Differences between revisions 665 and 689 (spanning 24 versions)

KAGRA Commissioning Wiki

Task list

Schedule

Working people assignment

KAGRA Commissioning Planner

Readiness for the X arm commissioning

https://docs.google.com/spreadsheets/d/1S2gyFkyajlbPXMKCrqJV7181YFHUxUgPRB6SXz4z4jI/edit?usp=sharing

Meetings

Daily Meetings (9AM, 1PM)

Zoom URL: https://zoom.us/j/7631499341

Weekly Meetings (Tuesday 11AM)

Zoom URL: https://zoom.us/j/6676627462

Daily meeting

Date and time: Every weekday, 9AM
First ~10min in the morning meeting, as short as possible
Location: Control room and Fan hut connected by eZuce

2019/4/5(Fri.)

Schedule

Center
- 3/25: Venting
- 3/27-4/10: Fixing PR2
  - 4/4 -4/5: Gluing
- 4/10-11: Closing
- 4/12: Pump down
- 4/15~: Leak check
ITMX:
- 3/19: Cooling stop
- 3/25: Venting start
- 3/27: Opning chamber
- 3/27~: Fixing thermal touch
- 4/2~: closing chamber and start pumping down.
- 4/12: Cooling starts.
Xend
- 3/25: closing and pump down
- 4/8: Leak check
- 4/9-10: Venting
- 4/11-12: Exchange a broken LED for Photo sensor
- 4/15: Leak check
- 4/19(or 22): Cooling start
Yend
- 3/26: Venting start
- 3/28~: Fixing short inside chamber
- 4/3: Fixing F0 actuator
- 4/4~: closing chamber and start pumping down.
- 4/12: Cooling starts.
4/8: Daily meeting will be moved to 1PM
- Summary of work will last for a while in the morning meeting.
April: Measurement of TF, payload diagonalization on ITMX
End of April~: DRMI commissioning
End of April~: Y arm commissioning
~End of May: FPMI commissioning

Note

Official night work starts 4/8 or 4/15.

Weekend

Saturday and Sunday will be on laser hazard all the area.
Sat., Sun.: iMC alignment (Kokeyama)
Sat.: ETMX (Lucia)
Sat.: ETMY (Suzuki)

Report of work

Type Bp: Total 3 flags were glued on PR2 and PRM. Jigs will be released today.
CRY: It was found that on of the PD sensor at ETMX cryostat has no output. Now Ushiba-kun is checking it.
PEM, VAC: Vacuum values of center area have been added to monitor by Yokozawa-kun.
VIS: All VIS will be finally checked today and next week.

Work plan

KAGRA/Commissioning/DailyWork << < 2024 / 11 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Weekly meeting

Date and time: Every Tuesday, 11AM
Location: Meeting room at Hokubukaikan, or Zoom

No.	Date	Agenda	Schedule	Minute	Files

65-1	2019/4/2	Integrated Type-A meeting
65	2019/4/2	Agenda	See agenda page	Minute
64	2019/3/26	Agenda	See agenda page	Minute	file
63	2019/3/11	Agenda	See agenda page	Minute
62	2019/3/5	Agenda	See agenda page	Minute
61	2019/2/19	Agenda	See agenda page	Minute
60	2019/2/5	Agenda	See agenda page	Minute
59	2019/1/29	Agenda		Minute
58	2019/1/22	Agenda		Minute
57	2019/1/8	Agenda		Minute
56	2018/12/25	Agenda		Minute
55	2018/12/17	Agenda		Minute
54	2018/12/11	Agenda		Minute
53	2018/12/4	Agenda		Minute
52	2018/11/27	Agenda		Minute
51	2018/11/20	Agenda		Minute
50	2018/11/13	Agenda		Minute
49	2018/11/6	Agenda		Minute
48	2018/10/30	Agenda		Minute
47	2018/10/23	Agenda		Minute
46	2018/10/16	Agenda		Minute
45	2018/10/9	Agenda	Schedule	Minute
44	2018/10/2	Agenda	Schedule	Minute
43	2018/9/18	Agenda	Schedule	Minute
42	2018/9/4	Agenda	Schedule	Minute
41	2018/8/28	Agenda	Schedule	Minute
40	2018/8/21	Agenda	Schedule	Minute
39	2018/8/7	Agenda	Schedule	Minute
38	2018/7/31	Agenda	Schedule	Minute
37	2018/7/24	Agenda	Schedule	Minute
36	2018/7/17	Agenda	Schedule	Minute
35	2018/7/3	Agenda	Schedule	Minute
34	2018/6/26	Agenda	Schedule	Minute
33	2018/6/19	Agenda	Schedule	Minute
32	2018/6/12	Agenda	Schedule	Minute
31	2018/6/5	Agenda	Schedule	Minute
30	2018/5/22	Agenda	Schedule	Minute
29	2018/5/8	Agenda	Schedule	Minute
28	2018/5/1	Agenda	Schedule	Minute
27	2018/4/17	Agenda	Schedule	Minute
26	2018/4/10	Agenda	Schedule	Minute
25	2018/4/3	Agenda	Schedule	Minute
24	2018/3/27	Agenda	Schedule	Minute
23	2018/3/20	Agenda	Schedule	Minute
22	2018/3/13	Agenda	Schedule	Minute
21	2018/3/6	Agenda	Schedule	Minute
20	2018/2/27	Agenda	Schedule	Minute
19	2018/2/20	Agenda	Schedule	Minute
18	2018/2/13	Agenda	Schedule	Minute
17	2018/2/6	Agenda	Schedule	Minute
16	2018/1/30	Agenda	Schedule	Minute
15	2018/1/23	Agenda	Schedule	Minute
14	2018/1/16	Agenda	Schedule	Minute
13	2018/1/9	Agenda	Schedule	Minute
12	2017/12/19	Agenda	Schedule	Minute
11	2017/12/12	Agenda	Schedule	Minute
10	2017/11/28	Agenda	Schedule	Minute
9	2017/11/14	Agenda	Schedule	Minute
8	2017/11/7	Agenda	Schedule	Minute
7	2017/10/31	Agenda		Minute	G1707278-v4
6	2017/10/24	Agenda		Minute	G1707278-v3
5	2017/10/17	Agenda		Minute	G1707278-v2 G1707298 G1707300
4	2017/10/10			Minute	G1707278-v1
3	2017/10/3	Agenda		Minute	Commissioning plan for phase1
2	2017/9/26	Agenda		Minute	Commissioning plan for phase1
1	2017/9/19				Commissioning plan for phase1

