Differences between revisions 738 and 789 (spanning 51 versions)

KAGRA Commissioning Wiki

Today's work plan: 2019/7/16 1PM - 2019/7/17 1PM

Afternoon

ETMY L2Angle decoupling (Yamada, Nakano)
Check the schematic of the High Power Coil Driver (Fabian, Terrence)
Fix the CARM board boost issue (Enomoto)
Design a filter for DARM (Stefan)

Evening

Y-arm mass lock trial

Morning

DGS maintenance
- Power supply replacement of SR3 (Yamamoto)
ITM T-cam computer replacement (Yokozawa)
OMC extraction (Aso, et al)
Check dimensions around OSTM (Takahashi)

Standing issues

Y-arm lock
- ETMY suspension control
  - L2Angle decoupling
  - ETMY coil driver range increase
- CARM board boost does not engage
DRMI lock stability
- Model HOM-PHD signal distortion (Aso, Kokeyama)
- Search for better Gouy phase in PRC
Initial alignment automation
Type-A related
- Add aligned state in Guardian (Kokeyama)
Type-B related
- SR3 Yaw motion is too large
  - Different ground level between the IO chasis and the AA filter box may be the reason
  - Replace the DC power supply
- BS IM2TM transfer function measurement
Type-C related
- Check dimensions around the OSTM
- OSEM characterization for OSTM
OMC
- Extract OMC
- Check the OMC on the AS table
Laser safety
- Debug the laser safety guardian

Task list

Schedule

Working people assignment

KAGRA Commissioning Planner

Readiness for the X arm commissioning

https://docs.google.com/spreadsheets/d/1S2gyFkyajlbPXMKCrqJV7181YFHUxUgPRB6SXz4z4jI/edit?usp=sharing

Meetings

Daily Meetings (9AM, 1PM)

Zoom URL: https://zoom.us/j/7631499341

Weekly Meetings (Tuesday 11AM)

Zoom URL: https://zoom.us/j/6676627462

Daily meeting

Date and time: Every weekday, 9AM
First ~10min in the morning meeting, as short as possible
Location: Control room and Fan hut connected by eZuce

2019/7/16(Tue.)

Schedule

~7/31: Trial for DRMI with polarization.
7/6~: Trial for mass lock
ITMX
ETMX
ITMY
- 7/4: Turbo pump on
ETMY
- 7/4: Turbo pump on
Long term:
- 4/22-5/31: Yarm commissioning
- 5/27-6/30: DRMI commissioning
- 7/1-8/9: FPMI/DRFPMI commissioning
- 8/12-10/4: ASC
- 10/7-11/15: Post Commissioning
- 11/18-12/13: Noise hunting

Note

Night work

Weekend

Report of work

OMC: Beam spot on mirror moved. One (or more) of the mirrors seems to be misaligned. OMC will be pulled tomorrow.
Y arm: 20dB suppression on LSC below 1Hz was seen on mass lock trial.
- Opleve control was slightly changed from IM control to TM control.
- High frequency is limited by noise. Needs high power coil driver modification.
Type B: H2 on SR3 was noisy, but needs more time to investigate it.
80mHz peak was reduced by changing damping setting.
RTPC for ASC and ALS were dead somehow.

Work plan

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

Weekly meeting

Date and time: Every Tuesday, 11AM
Location: Meeting room at Hokubukaikan, or Zoom

