KAGRA Commissioning Wiki

Daily commissioning meeting

• Time: 1PM everyday
• Location: KAGRA control room

• Remote participation: https://zoom.us/j/7631499341

Today's work plan: 2019/7/18 PM - 2019/7/19 PM

Afternoon

• DRMI OLT measurement (SB)
• Xend - Photon calibrator BIO card fix (Inoue)
• Pcal injection test (Inoue)
• Alert monitor grace DB in Mozumi computer room (Urchen)
• Fabian and Shimode-san will check the temperature raise, analog WD, etc for the coil driver change

Evening

• DARM OLT measurement (SB)
• If coil driver modification ready, arm commissioning

Morning

• SR3 OSEM check (Fabian)
• Fix SRM oplev bad position (Fabian)
• PEM IXC seis acc measurement (Yokozawa)

Today's work plan: 2019/7/17 1PM - 2019/7/18 1PM

Commissioning leader: Aso (July 17th-19th)

Afternoon

• ETMY HP coil driver check (Takahashi, Yamada)
  • Watchdog, Output resistance, Cable resistance, Take a picture of the PCB
• Check the maximum current acceptable by the in-vac cable.
  • Calculate theoretical limit (Ushiba)
• AS alignment (Kokeyama et al)
• SR3 OSEM check (Fabian, Terrence)
• Y-arm mass lock trial (SB, EY, MN, et al)
• ISS work (Yoshioka, Nakano)

Evening

• Y-arm mass lock trial (SB, EY, MN, et al)
• Type-A guardian work on ETMX (Kokeyama)
• DRMI investigation ? (SB, EY, MN, et al)
• Found Y end coil needed more range, more drive for MN (dominate 10Hz sensing noise limited, cross over)

Note

• DC feedback works perfect
• Tcam alignment system is done (see from camera screen)
• ALIGNED guardian on ETMX (test phase)

Morning

• HP coil driver modification ? (Yamada, Fabian, Terrence)

Standing issues

• Try FPPRMI: with stable 3f signals and ALS extra range, FPPRMI may fix the glitches?
• X end cry cooler replaced. EX frige can be operated. Plan to be decided tomorrow.
• DGS maintenance maybe better on Monday morning?
• Fast shut off feature on type-A after lockloss not to ring (real time model change, Stefan)
• Y-arm lock
  • ETMY suspension control

    • L2Angle decoupling

    • ETMY coil driver range increase
• DRMI lock stability
  • Model HOM-PHD signal distortion (Aso, Kokeyama)
  • Search for better Gouy phase in PRC
• Initial alignment automation
• Type-A related
  • Guardian modification according to the coil driver modification
  • Implement BF stage control on ALINED state on type-A guardian
• Type-B related
  • SR3 Yaw motion is too large
    • Different ground level between the IO chasis and the AA filter box may be the reason
    • Replace the DC power supply
• Type-C related
  • OSEM characterization for OSTM
• OMC
  • Check the OMC on the AS table
• Laser safety
  • Debug the laser safety guardian

Task list

• Phase1

• Phase2

• Preparation for joining O3

Schedule

Working people assignment

• KAGRA Commissioning Planner

Readiness for the X arm commissioning

• https://docs.google.com/spreadsheets/d/1S2gyFkyajlbPXMKCrqJV7181YFHUxUgPRB6SXz4z4jI/edit?usp=sharing

Meetings

Daily Meetings (9AM, 1PM)

Zoom URL: https://zoom.us/j/7631499341

Weekly Meetings (Tuesday 11AM)

Zoom URL: https://zoom.us/j/6676627462

Daily meeting

• Date and time: Every weekday, 9AM
• First ~10min in the morning meeting, as short as possible
• Location: Control room and Fan hut connected by eZuce

2019/7/17(Wed.)

Schedule

• ~7/31: Trial for DRMI with polarization.
• 7/6~: Trial for mass lock
• ITMX
• ETMX
• ITMY
• ETMY
• Long term:

  • 5/27-6/30: DRMI commissioning

  • 7/1-8/9: FPMI/DRFPMI commissioning
  • 8/12-10/4: ASC
  • 10/7-11/15: Post Commissioning
  • 11/18-12/13: Noise hunting

Note

• We have 1pm meeting more seriously. It will discuss next 24 house commissioning plan.
• Please write down klog when your work is done and if you will have something to be announced.

Night work

Weekend

Report of work

• Y arm mass lock had some progress on suppressing error signal. Not

Work plan

• Coil driver for mass lock will be upgrade to have more current.
• SR3 noise will be checked and probably power supply will be exchanged.
• OMC will be extracted in the morning.
• DGS: maintenance for exchanging DC power supply for IO chassis for SR3 and SR2.
• Team PC exchange will be postponed.
• Type A model will be restarted.

Weekly meeting

• Date and time: Every Tuesday, 11AM
• Location: Meeting room at Hokubukaikan, or Zoom

Other meetings

• 2019/6/11: Summery meeting for E Run 1 Agenda, Minute

• 2019/6/5: Meeting for E Run on 6/8 Agenda, Minute

• 2019/3/8: Scheduling for FPMI Agenda, Minute

• 2018/9/3: Extended chief meeting for Arm commissioning Agenda, Minute

• 2018/8/30: 3rd Meeting for pump down at ITMX (Minute, Check list)

• 2018/8/23: 2nd Meeting for pump down at ITMX (Minute, Check list)

• 2018/8/16: Meeting for pump down at ITMX (Minute, Check list)

• 2018/5/28: Meeting for looking back to phase1 for future of KAGRA as an extended chief meeting.

• 2018/4/11: Meeting for pump down test at ETMX 2 (Minute, Check list)

• 2018/4/5: Meeting for pump down test at ETMX 1 (Minute, Check list)

• 2018/3/14: Meeting for pump down test at Center are (Minute, Check list)

• 2018/1/18: Meeting for pump down and cooling at ETMY3 (Minute, Check list)

• 2018/1/17: Meeting for pump down and cooling at ETMY2 (Minute, Check list)

• 2018/1/10: Meeting for pump down and cooling at ETMY1 (Minute, Check list)

• 2017/12/13: Meeting for pump down at ETMY (Minute, schedule)

• 2017/11/27~12/1Commissioning Workshop 2017

• 2017/11/17: Meeting for closing ETY (Minute)

• 2017/10/12: Meeting about PR2 pitch misalignment (Minute)

Documents

• Commissioning plan for Phase1

Communication tools

• KAGRA commissioning Mailing List

• wiki
  • Task list (Phase base, stage base)

  • Meetings (morning, weekly)

• Scheduler

• Task assignment list (example)

• klog

• Issue tracker: Bugzilla (currently site internal only)

for New members

• Joining commissioning Mailing List