Other meetings

2019/3/8: Scheduling for FPMI Agenda, Minute
2018/9/3: Extended chief meeting for Arm commissioning Agenda, Minute
2018/8/30: 3rd Meeting for pump down at ITMX (Minute, Check list)
2018/8/23: 2nd Meeting for pump down at ITMX (Minute, Check list)
2018/8/16: Meeting for pump down at ITMX (Minute, Check list)
2018/5/28: Meeting for looking back to phase1 for future of KAGRA as an extended chief meeting.
2018/4/11: Meeting for pump down test at ETMX 2 (Minute, Check list)
2018/4/5: Meeting for pump down test at ETMX 1 (Minute, Check list)
2018/3/14: Meeting for pump down test at Center are (Minute, Check list)
2018/1/18: Meeting for pump down and cooling at ETMY3 (Minute, Check list)
2018/1/17: Meeting for pump down and cooling at ETMY2 (Minute, Check list)
2018/1/10: Meeting for pump down and cooling at ETMY1 (Minute, Check list)
2017/12/13: Meeting for pump down at ETMY (Minute, schedule)
2017/11/27~12/1Commissioning Workshop 2017
2017/11/17: Meeting for closing ETY (Minute)
2017/10/12: Meeting about PR2 pitch misalignment (Minute)

Documents

Commissioning plan for Phase1

Communication tools

KAGRA commissioning Mailing List
wiki
- Task list (Phase base, stage base)
- Meetings (morning, weekly)
Scheduler
Task assignment list (example)
klog
Issue tracker: Bugzilla (currently site internal only)

for New members

Joining commissioning Mailing List

-  ⇤ ← Revision 665 as of 2019-03-25 09:18:09 → 
  Size: 19867
  Editor: OsamuMiyakawa
  Comment:
+   ← Revision 689 as of 2019-04-05 14:55:23 → ⇥
  Size: 19540
  Editor: OsamuMiyakawa
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 37:
-==== Daily Meetings (9AM) ====
+==== Daily Meetings (9AM, 1PM) ====
 Line 45:
-=== Daily meeting ===
+== Daily meeting ==
 Line 52:
-=== 2019/3/25(Mon.) ===

=== Schedule ===
+=== 2019/4/5(Fri.) ===

==== Schedule ====
 Line 56:
-  * --(2/26-27: Venting)--
  * 2/28-3/15: Health check and maintenance for VIS
   * --(PRM: One flag was dropped. -> leave it)--
   * --(3/4-14 PRM: Misalignment does not reach where beam hits damper.)--
   * --(3/6 PR3: range -> incline by 20-30mrad at mirror because of bistable.)--
   * --(3/15: BS:  Yaw offset adjustment by hand. -> 3/5-6)--
    * --(3/12: BS ok)--
   * --(3/15: some SRs work)--

  * --(3/5 afternoon or 3/6 morning: Coolers for ITMs will be stopped for 2-3 hours to change water.)--
  * --(3/18: Re-alignment)--
  * --(3/19-21: Closing)--
  * --(3/22: Pump down)--
-Line 70:
+Line 57:
-  * 3/26: Leak test
+  * 3/27-4/10: Fixing PR2
   * 4/4 -4/5: Gluing
  * 4/10-11: Closing
  * 4/12: Pump down
  * 4/15~: Leak check
-Line 74:
+Line 65:
-  * 3/28: Opning chamber
  * 3/28: Fixing thermal touch
  * 3/29: closing chamber and start pumping down.
  * 4/1: Start cooling.
+  * --(3/25: Venting start)--
  * --(3/27: Opning chamber)--
  * --(3/27~: Fixing thermal touch)--
  * --(4/2~: closing chamber and start pumping down.)--
  * 4/12: Cooling starts.

