Differences between revisions 674 and 738 (spanning 64 versions)

KAGRA Commissioning Wiki

Task list

Schedule

Working people assignment

KAGRA Commissioning Planner

Readiness for the X arm commissioning

https://docs.google.com/spreadsheets/d/1S2gyFkyajlbPXMKCrqJV7181YFHUxUgPRB6SXz4z4jI/edit?usp=sharing

Meetings

Daily Meetings (9AM, 1PM)

Zoom URL: https://zoom.us/j/7631499341

Weekly Meetings (Tuesday 11AM)

Zoom URL: https://zoom.us/j/6676627462

Daily meeting

Date and time: Every weekday, 9AM
First ~10min in the morning meeting, as short as possible
Location: Control room and Fan hut connected by eZuce

2019/5/23(Thur.)

Schedule

5/22: RT PC maintenance -> go to safe mode for all VIS connected Dolphin (BS)
5/22-23: MZ release from PSL
5/20-24: Exchanging cryo valves.
6/8: Engineering run
ITMX
- 5/22AM~: tuned off cryostat cooler, finesse measurement for Xarm
- 5/22AM~: tuned off shield cooler, finesse measurement for Xarm
ETMX
- 5/2: Cooling start
- 5/29: Cooling done
ITMY
- 5/23AM~: tuned off cryostat cooler, finesse measurement for Yarm
ETMY
- 5/17~: tuned off ETMY cryostat cooler
- 5/24PM~ inject 100Pa Nitrogen.
- 5/27 evacuation of Nitrogen.
- 6/3-6/14: Installation of TMS for ETMY
4/22-5/31: Yarm commissioning
5/27-6/30: DRMI commissioning
7/1-8/9: DRFPMI commissioning
8/12-10/4: DRFPMI ASC
10/7-11/15: Post Commissioning
11/18-12/13: Noise hunting

Note

COM: ETMY pitch has still range limit. One of the motor might reach the edge, and one more motor on the same DOF should work if somebody goes to EY and put more current on the driver.
There was request to CRY people to attend the morning or noon meeting.
CRY: Exchanging cryo valve during this week.

Night work

Weekend

Report of work

CRY: ITMX cryostat cooler and shield cooler were stopped yesterday. Outgas pressure was normal.
CRY: ITMY cryostat cooler was stopped yesterday. Outgas pressure was normal.
CRY: ETMY Shield cooler was stopped yesterday and there was a big increment of pressure. It means ETMY may have some contamination.
IOO: MZ was released from the main path of PSL.
IOO team is still woking on realignment after removing MZ. Unexpected large beam shift by removing BS happened.
Type Bp: Cleaned aroundf PR2.
Type Bp: Stepping motor did not work on PR suspensions GAS filter.
Type B, Bp: Checking for LVDT for PR2 SR2 and BS
Type B: It was found that loose cable connection on H3 coil for RM of SR2. It was fixed.
DGS: We added BIO cards to k1lsc0. However it turned out that rebooting k1lsc always fails. Actually it was needed to shutdown to recover. V3 PC seems to have some problem.
DGS: Maintenance work for adding BIO cards.
DGS: Camera server maintenance. If you need camera, please use k1cam1.

Work plan

CRY: Repairing work for cooler valve will finish today. The last item is for ITMY shield cooler.
COM: Finesse will be done tonight or tomorrow morning, depending on progress of IOO work.

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

Weekly meeting

Date and time: Every Tuesday, 11AM
Location: Meeting room at Hokubukaikan, or Zoom