No.	Date	Agenda	Schedule	Minute	Files

75	2019/7/16	Agenda	See agenda page	Minute
74	2019/7/2	Agenda	See agenda page	Minute
73	2019/6/25	Agenda	See agenda page	Minute
72	2019/5/28	Agenda	See agenda page	Minute
71	2019/5/21	Agenda	See agenda page	Minute
70	2019/5/14	Agenda	See agenda page	Minute
69	2019/5/7	Agenda	See agenda page	Minute
68	2019/4/23	Agenda	See agenda page	Minute
67	2019/4/16	Agenda	See agenda page	Minute
66	2019/4/9	Agenda	See agenda page	Minute
65-1	2019/4/2	Integrated Type-A meeting
65	2019/4/2	Agenda	See agenda page	Minute
64	2019/3/26	Agenda	See agenda page	Minute	file
63	2019/3/11	Agenda	See agenda page	Minute
62	2019/3/5	Agenda	See agenda page	Minute
61	2019/2/19	Agenda	See agenda page	Minute
60	2019/2/5	Agenda	See agenda page	Minute
59	2019/1/29	Agenda		Minute
58	2019/1/22	Agenda		Minute
57	2019/1/8	Agenda		Minute
56	2018/12/25	Agenda		Minute
55	2018/12/17	Agenda		Minute
54	2018/12/11	Agenda		Minute
53	2018/12/4	Agenda		Minute
52	2018/11/27	Agenda		Minute
51	2018/11/20	Agenda		Minute
50	2018/11/13	Agenda		Minute
49	2018/11/6	Agenda		Minute
48	2018/10/30	Agenda		Minute
47	2018/10/23	Agenda		Minute
46	2018/10/16	Agenda		Minute
45	2018/10/9	Agenda	Schedule	Minute
44	2018/10/2	Agenda	Schedule	Minute
43	2018/9/18	Agenda	Schedule	Minute
42	2018/9/4	Agenda	Schedule	Minute
41	2018/8/28	Agenda	Schedule	Minute
40	2018/8/21	Agenda	Schedule	Minute
39	2018/8/7	Agenda	Schedule	Minute
38	2018/7/31	Agenda	Schedule	Minute
37	2018/7/24	Agenda	Schedule	Minute
36	2018/7/17	Agenda	Schedule	Minute
35	2018/7/3	Agenda	Schedule	Minute
34	2018/6/26	Agenda	Schedule	Minute
33	2018/6/19	Agenda	Schedule	Minute
32	2018/6/12	Agenda	Schedule	Minute
31	2018/6/5	Agenda	Schedule	Minute
30	2018/5/22	Agenda	Schedule	Minute
29	2018/5/8	Agenda	Schedule	Minute
28	2018/5/1	Agenda	Schedule	Minute
27	2018/4/17	Agenda	Schedule	Minute
26	2018/4/10	Agenda	Schedule	Minute
25	2018/4/3	Agenda	Schedule	Minute
24	2018/3/27	Agenda	Schedule	Minute
23	2018/3/20	Agenda	Schedule	Minute
22	2018/3/13	Agenda	Schedule	Minute
21	2018/3/6	Agenda	Schedule	Minute
20	2018/2/27	Agenda	Schedule	Minute
19	2018/2/20	Agenda	Schedule	Minute
18	2018/2/13	Agenda	Schedule	Minute
17	2018/2/6	Agenda	Schedule	Minute
16	2018/1/30	Agenda	Schedule	Minute
15	2018/1/23	Agenda	Schedule	Minute
14	2018/1/16	Agenda	Schedule	Minute
13	2018/1/9	Agenda	Schedule	Minute
12	2017/12/19	Agenda	Schedule	Minute
11	2017/12/12	Agenda	Schedule	Minute
10	2017/11/28	Agenda	Schedule	Minute
9	2017/11/14	Agenda	Schedule	Minute
8	2017/11/7	Agenda	Schedule	Minute
7	2017/10/31	Agenda		Minute	G1707278-v4
6	2017/10/24	Agenda		Minute	G1707278-v3
5	2017/10/17	Agenda		Minute	G1707278-v2 G1707298 G1707300
4	2017/10/10			Minute	G1707278-v1
3	2017/10/3	Agenda		Minute	Commissioning plan for phase1
2	2017/9/26	Agenda		Minute	Commissioning plan for phase1
1	2017/9/19				Commissioning plan for phase1

Other meetings

2019/6/11: Summery meeting for E Run 1 Agenda, Minute
2019/6/5: Meeting for E Run on 6/8 Agenda, Minute
2019/3/8: Scheduling for FPMI Agenda, Minute
2018/9/3: Extended chief meeting for Arm commissioning Agenda, Minute
2018/8/30: 3rd Meeting for pump down at ITMX (Minute, Check list)
2018/8/23: 2nd Meeting for pump down at ITMX (Minute, Check list)
2018/8/16: Meeting for pump down at ITMX (Minute, Check list)
2018/5/28: Meeting for looking back to phase1 for future of KAGRA as an extended chief meeting.
2018/4/11: Meeting for pump down test at ETMX 2 (Minute, Check list)
2018/4/5: Meeting for pump down test at ETMX 1 (Minute, Check list)
2018/3/14: Meeting for pump down test at Center are (Minute, Check list)
2018/1/18: Meeting for pump down and cooling at ETMY3 (Minute, Check list)
2018/1/17: Meeting for pump down and cooling at ETMY2 (Minute, Check list)
2018/1/10: Meeting for pump down and cooling at ETMY1 (Minute, Check list)
2017/12/13: Meeting for pump down at ETMY (Minute, schedule)
2017/11/27~12/1Commissioning Workshop 2017
2017/11/17: Meeting for closing ETY (Minute)
2017/10/12: Meeting about PR2 pitch misalignment (Minute)

