipper cable - Dsub Cable
Geophone - (MIL C 26482 - PTFE 0.5m - Dsub9M) - (Dsub9F - 1.5m PTFE - Dsub9F) - Dsub9M flange - Flipper cable - Dsub Cable
PTFE cables

Task list

Note: some of the tasks can be done in parallel.

Signal Assign

Pin Name

Resistance

Equipment

Assign

Comment1

Comment2

Connection

-  ⇤ ← Revision 26 as of 2018-07-06 18:44:25 → 
  Size: 2553
  Editor: TomotadaAkutsu
  Comment:
+   ← Revision 61 as of 2018-10-16 14:55:04 → ⇥
  Size: 5780
  Editor: TomotadaAkutsu
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-= Transmission Monitor's Vibration Isolation Stage: preparation (TMS-VIS) =
+= Transmission Monitor's Vibration Isolation Stage for X: preparation (TMS-VISX) =
 Line 4:
-||<<MonthCalendar(,2018,5)>>||<<MonthCalendar(,2018,6)>>||
+||<<MonthCalendar(,2018,6)>>||<<MonthCalendar(,2018,7)>>||<<MonthCalendar(,2018,8)>>||||<<MonthCalendar(,2018,9)>>||
 Line 8:
- * https://gwpo.nao.ac.jp/wiki/ATCstandalone
+ * [[https://gwpo.nao.ac.jp/wiki/ATCstandalone|Standalone Machine in ATC]]
 * '''Mechanical design''': [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=6336|Mechanical design of TMS Vibration Isolation Stage (by Uraguchi-san)]]
 * '''Ref''': [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=6260| design of blade spring for TMS VIS stage (in Japanese) (by Uraguchi-san)]]
 * '''Ref''': [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=5752| mechanical model of TMS VIS (in Japanese) (by Uraguchi-san)]]
 * '''Ref''': [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8502|TMS VIS coordinate (in Japanese) (by Uraguchi-san)]]
-Line 11:
+Line 15:
+ * Memo: [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8480]]
 * note: [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8508]]
 * メモ: [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/subgroup/AOS/TMS-VIS0/2018-09-12]]
-Line 15:
+Line 22:
- * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8464|The coil performances]]
+ * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8464|Coil inspection report (JGW-T1808464)]]
-Line 20:
+Line 27:
+=== Polarity & Calibration Factor ===
 * V: postive means that the LVDT outputs positive counts when TMS-VIS moves upward, and so the calibration factors are set.
 * H: postive means that the LVDT outputs positive counts when TMS-VIS moves positive yaw (counter clock wise from top view), and so the calibration factors are set.
||'''Sensor'''|| Serial#|| polarity || calibration factor ||
|| LVDT V1 || || negative ||-0.149 [um/cnt] ||
|| LVDT V2 || ||positive || 0.138 [um/cnt] ||
|| LVDT V3 || ||negative ||-0.135 [um/cnt] ||
|| LVDT H1 || ||positive || 0.154 [um/cnt] ||
|| LVDT H2 || ||positive || 0.146 [um/cnt] ||
|| LVDT H3 || ||positive || 0.150 [um/cnt] ||
-Line 22:
+Line 42:
+ * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8465|Coil inspection report (JGW-T1808465)]]
-Line 33:
+Line 54:
+=== Polarity & Calibration Factor ===
 * V: postive means upward (TMS-VIS moves in upward by inputting positive value to the act coils from MEDM)
 * H: positive means plus yaw (TMS-VIS moves in counter clock wise from top view by inputting positive value to the act coils from MEDM)
||'''Actuator'''|| polarity ||Serial#||
|| COIL V1 || positive || ||
|| COIL V2 || positive || ||
|| COIL V3 || positive || ||
|| COIL H1 || negative (obsolete) ->  || ||
|| COIL H2 || positive (obsolete)-> || ||
|| COIL H3 || positive (obsolete) -> || ||
-Line 34:
+Line 68:
+ * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8466|Data sheets of the geophones (JGW-T1808466)]]
-Line 35:
+Line 70:
+|| Serical# of L-4C||Vert/Horiz||Naming of the assembled unit||Assembler||
|| 404080975 || Vert || || ||
|| 404080976 || Vert || TMS-VISX: Geo-V2|| Akutsu ||
|| 404080977 || Vert || || ||
|| 404080978 || Vert || || ||
|| 404084240 || Vert || || ||
|| 404084241 || Vert || TMS-VISX: Geo-V3|| Akutsu ||
|| 404084242 || Vert || TMS-VISX: Geo-V1|| Fujii -> Akutsu ||
|| 2         || Horiz|| TMS-VISX: Geo-H3|| Akutsu -> Uraguchi ||
|| 3         || Horiz|| || ||
|| 4         || Horiz|| TMS-VISX: Geo-H1|| Akutsu ||
|| 5         || Horiz|| TMS-VISX: Geo-H2|| Akutsu ||
|| 15        || Horiz|| || ||
|| 16        || Horiz|| || ||
|| 17        || Horiz|| || ||