No.	Date	Agenda	Schedule	Minute	Files

71	2019/5/21	Agenda	See agenda page	Minute
70	2019/5/14	Agenda	See agenda page	Minute
69	2019/5/7	Agenda	See agenda page	Minute
68	2019/4/23	Agenda	See agenda page	Minute
67	2019/4/16	Agenda	See agenda page	Minute
66	2019/4/9	Agenda	See agenda page	Minute
65-1	2019/4/2	Integrated Type-A meeting
65	2019/4/2	Agenda	See agenda page	Minute
64	2019/3/26	Agenda	See agenda page	Minute	file
63	2019/3/11	Agenda	See agenda page	Minute
62	2019/3/5	Agenda	See agenda page	Minute
61	2019/2/19	Agenda	See agenda page	Minute
60	2019/2/5	Agenda	See agenda page	Minute
59	2019/1/29	Agenda		Minute
58	2019/1/22	Agenda		Minute
57	2019/1/8	Agenda		Minute
56	2018/12/25	Agenda		Minute
55	2018/12/17	Agenda		Minute
54	2018/12/11	Agenda		Minute
53	2018/12/4	Agenda		Minute
52	2018/11/27	Agenda		Minute
51	2018/11/20	Agenda		Minute
50	2018/11/13	Agenda		Minute
49	2018/11/6	Agenda		Minute
48	2018/10/30	Agenda		Minute
47	2018/10/23	Agenda		Minute
46	2018/10/16	Agenda		Minute
45	2018/10/9	Agenda	Schedule	Minute
44	2018/10/2	Agenda	Schedule	Minute
43	2018/9/18	Agenda	Schedule	Minute
42	2018/9/4	Agenda	Schedule	Minute
41	2018/8/28	Agenda	Schedule	Minute
40	2018/8/21	Agenda	Schedule	Minute
39	2018/8/7	Agenda	Schedule	Minute
38	2018/7/31	Agenda	Schedule	Minute
37	2018/7/24	Agenda	Schedule	Minute
36	2018/7/17	Agenda	Schedule	Minute
35	2018/7/3	Agenda	Schedule	Minute
34	2018/6/26	Agenda	Schedule	Minute
33	2018/6/19	Agenda	Schedule	Minute
32	2018/6/12	Agenda	Schedule	Minute
31	2018/6/5	Agenda	Schedule	Minute
30	2018/5/22	Agenda	Schedule	Minute
29	2018/5/8	Agenda	Schedule	Minute
28	2018/5/1	Agenda	Schedule	Minute
27	2018/4/17	Agenda	Schedule	Minute
26	2018/4/10	Agenda	Schedule	Minute
25	2018/4/3	Agenda	Schedule	Minute
24	2018/3/27	Agenda	Schedule	Minute
23	2018/3/20	Agenda	Schedule	Minute
22	2018/3/13	Agenda	Schedule	Minute
21	2018/3/6	Agenda	Schedule	Minute
20	2018/2/27	Agenda	Schedule	Minute
19	2018/2/20	Agenda	Schedule	Minute
18	2018/2/13	Agenda	Schedule	Minute
17	2018/2/6	Agenda	Schedule	Minute
16	2018/1/30	Agenda	Schedule	Minute
15	2018/1/23	Agenda	Schedule	Minute
14	2018/1/16	Agenda	Schedule	Minute
13	2018/1/9	Agenda	Schedule	Minute
12	2017/12/19	Agenda	Schedule	Minute
11	2017/12/12	Agenda	Schedule	Minute
10	2017/11/28	Agenda	Schedule	Minute
9	2017/11/14	Agenda	Schedule	Minute
8	2017/11/7	Agenda	Schedule	Minute
7	2017/10/31	Agenda		Minute	G1707278-v4
6	2017/10/24	Agenda		Minute	G1707278-v3
5	2017/10/17	Agenda		Minute	G1707278-v2 G1707298 G1707300
4	2017/10/10			Minute	G1707278-v1
3	2017/10/3	Agenda		Minute	Commissioning plan for phase1
2	2017/9/26	Agenda		Minute	Commissioning plan for phase1
1	2017/9/19				Commissioning plan for phase1

Other meetings

2019/3/8: Scheduling for FPMI Agenda, Minute
2018/9/3: Extended chief meeting for Arm commissioning Agenda, Minute
2018/8/30: 3rd Meeting for pump down at ITMX (Minute, Check list)
2018/8/23: 2nd Meeting for pump down at ITMX (Minute, Check list)
2018/8/16: Meeting for pump down at ITMX (Minute, Check list)
2018/5/28: Meeting for looking back to phase1 for future of KAGRA as an extended chief meeting.
2018/4/11: Meeting for pump down test at ETMX 2 (Minute, Check list)
2018/4/5: Meeting for pump down test at ETMX 1 (Minute, Check list)
2018/3/14: Meeting for pump down test at Center are (Minute, Check list)
2018/1/18: Meeting for pump down and cooling at ETMY3 (Minute, Check list)
2018/1/17: Meeting for pump down and cooling at ETMY2 (Minute, Check list)
2018/1/10: Meeting for pump down and cooling at ETMY1 (Minute, Check list)
2017/12/13: Meeting for pump down at ETMY (Minute, schedule)
2017/11/27~12/1Commissioning Workshop 2017
2017/11/17: Meeting for closing ETY (Minute)
2017/10/12: Meeting about PR2 pitch misalignment (Minute)