Documents

Commissioning plan for Phase1

Communication tools

KAGRA commissioning Mailing List
wiki
- Task list (Phase base, stage base)
- Meetings (morning, weekly)
Scheduler
Task assignment list (example)
klog
Issue tracker: Bugzilla (currently site internal only)

for New members

Joining commissioning Mailing List

-  ⇤ ← Revision 738 as of 2019-05-23 09:38:53 → 
  Size: 21263
  Editor: OsamuMiyakawa
  Comment:
+   ← Revision 789 as of 2019-07-16 15:21:53 → ⇥
  Size: 22136
  Editor: YoichiAso
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
+== Today's work plan: 2019/7/16 1PM - 2019/7/17 1PM ==

=== Afternoon ===
 * ETMY !L2Angle decoupling (Yamada, Nakano)
 * Check the schematic of the High Power Coil Driver (Fabian, Terrence)
 * Fix the CARM board boost issue (Enomoto)
 * Design a filter for DARM (Stefan)

=== Evening ===
 * Y-arm mass lock trial

=== Morning ===
 * DGS maintenance 
  * Power supply replacement of SR3 (Yamamoto)
 * ITM T-cam computer replacement (Yokozawa)
 * OMC extraction (Aso, et al)
 * Check dimensions around OSTM (Takahashi)

----
== Standing issues ==

 * Y-arm lock
  * ETMY suspension control
   * L2Angle decoupling
   * ETMY coil driver range increase
  * CARM board boost does not engage
 * DRMI lock stability
  * Model HOM-PHD signal distortion (Aso, Kokeyama)
  * Search for better Gouy phase in PRC
 * Initial alignment automation
 * Type-A related
  * Add aligned state in Guardian (Kokeyama)
 * Type-B related
  * SR3 Yaw motion is too large
   * Different ground level between the IO chasis and the AA filter box may be the reason
   * Replace the DC power supply
  * BS IM2TM transfer function measurement
 * Type-C related
  * Check dimensions around the OSTM
  * OSEM characterization for OSTM
 * OMC
  * Extract OMC
  * Check the OMC on the AS table
 * Laser safety
  * Debug the laser safety guardian
-Line 8:
+Line 58:
+ * [[https://docs.google.com/spreadsheets/d/1DSltWg18KrwnfkVJmSm09TkQ82aQ5lHAdaC9uCozGC0/edit?usp=sharing|Preparation for joining O3]]
-Line 52:
+Line 103:
-=== 2019/5/23(Thur.) ===
+=== 2019/7/16(Tue.) ===
-Line 55:
+Line 106:
- * --(5/22: RT PC maintenance -> go to safe mode for all VIS connected Dolphin (BS) )--
 * 5/22-23: MZ release from PSL
 * 5/20-24: Exchanging cryo valves.
 * 6/8: Engineering run
+ * ~7/31: Trial for DRMI with polarization.
 * 7/6~: Trial for mass lock
-Line 61:
+Line 110:
-  * --(5/22AM~: tuned off cryostat cooler, finesse measurement for Xarm)--
  * --(5/22AM~: tuned off shield cooler, finesse measurement for Xarm)--
-Line 65:
+Line 112:
-  * --(5/2: Cooling start)--
  * 5/29: Cooling done
-Line 69:
+Line 114:
-  * --(5/23AM~: tuned off cryostat cooler, finesse measurement for Yarm)--
+  * 7/4: Turbo pump on
-Line 72:
+Line 117:
-  * --(5/17~: tuned off ETMY cryostat cooler)--
  * 5/24PM~ inject 100Pa Nitrogen.
  * 5/27 evacuation of Nitrogen.
  * 6/3-6/14: Installation of TMS for ETMY


 * 4/22-5/31: Yarm commissioning   * 5/27-6/30: DRMI commissioning
 * 7/1-8/9: DRFPMI commissioning
 * 8/12-10/4: DRFPMI ASC
 * 10/7-11/15: Post Commissioning
 * 11/18-12/13: Noise hunting
+  * 7/4: Turbo pump on