 * Xend
  * --(3/25: closing and pump down)--
  * 4/8: Leak check
  * 4/9-10: Venting
  * 4/11-12: Exchange a broken LED for Photo sensor
  * 4/15: Leak check
  * 4/19(or 22): Cooling start
 Line 80:
-  * --(1/25-2/20: Yend Pcal finalization)-- 
  * --(3/5: EYA remaining works by Enomoto, Inoue.)--
  * --(2/25-3/5: Yend WAB finalization)--
  * --(3/6: Y end closing (no laser hazard at least in the morning))--
  * --(3/7: Y end pump down)--
  * --(3/22-23: leak test)--
  * 3/27: cooling start

 * Xend
  * --(2/11-2/14: Xend NAB installation)--
  * --(2/21: Removing FC, Payload release)--
   * --(2/27: ETMX release)--
  * --(2/23-3/6: Xend Pcal finalization 1)--
   * --(Periscope installation)--
   * --(3/6: Beam position by IR and Green)--
  * --(3/5 AOS: EY and EX(if they have time) work.)--
  * --(3/6: Green X alignment (no IR), and no hazard at Y end.)--
  * --(3/11, ~20: Xend WAB finalization.)--
  * --(3/11~3/15: ETMX tuning.)--
  * --(3/19: ETMX finalization by Takahashi)--
  * --(3/18,19: ETMX alignement)--
  * --(3/23-24: Pcal alignment)--
  * --(3/24: Removing PD)--
  * 3/25: closing and pump down
  * 4/2-4: Leak test
  * 3/27: Cooling start
 
 * 3/25~ : Night work officially starts, daily meeting will be moved to 1PM
+  * --(3/26: Venting start)--
  * --(3/28~: Fixing short inside chamber)--
  * --(4/3: Fixing F0 actuator)--
  * --(4/4~: closing chamber and start pumping down.)--
  * 4/12: Cooling starts.


 * 4/8: Daily meeting will be moved to 1PM
-Line 110:
+Line 90:
- * 2/18-2/22: PRMI commissioning
 * 3/25~?: DRMI commissioning
 * 3/25-4/19: Y arm commissioning
 * 3/25-4/19: FPMI commissioning
+ * April: Measurement of TF, payload diagonalization on ITMX
 * End of April~: DRMI commissioning
 * End of April~: Y arm commissioning
 * ~End of May: FPMI commissioning
-Line 116:
+Line 96:
-  * Official night work starts 4/1.

=== Weekend ===
+  * Official night work starts 4/8 or 4/15.

==== Weekend ====
 * Saturday and Sunday will be on laser hazard all the area.
 * Sat., Sun.: iMC alignment (Kokeyama)
 * Sat.: ETMX (Lucia)
 * Sat.: ETMY (Suzuki)
-Line 122:
+Line 105:
- * Type Bp: It was fount that there was a big bump at PR2 last week, and Vertical of Oplev was out of range.
  * It was decided to vent again. Venting starts 11am today.

 * CAL: Beam position of Pcal was fixed at ETMX.
+ * Type Bp: Total 3 flags were glued on PR2 and PRM. Jigs will be released today. 
 * CRY: It was found that on of the PD sensor at ETMX cryostat has no output. Now Ushiba-kun is checking it.
 * PEM, VAC: Vacuum values of center area have been added to monitor by Yokozawa-kun.
 * VIS: All VIS will be finally checked today and next week.
-Line 130:
+Line 112:
- * Vent at center area.
-Line 139:
+Line 121:
- * Location: Meeting room at Hokubukaikan, or eZuce, Polycom
+ * Location: Meeting room at Hokubukaikan, or Zoom
-Line 143:
+Line 125:
+||65-1||2019/4/2||[[KAGRA/Commissioning/Weekly/20190402/TypeA_Agenda|Integrated Type-A meeting]]|| || || ||
||65||2019/4/2||[[KAGRA/Commissioning/Weekly/20190402/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190402/Minute|Minute]]||||
||64||2019/3/26||[[KAGRA/Commissioning/Weekly/20190326/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190326/Minute|Minute]]||[[attachment:KAGRA/Commissioning/20190326_avoding_delay.pptx|file]]||

KAGRA/Commissioning/DailyWork << < 2024 / 11 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

KAGRA/Commissioning/DailyWork << < 2024 / 11 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

KAGRA Commissioning Wiki

Task list

Schedule

Working people assignment

Readiness for the X arm commissioning

Emergency contact person for subsystem

Meetings

Daily Meetings (9AM, 1PM)

Weekly Meetings (Tuesday 11AM)

Daily meeting

2019/4/5(Fri.)

Schedule

Note

Weekend

Report of work

Work plan

Weekly meeting

Other meetings

Documents

Communication tools

for New members

KAGRA/Commissioning/DailyWork << < 2024 / 11 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30