Documents

Commissioning plan for Phase1

Communication tools

KAGRA commissioning Mailing List
wiki
- Task list (Phase base, stage base)
- Meetings (morning, weekly)
Scheduler
Task assignment list (example)
klog
Issue tracker: Bugzilla (currently site internal only)

for New members

Joining commissioning Mailing List

-  ⇤ ← Revision 674 as of 2019-03-26 16:49:46 → 
  Size: 20539
  Editor: YoichiAso
  Comment:
+   ← Revision 738 as of 2019-05-23 09:38:53 → ⇥
  Size: 21263
  Editor: OsamuMiyakawa
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 37:
-==== Daily Meetings (9AM) ====
+==== Daily Meetings (9AM, 1PM) ====
 Line 52:
-=== 2019/3/26(Tue.) ===
+=== 2019/5/23(Thur.) ===
 Line 55:
- * Center
  * --(2/26-27: Venting)--
  * 2/28-3/15: Health check and maintenance for VIS
   * --(PRM: One flag was dropped. -> leave it)--
   * --(3/4-14 PRM: Misalignment does not reach where beam hits damper.)--
   * --(3/6 PR3: range -> incline by 20-30mrad at mirror because of bistable.)--
   * --(3/15: BS:  Yaw offset adjustment by hand. -> 3/5-6)--
    * --(3/12: BS ok)--
   * --(3/15: some SRs work)--

  * --(3/5 afternoon or 3/6 morning: Coolers for ITMs will be stopped for 2-3 hours to change water.)--
  * --(3/18: Re-alignment)--
  * --(3/19-21: Closing)--
  * --(3/22: Pump down)--
  * --(3/25: Venting)--
  * 3/27: Fixing PR2
  * 4/3: Closing and pump down

 * ITMX: 
  * --(3/19: Cooling stop)--
  * 3/25: Venting start
  * 3/27: Opning chamber
  * 3/27~: Fixing thermal touch
  * ~4/3: closing chamber and start pumping down.
  * 4/12: Cooling starts.

 * Xend
  * --(2/11-2/14: Xend NAB installation)--
  * --(2/21: Removing FC, Payload release)--
   * --(2/27: ETMX release)--
  * --(2/23-3/6: Xend Pcal finalization 1)--
   * --(Periscope installation)--
   * --(3/6: Beam position by IR and Green)--
  * --(3/5 AOS: EY and EX(if they have time) work.)--
  * --(3/6: Green X alignment (no IR), and no hazard at Y end.)--
  * --(3/11, ~20: Xend WAB finalization.)--
  * --(3/11~3/15: ETMX tuning.)--
  * --(3/19: ETMX finalization by Takahashi)--
  * --(3/18,19: ETMX alignement)--
  * --(3/23-24: Pcal alignment)--
  * --(3/24: Removing PD)--
  * --(3/25: closing and pump down)--
  * 4/12: Cooling start

 * Yend
  * --(1/25-2/20: Yend Pcal finalization)-- 
  * --(3/5: EYA remaining works by Enomoto, Inoue.)--
  * --(2/25-3/5: Yend WAB finalization)--
  * --(3/6: Y end closing (no laser hazard at least in the morning))--
  * --(3/7: Y end pump down)--
  * --(3/22-23: leak test)--
  * 3/26: Venting start
  * 3/28~: Fixing short inside chamber
  * ~4/2: closing chamber and start pumping down.
  * 4/10: Cooling starts.


 * 4/1~ : Night work starts, daily meeting will be moved to 1PM
  * Summary of work will last for a while in the morning meeting.