 * Long term:
  * --(4/22-5/31: Yarm commissioning)--
  * --(5/27-6/30: DRMI commissioning)--
  * 7/1-8/9: FPMI/DRFPMI commissioning
  * 8/12-10/4: ASC
  * 10/7-11/15: Post Commissioning
  * 11/18-12/13: Noise hunting
-Line 86:
+Line 130:
- * COM: ETMY pitch has still range limit. One of the motor might reach the edge, and one more motor on the same DOF should work if somebody goes to EY and put more current on the driver. 
 * There was request to CRY people to attend the morning or noon meeting.
 * CRY: Exchanging cryo valve during this week.
-Line 95:
+Line 137:
- * CRY: ITMX cryostat cooler and shield cooler were stopped yesterday. Outgas pressure was normal.
 * CRY: ITMY cryostat cooler was stopped yesterday. Outgas pressure was normal.
 * CRY: ETMY Shield cooler was stopped yesterday and there was a big increment of pressure. It means ETMY may have some contamination.

 * IOO: MZ was released from the main path of PSL.
 * IOO team is still woking on realignment after removing MZ. Unexpected large beam shift by removing BS happened.

 * Type Bp: Cleaned aroundf PR2.
 * Type Bp: Stepping motor did not work on PR suspensions GAS filter.
 * Type B, Bp: Checking for LVDT for PR2 SR2 and BS
 * Type B: It was found that loose cable connection on H3 coil for RM of SR2. It was fixed. 


 * DGS: We added BIO cards to k1lsc0. However it turned out that rebooting k1lsc always fails. Actually it was needed to shutdown to recover. V3 PC seems to have some problem.


 * DGS: Maintenance work for adding BIO cards.
 * DGS: Camera server maintenance. If you need camera, please use k1cam1.
+ * OMC: Beam spot on mirror moved. One (or more) of the mirrors seems to be misaligned. OMC will be pulled tomorrow.
 * Y arm: 20dB suppression on LSC below 1Hz was seen on mass lock trial.
  * Opleve control was slightly changed from IM control to TM control.
  * High frequency is limited by noise. Needs high power coil driver modification.
 * Type B: H2 on SR3 was noisy, but needs more time to investigate it.
 * 80mHz peak was reduced by changing damping setting.
 * RTPC for ASC and ALS were dead somehow.
-Line 116:
+Line 147:
- * CRY: Repairing work for cooler valve will finish today. The last item is for ITMY shield cooler.
 * COM: Finesse will be done tonight or tomorrow morning, depending on progress of IOO work.
-Line 132:
+Line 161:
+||75||2019/7/16||[[KAGRA/Commissioning/Weekly/20190716/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190716/Minute|Minute]]||||
||74||2019/7/2||[[KAGRA/Commissioning/Weekly/20190702/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190702/Minute|Minute]]||||
||73||2019/6/25||[[KAGRA/Commissioning/Weekly/20190625/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190625/Minute|Minute]]||||
||72||2019/5/28||[[KAGRA/Commissioning/Weekly/20190528/Agenda|Agenda]]||See agenda page||[[KAGRA/Commissioning/Weekly/20190528/Minute|Minute]]||||
-Line 208:
+Line 241:
+ * 2019/6/11: Summery meeting for E Run 1 [[/Meetings/Others/20190611/Agenda|Agenda]], [[KAGRA/Commissioning/Meetings/Others/20190611|Minute]]
 * 2019/6/5: Meeting for E Run on 6/8 [[/Meetings/Others/20190608/Agenda|Agenda]], [[KAGRA/Commissioning/Meetings/Others/20190608|Minute]]

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

KAGRA Commissioning Wiki

Today's work plan: 2019/7/16 1PM - 2019/7/17 1PM

Afternoon

Evening

Morning

Standing issues

Task list

Schedule

Working people assignment

Readiness for the X arm commissioning

Emergency contact person for subsystem

Meetings

Daily Meetings (9AM, 1PM)

Weekly Meetings (Tuesday 11AM)

Daily meeting

2019/7/16(Tue.)

Schedule

Note

Night work

Weekend

Report of work

Work plan

Weekly meeting

Other meetings

Documents

Communication tools

for New members

KAGRA/Commissioning/DailyWork << < 2024 / 7 > >>
Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31