 * --(2/18-2/22: PRMI commissioning)--
 * End of April~: DRMI commissioning
 * End of April~: Y arm commissioning
 * ~End of May: FPMI commissioning
+ * --(5/22: RT PC maintenance -> go to safe mode for all VIS connected Dolphin (BS) )--
 * 5/22-23: MZ release from PSL
 * 5/20-24: Exchanging cryo valves.
 * 6/8: Engineering run

 * ITMX
  * --(5/22AM~: tuned off cryostat cooler, finesse measurement for Xarm)--
  * --(5/22AM~: tuned off shield cooler, finesse measurement for Xarm)--

 * ETMX
  * --(5/2: Cooling start)--
  * 5/29: Cooling done

 * ITMY
  * --(5/23AM~: tuned off cryostat cooler, finesse measurement for Yarm)--

 * ETMY
  * --(5/17~: tuned off ETMY cryostat cooler)--
  * 5/24PM~ inject 100Pa Nitrogen.
  * 5/27 evacuation of Nitrogen.
  * 6/3-6/14: Installation of TMS for ETMY


 * 4/22-5/31: Yarm commissioning	
 * 5/27-6/30: DRMI commissioning
 * 7/1-8/9: DRFPMI commissioning
 * 8/12-10/4: DRFPMI ASC
 * 10/7-11/15: Post Commissioning
 * 11/18-12/13: Noise hunting
-Line 121:
+Line 86:
-  * Official night work starts 4/1.
+ * COM: ETMY pitch has still range limit. One of the motor might reach the edge, and one more motor on the same DOF should work if somebody goes to EY and put more current on the driver. 
 * There was request to CRY people to attend the morning or noon meeting.
 * CRY: Exchanging cryo valve during this week.

==== Night work ====
-Line 125:
+Line 94:
-Line 127:
+Line 95:
- * CRY: Payload had short cable. It was decided to vent again.
 * Pumping down at ETMX is going on from yesterday. Drift was monitored and compensated.
 * Venting at central area is going on from yesterday. Drift was monitored, it will be compensated today at the very last stage of vent.
+ * CRY: ITMX cryostat cooler and shield cooler were stopped yesterday. Outgas pressure was normal.
 * CRY: ITMY cryostat cooler was stopped yesterday. Outgas pressure was normal.
 * CRY: ETMY Shield cooler was stopped yesterday and there was a big increment of pressure. It means ETMY may have some contamination.

 * IOO: MZ was released from the main path of PSL.
 * IOO team is still woking on realignment after removing MZ. Unexpected large beam shift by removing BS happened.

 * Type Bp: Cleaned aroundf PR2.
 * Type Bp: Stepping motor did not work on PR suspensions GAS filter.
 * Type B, Bp: Checking for LVDT for PR2 SR2 and BS
 * Type B: It was found that loose cable connection on H3 coil for RM of SR2. It was fixed. 


 * DGS: We added BIO cards to k1lsc0. However it turned out that rebooting k1lsc always fails. Actually it was needed to shutdown to recover. V3 PC seems to have some problem.


 * DGS: Maintenance work for adding BIO cards.
 * DGS: Camera server maintenance. If you need camera, please use k1cam1.
-Line 133:
+Line 116:
+ * CRY: Repairing work for cooler valve will finish today. The last item is for ITMY shield cooler.
 * COM: Finesse will be done tonight or tomorrow morning, depending on progress of IOO work.
-Line 145:
+Line 132:
-||65-1||2019/4/2||[[KAGRA/Commissioning/Weekly/20190402/TypeA_Agenda|Integrated Type-A meeting]]||||||||
+||71||2019/5/21||[[KAGRA/Commissioning/Weekly/20190521/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190521/Minute|Minute]]||||
||70||2019/5/14||[[KAGRA/Commissioning/Weekly/20190514/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190514/Minute|Minute]]||||
||69||2019/5/7||[[KAGRA/Commissioning/Weekly/20190507/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190507/Minute|Minute]]||||
||68||2019/4/23||[[KAGRA/Commissioning/Weekly/20190423/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190423/Minute|Minute]]||||
||67||2019/4/16||[[KAGRA/Commissioning/Weekly/20190416/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190416/Minute|Minute]]||||
||66||2019/4/9||[[KAGRA/Commissioning/Weekly/20190409/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190409/Minute|Minute]]||||
||65-1||2019/4/2||[[KAGRA/Commissioning/Weekly/20190402/TypeA_Agenda|Integrated Type-A meeting]]|| || || ||

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

KAGRA Commissioning Wiki

Task list

Schedule

Working people assignment

Readiness for the X arm commissioning

Emergency contact person for subsystem

Meetings

Daily Meetings (9AM, 1PM)

Weekly Meetings (Tuesday 11AM)

Daily meeting

2019/5/23(Thur.)

Schedule

Note

Night work

Weekend

Report of work

Work plan

Weekly meeting

Other meetings

Documents

Communication tools

for New members

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31